Ablation resistance of supersonic-atmosphere-plasma-spraying ZrC coating doped with ZrO2 for SiC-coated carbon/carbon composites

[1]  Hejun Li,et al.  Effect of Monolithic LaB6 on the Ablation Resistance of ZrC/SiC Coating Prepared by Supersonic Plasma Spraying for C/C Composites , 2016 .

[2]  Q. Fu,et al.  Ablation resistance of wedge-shaped C/C-ZrB2-ZrC-SiC composites exposed to an oxyacetylene torch , 2016 .

[3]  Hejun Li,et al.  Ablation resistance of ZrC/SiC gradient coating for SiC-coated carbon/carbon composites prepared by supersonic plasma spraying , 2016 .

[4]  Yulei Zhang,et al.  HfC nanowires to improve the toughness and oxidation resistance of Si-Mo-Cr/SiC coating for C/C composites , 2016 .

[5]  Hejun Li,et al.  Ablation behavior of ZrC-La2O3 coating for SiC-coated carbon/carbon composites under an oxyacetylene torch , 2016 .

[6]  Xiaohong Shi,et al.  Oxidation resistance of a La–Mo–Si–O–C coating prepared by Supersonic Atmosphere Plasma Spraying on the surface of SiC-coated C/C composites , 2016 .

[7]  Hejun Li,et al.  Ablation resistance of HfC–SiC coating prepared by supersonic atmospheric plasma spraying for SiC-coated C/C composites , 2016 .

[8]  Hejun Li,et al.  Ablation behavior of rare earth La-modified ZrC coating for SiC-coated carbon/carbon composites under an oxyacetylene torch , 2016 .

[9]  Hejun Li,et al.  Ablation resistance of SiC–HfC–ZrC multiphase modified carbon/carbon composites , 2016 .

[10]  Hejun Li,et al.  Effects of high-temperature annealing on the microstructures and mechanical properties of C/C–ZrC–SiC composites prepared by precursor infiltration and pyrolysis , 2016 .

[11]  Hejun Li,et al.  Effect of ZrO2 morphology on the ablation resistance of carbon/carbon composites containing ZrC prepared by the carbothermal reduction reaction , 2016 .

[12]  Hejun Li,et al.  Ablation behaviour of C/C and C/C–ZrC–SiC composites with cone-shaped holes under an oxyacetylene flame , 2016 .

[13]  Yulei Zhang,et al.  SiC nanowire toughened ZrB2–SiC ablative coating for SiC coated C/C composites , 2015 .

[14]  Kezhi Li,et al.  Ablation behaviour of C/C–ZrC composites in a solid rocket motor environment , 2015 .

[15]  Liping Wang,et al.  Ablation mechanism of C/C–ZrB2–ZrC–SiC composite fabricated by polymer infiltration and pyrolysis with preform of Cf/ZrB2 , 2015 .

[16]  Qizhong Huang,et al.  Microstructure and ablation behavior of C/C–HfC composites prepared by precursor infiltration and pyrolysis , 2015 .

[17]  Suhrit Mula,et al.  Surface morphology evolution and ablation mechanism of SiC–Si multiphase ceramic coating on graphite under oxy-acetylene flame , 2014 .

[18]  Xiaohong Shi,et al.  Ablation resistance of SiC–ZrC coating prepared by a simple two-step method on carbon fiber reinforced composites , 2014 .

[19]  Rongjun Liu,et al.  Ablation behavior and mechanism of C/ZrC, C/ZrC–SiC and C/SiC composites fabricated by polymer infiltration and pyrolysis process , 2014 .

[20]  Hejun Li,et al.  Microstructure and ablation resistance of carbon/carbon composites with a zirconium carbide rich surface layer , 2014 .

[21]  P. David,et al.  High temperature oxidation of two- and three-dimensional hafnium carbide and silicon carbide coatings , 2014 .

[22]  D. Sciti,et al.  High temperature oxidation of Zr- and Hf-carbides: Influence of matrix and sintering additive , 2013 .

