Review: development of clinically relevant scaffolds for vascularised bone tissue engineering.
暂无分享,去创建一个
Jing Lim | S. Teoh | Yuchun Liu | Jing Lim | Yuchun Liu | Swee-Hin Teoh
[1] Chun-Jung Chen,et al. Zinc toxicity on neonatal cortical neurons: involvement of glutathione chelation , 2003, Journal of neurochemistry.
[2] A. Yamazaki,et al. Antibiotic-loaded poly-ε-caprolactone and porous β-tricalcium phosphate composite for treating osteomyelitis , 2008 .
[3] D. Tsukayama. Pathophysiology of posttraumatic osteomyelitis. , 1999, Clinical orthopaedics and related research.
[4] T. Zdeblick,et al. Is INFUSE Bone Graft Superior to Autograft Bone? An Integrated Analysis of Clinical Trials Using the LT-CAGE Lumbar Tapered Fusion Device , 2003, Journal of spinal disorders & techniques.
[5] S. Vengallatore,et al. Nanotechnology and Bone Healing , 2010, Journal of orthopaedic trauma.
[6] H. Haferkamp,et al. In vivo corrosion of four magnesium alloys and the associated bone response. , 2005, Biomaterials.
[7] Wei Song,et al. A novel alkali metals/strontium co-substituted calcium polyphosphate scaffolds in bone tissue engineering. , 2011, Journal of biomedical materials research. Part B, Applied biomaterials.
[8] S. Teoh,et al. Discontinuous release of bone morphogenetic protein-2 loaded within interconnected pores of honeycomb-like polycaprolactone scaffold promotes bone healing in a large bone defect of rabbit ulna. , 2011, Tissue engineering. Part A.
[9] P. Ma,et al. Synthetic nano-scale fibrous extracellular matrix. , 1999, Journal of biomedical materials research.
[10] H. Ohgushi,et al. BMP-induced osteogenesis on the surface of hydroxyapatite with geometrically feasible and nonfeasible structures: topology of osteogenesis. , 1998, Journal of biomedical materials research.
[11] M. Kwan,et al. Cartilage production by rabbit articular chondrocytes on polyglycolic acid scaffolds in a closed bioreactor system , 1995, Biotechnology and bioengineering.
[12] A. Aydın,et al. Magnesium, zinc, copper, manganese, and selenium levels in postmenopausal women with osteoporosis. Can magnesium play a key role in osteoporosis? , 2008, Annals of the Academy of Medicine, Singapore.
[13] V. Guarino,et al. hMSC interaction with PCL and PCL/gelatin platforms: A comparative study on films and electrospun membranes , 2011 .
[14] Guoqiang Chen,et al. Study on the biocompatibility of novel terpolyester poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate). , 2008, Journal of biomedical materials research. Part A.
[15] Perren Sm,et al. Physical and biological aspects of fracture healing with special reference to internal fixation. , 1979, Clinical orthopaedics and related research.
[16] Laura A. Smith,et al. The enhancement of human embryonic stem cell osteogenic differentiation with nano-fibrous scaffolding. , 2010, Biomaterials.
[17] W. Zimmerli,et al. Diagnosis and treatment of infections associated with fracture-fixation devices. , 2006, Injury.
[18] L. Baolin,et al. The effect of bone morphogenetic protein on osseointegration of titanium implants. , 1993, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.
[19] H. Takita,et al. Pore size of porous hydroxyapatite as the cell-substratum controls BMP-induced osteogenesis. , 1997, Journal of biochemistry.
[20] S. Jatana,et al. Neurologic impairment from ectopic bone in the lumbar canal: a potential complication of off-label PLIF/TLIF use of bone morphogenetic protein-2 (BMP-2). , 2008, The spine journal : official journal of the North American Spine Society.
[21] P. F. Nealey,et al. Nanoscale topography of the basement membrane underlying the corneal epithelium of the rhesus macaque , 1999, Cell and Tissue Research.
[22] R. Holmes,et al. Bone Regeneration Within a Coralline Hydroxyapatite Implant , 1979, Plastic and reconstructive surgery.
[23] J. McCarthy,et al. Bone Morphogenetic Protein Promotes Vascularization and Osteoinduction in Preformed Hydroxyapatite in the Rabbit , 1997, Annals of plastic surgery.
[24] Rui L Reis,et al. Bone tissue engineering: state of the art and future trends. , 2004, Macromolecular bioscience.
[25] S. Glassman,et al. Adverse Effects Associated With High-Dose Recombinant Human Bone Morphogenetic Protein-2 Use in Anterior Cervical Spine Fusion , 2006, Spine.
