论文信息 - Fabrication of 3.1kV/10A 4H-SiC Junction Barrier Schottky Diodes

Fabrication of 3.1kV/10A 4H-SiC Junction Barrier Schottky Diodes

A 4H-SiC Junction Barrier Schottky Diodes(JBSs) based on 30μm, 3×1015 cm-3 epitaxial structures was fabricated by using metal Ti as the Schottky metal. The Non-linearly limit field rings (NL-FLRs) is used as termination for protecting the anode edge. The fabricated device shows a breakdown voltage of 3.1kV at reverse leakage current of 200uA and the forward current of 11A at the voltage drop of 3 V, corresponding to a current density of 275A/cm2, of which the on-resistance is 7.3 mΩ·cm2. Finally, the 5266 MW/cm2 BFOM value of fabricated SiC JBSs is achieved. The results show our fabricated SiC JBSs has an excellent performance.

[1] Zhang Yuming,et al. Influence of geometrical parameters on the behaviour of SiC merged PiN Schottky rectifiers with junction termination extension , 2010 .

[2] Lin Zhu,et al. Analytical Modeling of High-Voltage 4H-SiC Junction Barrier Schottky (JBS) Rectifiers , 2008, IEEE Transactions on Electron Devices.

[3] Wang Jue,et al. 1.4 kV 4H-SiC PiN diode with a robust non-uniform floating guard ring termination , 2014 .

[4] Yuming Zhang,et al. 4H-SiC trench gate MOSFETs with field plate termination , 2014 .

[5] Yoshitaka Sugawara,et al. 3.6 kV 4H-SiC JBS Diodes with Low RonS , 2000 .