Unique transition of yielding mechanism and unexpected activation of deformation twinning in ultrafine grained Fe-31Mn-3Al-3Si alloy

[1]  N. Tsuji,et al.  Grain Size Altering Yielding Mechanisms in Ultrafine Grained High-Mn Austenitic Steel: Advanced TEM Investigations , 2021, SSRN Electronic Journal.

[2]  N. Tsuji,et al.  A correlation between grain boundary character and deformation twin nucleation mechanism in coarse-grained high-Mn austenitic steel , 2021, Scientific Reports.

[3]  I. Tanaka,et al.  Corrigendum to ‘Strategy for Managing Both High Strength and Large Ductility in Structural Materials - sequential nucleation of different deformation modes based on a concept of plaston’ [Scripta Materialia 181 (2020) 35-42/ SMM 13102] , 2021 .

[4]  N. Tsuji,et al.  Tensile Deformation of Ultrafine-Grained Fe-Mn-Al-Ni-C Alloy Studied by In Situ Synchrotron Radiation X-ray Diffraction , 2020, Crystals.

[5]  N. Tsuji,et al.  Two-stage Hall-Petch relationship in Cu with recrystallized structure , 2020 .

[6]  I. Tanaka,et al.  Strategy for managing both high strength and large ductility in structural materials–sequential nucleation of different deformation modes based on a concept of plaston , 2020 .

[7]  N. Tsuji,et al.  Change of Deformation Mechanisms Leading to High Strength and Large Ductility in Mg-Zn-Zr-Ca Alloy with Fully Recrystallized Ultrafine Grained Microstructures , 2019, Scientific Reports.

[8]  N. Tsuji,et al.  Formation Mechanism of Ultrafine Grained Microstructures: Various Possibilities for Fabricating Bulk Nanostructured Metals and Alloys , 2019, MATERIALS TRANSACTIONS.

[9]  Yang Cao,et al.  Grain size effect on deformation twin thickness in a nanocrystalline metal with low stacking-fault energy , 2019, Journal of Materials Research.

[10]  N. Tsuji,et al.  Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high / medium entropy alloys , 2019, Acta Materialia.

[11]  N. Tsuji,et al.  Hydrogen embrittlement behaviors of ultrafine-grained 22Mn–0.6C austenitic twinning induced plasticity steel , 2017 .

[12]  N. Tsuji,et al.  Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing , 2017 .

[13]  N. Tsuji,et al.  Simultaneously enhanced strength and ductility of Mg-Zn-Zr-Ca alloy with fully recrystallized ultrafine grained structures , 2017 .

[14]  H. Adachi,et al.  Elastic and Plastic Deformation Behavior Studied by In-Situ Synchrotron X-ray Diffraction in Nanocrystalline Nickel , 2016 .

[15]  H. Adachi,et al.  In-situ X-ray diffraction during tensile deformation of ultrafine-grained copper using synchrotron radiation , 2016 .

[16]  N. Tsuji,et al.  Effect of grain refinement on hydrogen embrittlement behaviors of high-Mn TWIP steel , 2016 .

[17]  M. C. Chen,et al.  Enhanced Strength and Ductility in an Ultrafine-Grained Fe-22Mn-0.6C Austenitic Steel Having Fully Recrystallized Structure , 2014, Metallurgical and Materials Transactions A.

[18]  S. Zaefferer,et al.  Theory and application of electron channelling contrast imaging under controlled diffraction conditions , 2014 .

[19]  N. Hansen,et al.  Exploring the limit of dislocation based plasticity in nanostructured metals. , 2014, Physical review letters.

[20]  N. Tsuji,et al.  Fully recrystallized nanostructure fabricated without severe plastic deformation in high-Mn austenitic steel , 2013 .

[21]  M. Koyama,et al.  TWIP Effect and Plastic Instability Condition in an Fe-Mn-C Austenitic Steel , 2013 .

[22]  Young‐kook Lee.  Microstructural evolution during plastic deformation of twinning-induced plasticity steels , 2012 .

[23]  R. Ueji,et al.  Effect of Grain Size and Grain Orientation on Dislocations Structure in Tensile Strained TWIP Steel During Initial Stages of Deformation , 2012 .

[24]  D. Raabe,et al.  Dislocation and twin substructure evolution during strain hardening of an Fe-22 wt.% Mn-0.6 wt.% C TWIP steel observed by electron channeling contrast imaging , 2011 .

[25]  O. Bouaziz,et al.  High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships , 2011 .

[26]  O. Bouaziz,et al.  Effect of chemical composition on work hardening of Fe—Mn—C TWIP steels , 2011 .

[27]  A. Najafizadeh,et al.  TENSILE DEFORMATION BEHAVIOR OF HIGH MANGANESE AUSTENITIC STEEL: THE ROLE OF GRAIN SIZE , 2010 .

[28]  W. Liu,et al.  Influence of grain size on the density of deformation twins in Cu–30%Zn alloy , 2010 .

[29]  D. Raabe,et al.  The effect of grain size and grain orientation on deformation twinning in a Fe-22 wt.% Mn-0.6 wt.% C TWIP steel , 2010 .

[30]  U. Prahl,et al.  Derivation and Variation in Composition-Dependent Stacking Fault Energy Maps Based on Subregular Solution Model in High-Manganese Steels , 2009 .

