Recent advances and trends in numerical techniques for process simulation

The gradually increasing complexity of the processing models and necessity to simulate in higher dimensions persistently challenge computational efficiency of the modern process simulators. In this paper, an outlook on the current status and trends in numerical techniques for efficient multidimensional bulk process simulation is given. Grid generation, grid adaptation, discretization and solving techniques are considered as the principle numerical building blocks of modern process simulation tools. The major task and obstacles for each of these numerical segments are recognized and some recently proposed techniques to circumvent current limitations as well as possible directions for future research are discussed.

[1]  Rex E. Lowther.  A discretization scheme that allows coarse grid-spacing in finite-difference process simulation , 1989, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[2]  Hui Zhang,et al.  A general numerical procedure for multilayer multistep IC process simulation , 1994, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[3]  Jun Ueda,et al.  A general-purpose two-dimensional process simulator-OPUS for arbitrary structures , 1989, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[4]  Weizhang Huang,et al.  A Simple Adaptive Grid Method in Two Dimensions , 1994, SIAM J. Sci. Comput..

[5]  Siegfried Selberherr,et al.  Simulation of critical IC-fabrication steps , 1985, IEEE Transactions on Electron Devices.

[6]  Gehan A. J. Amaratunga,et al.  Adaptive meshing schemes for simulating dopant diffusion , 1990, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[7]  Siegfried Selberherr,et al.  A General Simulation Method for Etching and Deposition Processes , 1993 .

[8]  W. Joppich,et al.  Process Simulation for Nonplanar Structures with the Multigrid Solver LiSS , 1993 .

[9]  M. E. Law,et al.  Challenges to Achieving Accurate Three-Dimensional Process Simulation , 1993 .

[10]  R. LeVeque,et al.  A comparison of the extended finite element method with the immersed interface method for elliptic equations with discontinuous coefficients and singular sources , 2006 .

[11]  Slobodan Mijalkovic,et al.  Exponentially fitted discretization schemes for diffusion process simulation on coarse grids , 1996, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[12]  E. Leitner,et al.  Process simulation for the 1990s , 1995 .

[13]  Klaus Stüben,et al.  Adaptive Multigrid on Distributed Memory Computers , 1994 .

[14]  Shinji Odanaka,et al.  SMART-P: rigorous three-dimensional process simulator on a supercomputer , 1988, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[15]  Emmanuel Dubois,et al.  Adaptive mesh refinement for multilayer process simulation using the finite element method , 1992, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[16]  Ke Chen.  Error Equidistribution and Mesh Adaptation , 1994, SIAM J. Sci. Comput..

[17]  Randolph E. Bank,et al.  Transient simulation of silicon devices and circuits , 1985 .

[18]  R. Bank,et al.  Some a posteriori error estimators for elliptic partial differential equations , 1985 .

[19]  Ernst Rank,et al.  A simulation system for diffusive oxidation of silicon: a two-dimensional finite element approach , 1990, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[20]  Karl Steger,et al.  Method of temporary coordinate domains for moving boundary value problems [semiconductor processing simulation] , 1993, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[21]  Mark E. Law,et al.  Automatic grid refinement and higher order flux discretization for diffusion modeling , 1993, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[22]  Heiner Ryssel,et al.  COMPOSITE -- A Complete Modeling Program of Silicon Technology , 1985, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems.

[23]  Ninoslav Stojadinovic,et al.  Music - a multigrid simulator for IC fabrication processes , 1991 .

[24]  S. Selberherr,et al.  Simulation of Critical IC-Fabrication Steps , 1985, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems.

[25]  B. Penumalli,et al.  A comprehensive two-dimensional VLSI process simulation program, BICEPS , 1983, IEEE Transactions on Electron Devices.

[26]  Hubert Ritzdorf,et al.  Li SS - An Environment for the Parallel Multigrid Solution of Partial Differential Equations on General 2D Domains , 1994, Parallel Comput..

[27]  Robert W. Dutton,et al.  Grid and Geometry Techniques for Multi-Layer Process Simulation , 1993 .

[28]  Albert Seidl,et al.  Numerical Conformal Mapping for Treatment of Geometry Problems in Process Simulation , 1985, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems.

[29]  S. Mijalkovic,et al.  Multigrid Methods for Process Simulation , 1994 .