Multifunctional Carbon Fiber Composites: A Structural, Energy Harvesting, Strain-Sensing Material

Multifunctional structural materials are capable of reducing system level mass and increasing efficiency in load-carrying structures. Materials that are capable of harvesting energy from the surrounding environment are advantageous for autonomous electrically powered systems. However, most energy harvesting materials are non-structural and add parasitic mass, reducing structural efficiency. Here, we show a structural energy harvesting composite material consisting of two carbon fiber (CF) layers embedded in a structural battery electrolyte (SBE) with a longitudinal modulus of 100 GPa—almost on par with commercial CF pre-pregs. Energy is harvested through mechanical deformations using the piezo-electrochemical transducer (PECT) effect in lithiated CFs. The PECT effect creates a voltage difference between the two CF layers, driving a current when deformed. A specific power output of 18 nW/g is achieved. The PECT effect in the lithiated CFs is observed in tension and compression and can be used for strain sensing, enabling structural health monitoring with low added mass. The same material has previously been shown capable of shape morphing. The two additional functionalities presented here result in a material capable of four functions, further demonstrating the diverse possibilities for CF/SBE composites in multifunctional applications in the future.

[1]  M. Koç,et al.  A comprehensive review on the state-of-the-art of piezoelectric energy harvesting , 2021, Nano Energy.

[2]  G. Lindbergh,et al.  A Structural Battery and its Multifunctional Performance , 2021, Advanced Energy and Sustainability Research.

[3]  G. Lindbergh,et al.  Potassium-insertion in polyacrylonitrile-based carbon fibres for multifunctional energy storage, morphing, and strain-sensing , 2021 .

[4]  F. Larsson,et al.  Electro-chemo-mechanically coupled computational modelling of structural batteries , 2020, Multifunctional Materials.

[5]  C. Arnold,et al.  Figures of Merit for Piezoelectrochemical Energy-Harvesting Systems , 2020 .

[6]  G. Lindbergh,et al.  Shape-morphing carbon fiber composite using electrochemical actuation , 2020, Proceedings of the National Academy of Sciences.

[7]  Kathleen Moyer,et al.  Continuous Energy Harvesting and Motion Sensing from Flexible Electrochemical Nanogenerators: Toward Smart and Multifunctional Textiles. , 2020, ACS nano.

[8]  G. Lindbergh,et al.  Model of a structural battery and its potential for system level mass savings , 2019, Multifunctional Materials.

[9]  D. Zenkert,et al.  Bicontinuous Electrolytes via Thermally Initiated Polymerization for Structural Lithium Ion Batteries , 2019, ACS Applied Energy Materials.

[10]  Andreas Lendlein,et al.  Multifunctional materials: concepts, function-structure relationships, knowledge-based design, translational materials research , 2018, Multifunctional Materials.

[11]  C. Pint,et al.  A Fully Transient Mechanical Energy Harvester , 2018, Advanced Materials Technologies.

[12]  F. Avilés,et al.  Piezoresistivity, Strain, and Damage Self‐Sensing of Polymer Composites Filled with Carbon Nanostructures , 2018 .

[13]  P. Vereecken,et al.  Bending impact on the performance of a flexible Li4Ti5O12-based all-solid-state thin-film battery , 2018, Science and technology of advanced materials.

[14]  G. Lindbergh,et al.  Multifunctional Performance of Sodiated Carbon Fibers , 2018 .

[15]  Rachel Carter,et al.  Ultralow Frequency Electrochemical–Mechanical Strain Energy Harvester Using 2D Black Phosphorus Nanosheets , 2017 .

[16]  Sangtae Kim,et al.  Electrochemically driven mechanical energy harvesting , 2016, Nature Communications.

[17]  G. Lindbergh,et al.  High Precision Coulometry of Commercial PAN-Based Carbon Fibers as Electrodes in Structural Batteries , 2016 .

[18]  C. Arnold,et al.  Toward Low‐Frequency Mechanical Energy Harvesting Using Energy‐Dense Piezoelectrochemical Materials , 2015, Advanced materials.

[19]  G. Lindbergh,et al.  Piezo-Electrochemical Energy Harvesting with Lithium-Intercalating Carbon Fibers. , 2015, ACS applied materials & interfaces.

[20]  Craig B. Arnold,et al.  On the coupling between stress and voltage in lithium-ion pouch cells , 2014, Sensing Technologies + Applications.

[21]  Changki Mo,et al.  Recent Advances in Energy Harvesting Technologies for Structural Health Monitoring Applications , 2014 .

[22]  G. Lindbergh,et al.  The effect of lithium-intercalation on the mechanical properties of carbon fibres , 2014 .

[23]  Hirotaka Igawa,et al.  Structural health monitoring by using fiber-optic distributed strain sensors with high spatial resolution , 2013 .

[24]  G. Lindbergh,et al.  Piezo-electrochemical effect in lithium-intercalated carbon fibres , 2013 .

[25]  Dan Zenkert,et al.  Expansion of carbon fibres induced by lithium intercalation for structural electrode applications , 2013 .

[26]  M. A. Wahab,et al.  Piezoelectric fiber composite transducers for health monitoring in composite structures , 2013 .

[27]  David T. Fullwood,et al.  Strain monitoring of carbon fiber composite via embedded nickel nano-particles , 2012 .

[28]  Jaehwan Kim,et al.  A review of piezoelectric energy harvesting based on vibration , 2011 .

[29]  Constantinos Soutis,et al.  Structural health monitoring techniques for aircraft composite structures , 2010 .

[30]  A. Bower,et al.  In Situ Measurements of Stress-Potential Coupling in Lithiated Silicon , 2010, 1108.0372.

[31]  David R. Smith,et al.  Integration of Networks of Sensors and Electronics for Structural Health Monitoring of Composite Materials , 2010 .

[32]  S. Priya.  Advances in energy harvesting using low profile piezoelectric transducers , 2007 .

[33]  Kunigal N. Shivakumar,et al.  Mechanics of Failure of Composite Laminates with an Embedded Fiber Optic Sensor , 2004 .

[34]  D. Chung,et al.  Self-sensing of Damage and Strain in Carbon Fiber Polymer-Matrix Structural Composites by Electrical Resistance Measurement , 2003 .

[35]  J. Cahn,et al.  A linear theory of thermochemical equilibrium of solids under stress , 1973 .