[26] Chee Kai Chua,et al. Development of a 95/5 poly(L-lactide-co-glycolide)/hydroxylapatite and beta-tricalcium phosphate scaffold as bone replacement material via selective laser sintering. , 2008, Journal of biomedical materials research. Part B, Applied biomaterials.
[27] Di Zhang,et al. Effect of cryomilling on the thermal behaviors of poly(ethylene terephthalate) , 2006 .
[28] A. Boccaccini,et al. Novel bioresorbable and bioactive composites based on bioactive glass and polylactide foams for bone tissue engineering , 2002, Journal of materials science. Materials in medicine.
[29] D. Kaplan,et al. Porosity of 3D biomaterial scaffolds and osteogenesis. , 2005, Biomaterials.
[30] Robert E Guldberg,et al. Combination of platelet-rich plasma with polycaprolactone-tricalcium phosphate scaffolds for segmental bone defect repair. , 2007, Journal of biomedical materials research. Part A.
[31] Rami Mosheiff,et al. Tissue engineering approaches for bone repair: concepts and evidence. , 2011, Injury.
[32] M J Bissell,et al. A hierarchy of ECM-mediated signalling regulates tissue-specific gene expression. , 1995, Current opinion in cell biology.
[33] J. Costerton,et al. Bacterial biofilms: a common cause of persistent infections. , 1999, Science.
[34] J. Mulliken,et al. Donor-site morbidity after harvesting rib and iliac bone. , 1984, Plastic and reconstructive surgery.
[35] P H Krebsbach,et al. Engineering craniofacial scaffolds. , 2005, Orthodontics & craniofacial research.
[36] L F Cooper,et al. Biologic determinants of bone formation for osseointegration: clues for future clinical improvements. , 1998, The Journal of prosthetic dentistry.
[37] N. Lang,et al. The biological effect of natural bone mineral on bone neoformation on the rabbit skull. , 1997, Clinical oral implants research.
[38] W. Enneking,et al. Allograft Bone Decreases in Strength In Vivo over Time , 2005, Clinical orthopaedics and related research.
[39] E. Akiba,et al. Synthesis of HCP, FCC and BCC structure alloys in the Mg–Ti binary system by means of ball milling , 2009 .
[40] G. Sándor,et al. Effect of hyperbaric oxygen on demineralized bone matrix and biphasic calcium phosphate bone substitutes. , 2010, Oral surgery, oral medicine, oral pathology, oral radiology, and endodontics.
[41] Peter X Ma,et al. Nano-fibrous scaffolding architecture selectively enhances protein adsorption contributing to cell attachment. , 2003, Journal of biomedical materials research. Part A.
[42] S. Kalia. Cryogenic Processing: A Study of Materials at Low Temperatures , 2010 .
[43] S. Teoh,et al. High tibial osteotomy using polycaprolactone-tricalcium phosphate polymer wedge in a micro pig model. , 2011, The Journal of bone and joint surgery. British volume.
[44] D H Kohn,et al. Sustained release of vascular endothelial growth factor from mineralized poly(lactide-co-glycolide) scaffolds for tissue engineering. , 2000, Biomaterials.
[45] C. Koch,et al. Addition of a Block Copolymer to Polymer Blends Produced by Cryogenic Mechanical Alloying , 2000 .
[46] M. Vallet‐Regí,et al. Tailoring vancomycin release from beta-TCP/agarose scaffolds. , 2009, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.
[47] C. V. van Blitterswijk,et al. Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique. , 2004, Biomaterials.
[48] J. Costerton,et al. Biofilms: Survival Mechanisms of Clinically Relevant Microorganisms , 2002, Clinical Microbiology Reviews.
[49] J. Vacanti,et al. Tissue engineering : Frontiers in biotechnology , 1993 .
[50] H. Ohgushi,et al. Zinc-containing tricalcium phosphate and related materials for promoting bone formation , 2005 .
[51] R. Kander,et al. Mechanical properties of a cryogenically mechanically alloyed polycarbonate–poly(aryl ether ether ketone) system , 2003 .
[52] S. Soker,et al. Osteogenic differentiation of human amniotic fluid-derived stem cells induced by bone morphogenetic protein-7 and enhanced by nanofibrous scaffolds. , 2010, Biomaterials.
[53] N. Kolthoff,et al. Effects of strontium ions on growth and dissolution of hydroxyapatite and on bone mineral detection. , 1997, Bone.
[54] T. Tateishi,et al. Stimulatory effect of zinc-releasing calcium phosphate implant on bone formation in rabbit femora. , 2000, Journal of biomedical materials research.
[55] J. Calhoun,et al. The host and the skeletal infection: classification and pathogenesis of acute bacterial bone and joint sepsis. , 1999, Bailliere's best practice & research. Clinical rheumatology.