[31]  D. Raabe,et al.  Electron channeling contrast imaging of twins and dislocations in twinning-induced plasticity steels under controlled diffraction conditions in a scanning electron microscope , 2009 .

[32]  N. Tsuji,et al.  Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed , 2009 .

[33]  Anand Asundi,et al.  Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review , 2009 .

[34]  L. Kestens,et al.  Microstructure and texture evolution during cold rolling and annealing of a high Mn TWIP steel , 2009 .

[35]  N. Tsuji,et al.  Tensile properties and twinning behavior of high manganese austenitic steel with fine-grained structure , 2008 .

[36]  Daisuke Terada,et al.  Managing Both Strength and Ductility in Ultrafine Grained Steels , 2008 .

[37]  Terence G. Langdon,et al.  Using high-pressure torsion for metal processing: Fundamentals and applications , 2008 .

[38]  O. Bouaziz,et al.  Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels , 2008 .

[39]  Masato Kawamukai,et al.  A multiscale approach for modeling scale-dependent yield stress in polycrystalline metals , 2007 .

[40]  T. Ungár.  Characterization of nanocrystalline materials by X-ray line profile analysis , 2007 .

[41]  R. Valiev,et al.  Principles of equal-channel angular pressing as a processing tool for grain refinement , 2006 .

[42]  L. Balogh,et al.  Stacking faults and twin boundaries in fcc crystals determined by x-ray diffraction profile analysis , 2006 .

[43]  S. Roux,et al.  Digital Image Correlation: from Displacement Measurement to Identification of Elastic Properties – a Review , 2005, physics/0511122.

[44]  P. Kao,et al.  Transition of tensile deformation behaviors in ultrafine-grained aluminum , 2005 .

[45]  B. Blanpain,et al.  Cold rolling behaviour of an austenitic Fe–30Mn–3Al–3Si TWIP-steel: the importance of deformation twinning , 2004 .

[46]  B. Schmitt,et al.  Plastic Deformation with Reversible Peak Broadening in Nanocrystalline Nickel , 2004, Science.

[47]  N. Hansen,et al.  Deformation structures developing on fine scales , 2003 .

[48]  E. Ma,et al.  Instabilities and ductility of nanocrystalline and ultrafine-grained metals , 2003 .

[49]  Seong-Hee Lee,et al.  ARB (Accumulative Roll‐Bonding) and other new Techniques to Produce Bulk Ultrafine Grained Materials , 2003 .

[50]  N. Tsuji,et al.  Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing , 2002 .

[51]  N. Hansen,et al.  New discoveries in deformed metals , 2001 .

[52]  N. Hansen,et al.  Graded nanostructures produced by sliding and exhibiting universal behavior. , 2001, Physical review letters.

[53]  N. Hansen,et al.  Microstructure and strength of nickel at large strains , 2000 .

[54]  S. Kalidindi,et al.  Influence of grain size and stacking-fault energy on deformation twinning in fcc metals , 1999 .

[55]  G. Frommeyer,et al.  Effect of martensitic phase transformation and deformation twinning on mechanical properties of Fe–Mn–Si–AI steels , 1998 .

[56]  A. Wilkinson,et al.  ELECTRON DIFFRACTION BASED TECHNIQUES IN SCANNING ELECTRON MICROSCOPY OF BULK MATERIALS , 1997, 1904.05550.

[57]  Hiroshi Takechi,et al.  Metallurgical Aspects on Interstitial Free Sheet Steel From Industrial Viewpoints , 1994 .

[58]  G. Chin,et al.  Comments on deformation twinning in silver- and copper-alloy crystals , 1975 .

[59]  K. West,et al.  Determination of the Gaussian and Lorentzian content of experimental line shapes , 1974 .

[60]  J. Weertman,et al.  A dislocation model for twinning in f.c.c. metals , 1963 .

[61]  J. Venables.  Deformation twinning in face-centred cubic metals , 1961 .

[62]  N. Tsuji,et al.  Remarkable transitions of yield behavior and Lüders deformation in pure Cu by changing grain sizes , 2018 .

[63]  Y. Estrin,et al.  Twinning-induced plasticity (TWIP) steels , 2018 .

[64]  N. Tsuji,et al.  Yielding Behavior and Its Effect on Uniform Elongation of Fine Grained IF Steel , 2014 .

[65]  N. Tsuji,et al.  Evaluation of Dislocation Density for 1100 Aluminum with Different Grain Size during Tensile Deformation by Using In-Situ X-ray Diffraction Technique , 2014 .

[66]  Dierk Raabe,et al.  Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, , 2013 .

[67]  N. Tsuji,et al.  Change in Mechanical Properties and Microstructure of ARB Processed Ti during Annealing , 2008 .

[68]  S. Sikdar,et al.  Fundamentals and applications , 1998 .

[69]  Robert C. Wolpert,et al.  A Review of the , 1985 .

[70]  G. T. V. Rooyen.  Basic factors which influence the Lüders strain during discontinuous yielding , 1971 .

[71]  G. K. Williamson,et al.  III. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrum , 1956 .

[72]  N. Petch,et al.  The Cleavage Strength of Polycrystals , 1953 .

[73]  A. Cottrell,et al.  Dislocation Theory of Yielding and Strain Ageing of Iron , 1949 .

[74]  Eberhard Spiller,et al.  X-Ray Optics , 1949, Nature.