Effect of fiber treatments on the sisal fiber properties and fiber–matrix bond in cement based systems

Abstract This experimental research investigation aims to explain the influence of several treatments on the sisal fiber properties and bonding strength with a cement based matrix free of calcium hydroxide. Four different treatments were studied: hornification, alkali treatment with calcium hydroxide, polymer impregnation with styrene butadiene and a combination of hornification and polymer impregnation. Modifications in the sisal fiber structure were investigated by X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infra-red spectroscopy (FTIR) and scanning electron microscopy (SEM). Water absorption and direct tensile tests were performed on the fibers to determine the influence of the treatments on their physical and mechanical properties. In order to study the sisal fiber–matrix bond, pullout tests were performed in fiber embedment lengths of 5, 10, 25 and 50 mm. All applied treatments resulted in a reduction of the water absorption capacity and increase in tensile strength and stiffness. Significant improvements in the fiber–matrix interface were verified through the pullout test for the several used treatments. The hornification treatment increased the elastic and frictional bond, whereas the polymer and hybrid treatments resulted in a fiber slip-hardening behavior.

[1]  I. Mondragon,et al.  Thermal and crystallization studies of short flax fibre reinforced polypropylene matrix composites: Effect of treatments , 2006 .

[2]  Barzin Mobasher,et al.  Effect of fiber shape and morphology on interfacial bond and cracking behaviors of sisal fiber cement based composites , 2011 .

[3]  R. K. Basak,et al.  Improvement in mechanical properties of jute fibres through mild alkali treatment as demonstrated by utilisation of the Weibull distribution model. , 2012, Bioresource technology.

[4]  Kyosti V. Sarkanen,et al.  Lignins : occurrence, formation, structure and reactions , 1971 .

[5]  Romildo Dias Toledo Filho,et al.  Durability of compression molded sisal fiber reinforced mortar laminates , 2009 .

[6]  Romildo Dias Toledo Filho,et al.  Tensile behavior of high performance natural (sisal) fibers , 2008 .

[7]  S. K. Rout,et al.  Influence of fibre-surface treatment on structural, thermal and mechanical properties of jute , 2008 .

[8]  B. Adhikari,et al.  Chemically modified jute fibre reinforced non-pressure (NP) concrete pipes with improved mechanical properties , 2012 .

[9]  Ramkrishna Sen,et al.  Enhancement of tensile strength of lignocellulosic jute fibers by alkali-steam treatment. , 2010, Bioresource technology.

[10]  L. Lebrun,et al.  Effect of chemical treatments on water sorption and mechanical properties of flax fibres. , 2009, Bioresource technology.

[11]  F. A. Silva,et al.  Mechanical Behavior of Natural Sisal Fibers , 2010 .

[12]  A. Netravali,et al.  Mercerization of sisal fibers: Effect of tension on mechanical properties of sisal fiber and fiber-reinforced composites , 2010 .

[13]  P. Methacanon,et al.  Properties and potential application of the selected natural fibers as limited life geotextiles , 2010 .

[14]  Selvin P. Thomas,et al.  Effect of fiber surface modification on the mechanical and water absorption characteristics of sisal/polyester composites fabricated by resin transfer molding , 2009 .

[15]  M. Beg,et al.  Accelerated weathering of unbleached and bleached Kraft wood fibre reinforced polypropylene composites , 2008 .

[16]  N. Chawla,et al.  An experimental investigation of the fatigue behavior of sisal fibers , 2009 .

[17]  Anil N. Netravali,et al.  Composites get greener , 2003 .

[18]  Haiping Yang,et al.  Characteristics of hemicellulose, cellulose and lignin pyrolysis , 2007 .

[19]  L. Segal',et al.  An Empirical Method for Estimating the Degree of Crystallinity of Native Cellulose Using the X-Ray Diffractometer , 1959 .

[20]  F. A. Silva,et al.  Cracking mechanisms in durable sisal fiber reinforced cement composites , 2009 .

[21]  A. Sombra,et al.  Dwarf-green coconut fibers: A versatile natural renewable raw bioresource. Treatment, morphology, and physicochemical properties , 2010, BioResources.

[22]  Yan Li,et al.  Interfacial studies of sisal fiber reinforced high density polyethylene (HDPE) composites , 2008 .

[23]  M. Ansell,et al.  Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization , 2002 .

[24]  P. Herrera-Franco,et al.  A study of the mechanical properties of short natural-fiber reinforced composites , 2005 .

[25]  Romildo Dias Toledo Filho,et al.  Degradation kinetics and aging mechanisms on sisal fiber cement composite systems , 2013 .

[26]  F. A. Silva,et al.  Physical and mechanical properties of durable sisal fiber–cement composites , 2010 .

[27]  T. Filho,et al.  Influência de ciclos molhagem-secagem em fibras de sisal sobre a aderência com matrizes de cimento Portland Effect of sisal fiber hornification on the adhesion with portland cement matrices , 2012 .

[28]  D. Rosa,et al.  Properties of sisal fibers treated by alkali solution and their application into cardanol-based biocomposites , 2011 .

[29]  Sidney Mindess,et al.  Fibre Reinforced Cementitious Composites , 1990 .

[30]  Mònica Ardanuy,et al.  Effect of drying and rewetting cycles on the structure and physicochemical characteristics of softwood fibres for reinforcement of cementitious composites , 2010 .