[23]  Wei Sun,et al.  HfC/ZrC ablation protective coating for carbon/carbon composites , 2013 .

[24]  D. Sciti,et al.  Microstructural characterization of ZrC-MoSi2 composites oxidized in air at high temperatures , 2013 .

[25]  Curtis R. Taylor,et al.  Very hard ZrC thin films grown by pulsed laser deposition , 2013 .

[26]  Wei Sun,et al.  Preparation and ablation properties of Hf(Ta)C co-deposition coating for carbon/carbon composites , 2013 .

[27]  Wei Sun,et al.  Ablation behavior of HfC protective coatings for carbon/carbon composites in an oxyacetylene combustion flame , 2012 .

[28]  Ling-jun Guo,et al.  Morphology, thermal response and anti-ablation performance of 3D-four directional pitch-based carbon/carbon composites , 2012 .

[29]  Wei Sun,et al.  Structural evolution and ablation mechanism of a hafnium carbide coating on a C/C composite in an oxyacetylene torch environment , 2012 .

[30]  A. Maître,et al.  Synthesis of zirconium oxycarbide (ZrCxOy) powders: Influence of stoichiometry on densification kinetics during spark plasma sintering and on mechanical properties , 2011 .

[31]  Hejun Li,et al.  Microstructures and Ablation Resistance of ZrC Coating for SiC-Coated Carbon/Carbon Composites Prepared by Supersonic Plasma Spraying , 2011 .

[32]  F. Goutier,et al.  Purification of hot-pressed ZrCO into ZrC by a laser treatment , 2011 .

[33]  Guo‐Jun Zhang,et al.  Densification behavior and properties of hot-pressed ZrC ceramics with Zr and graphite additives , 2011 .

[34]  Hui Li,et al.  Structure–property differences between supersonic and conventional atmospheric plasma sprayed zirconia thermal barrier coatings , 2011 .

[35]  G. Wen,et al.  Formation of ZrC ablation protective coatings on carbon material by tungsten inert gas cladding technique , 2010 .

[36]  C. Hong,et al.  Ablation behavior of ZrB2–SiC–ZrO2 ceramic composites by means of the oxyacetylene torch , 2009 .

[37]  Lai-fei Cheng,et al.  Ablation of pierced C/C composite nozzles in an oxygen/ethanol combustion gas generator , 2009 .

[38]  M. Nygren,et al.  Spark plasma sintering and mechanical behaviour of ZrC-based composites , 2008 .

[39]  Erica L. Corral,et al.  Ultra‐High‐Temperature Ceramic Coatings for Oxidation Protection of Carbon–Carbon Composites , 2008 .

[40]  S. Isotani,et al.  X-ray photoelectron spectroscopy analysis of zirconium nitride-like films prepared on Si(100) substrates by ion beam assisted deposition , 2008 .

[41]  A. Metcalfe.  Gas Evolution During Oxidation of Refractory Borides and Carbides at 1500{degree sign}C to 2700{degree sign}C , 2007 .

[42]  E. Opila,et al.  UHTCs: Ultra-High Temperature Ceramic Materials for Extreme Environment Applications , 2007 .

[43]  Donald M. Curry,et al.  Oxidation microstructure studies of reinforced carbon/carbon , 2006 .

[44]  M. Braic,et al.  Surface chemistry of plasma deposited ZrC hard coatings , 2005 .

[45]  M. Ferraris,et al.  Oxidation protective multilayer coatings for carbon-carbon composites , 2002 .

[46]  L. Stefano,et al.  Milling effects upon quantitative determinations of chrysotile asbestos by the reference intensity ratio method , 2000, Powder Diffraction.

[47]  A. Maître,et al.  Solid state reaction of zirconia with carbon , 1997 .

[48]  Shanyi Du,et al.  Oxidation and ablation of 3D carbon-carbon composite at up to 3000 °C , 1995 .

[49]  G. Savage.  Carbon-carbon composites , 1993 .

[50]  D. Bish,et al.  Quantitative phase analysis using the Rietveld method , 1988 .

[51]  M. W. Chase.  JANAF thermochemical tables , 1986 .