[56] J. Planell,et al. Bone repair biomaterials , 2009 .
[57] Miqin Zhang,et al. Calcium phosphate/chitosan composite scaffolds for controlled in vitro antibiotic drug release. , 2002, Journal of biomedical materials research.
[58] Aldo R. Boccaccini,et al. Metallic ions as therapeutic agents in tissue engineering scaffolds: an overview of their biological applications and strategies for new developments , 2011, Journal of The Royal Society Interface.
[59] A. Mikos,et al. Infection and tissue engineering in segmental bone defects--a mini review. , 2011, Current opinion in biotechnology.
[60] W. Saltzman,et al. Neutrophil motility in extracellular matrix gels: mesh size and adhesion affect speed of migration. , 1997, Biophysical journal.
[61] H. Gruber,et al. Bone loss induced by dietary magnesium reduction to 10% of the nutrient requirement in rats is associated with increased release of substance P and tumor necrosis factor-alpha. , 2004, The Journal of nutrition.
[62] M. Casal,et al. Bone morphogenetic proteins in tissue engineering: the road from laboratory to clinic, part II (BMP delivery) , 2008, Journal of tissue engineering and regenerative medicine.
[63] Swee-Hin Teoh,et al. Review of vascularised bone tissue‐engineering strategies with a focus on co‐culture systems , 2015, Journal of tissue engineering and regenerative medicine.
[64] Francesca Nanni,et al. Assessment of poly(ɛ-caprolactone)/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) blends processed by solvent casting and electrospinning , 2011 .
[65] M. Zilberman,et al. Antibiotic-eluting medical devices for various applications. , 2008, Journal of controlled release : official journal of the Controlled Release Society.
[66] J. Jones,et al. Cathartic-induced magnesium toxicity during overdose management. , 1986, Annals of emergency medicine.
[67] Umber Cheema,et al. Use of multiple unconfined compression for control of collagen gel scaffold density and mechanical properties. , 2006, Soft matter.
[68] Subra Suresh,et al. Mechanical behavior of nanocrystalline metals and alloys , 2003 .
[69] Amit Bandyopadhyay,et al. Pore size and pore volume effects on alumina and TCP ceramic scaffolds , 2003 .
[70] M. Bostrom,et al. Biosynthetic bone grafting. , 1999, Clinical orthopaedics and related research.
[71] C. R. Howlett,et al. Mechanisms of magnesium-stimulated adhesion of osteoblastic cells to commonly used orthopaedic implants. , 2002, Journal of biomedical materials research.
[72] S. Teoh,et al. Superior Osteogenic Capacity for Bone Tissue Engineering of Fetal Compared with Perinatal and Adult Mesenchymal Stem Cells , 2009, Stem cells.
[73] S. Nutt,et al. Deformation behavior of bimodal nanostructured 5083 Al alloys , 2005 .
[74] K. Burg,et al. Biomaterial developments for bone tissue engineering. , 2000, Biomaterials.
[75] Jeremy Mao,et al. Bone tissue engineering and regeneration: from discovery to the clinic--an overview. , 2011, Tissue engineering. Part B, Reviews.
[76] E. Willbold,et al. Biodegradable magnesium scaffolds: Part II: peri-implant bone remodeling. , 2007, Journal of biomedical materials research. Part A.
[77] I. El-Sherbiny,et al. Novel cryomilled physically cross-linked biodegradable hydrogel microparticles as carriers for inhalation therapy , 2010, Journal of microencapsulation.
[78] Yi-Ming Sun,et al. Response of Human Mesenchymal Stem Cells (hMSCs) to the Topographic Variation of Poly(3-Hydroxybutyrate-co-3-Hydroxyhexanoate) (PHBHHx) Films , 2012, Journal of biomaterials science. Polymer edition.
[79] W C de Bruijn,et al. Late degradation tissue response to poly(L-lactide) bone plates and screws. , 1995, Biomaterials.
[80] Zhe Zhang,et al. In vitro biocompatibility study of calcium phosphate glass ceramic scaffolds with different trace element doping , 2012 .
[81] Kevin E. Healy,et al. A novel method to fabricate bioabsorbable scaffolds , 1995 .
[82] L L Hench,et al. Direct chemical bond of bioactive glass-ceramic materials to bone and muscle. , 1973, Journal of biomedical materials research.
[83] M. Huneault,et al. Preparation of interconnected poly(ε-caprolactone) porous scaffolds by a combination of polymer and salt particulate leaching , 2006 .
[84] Todd M. Lewis,et al. Ultrasound assisted twin screw extrusion of polymer–nanocomposites containing carbon nanotubes , 2009 .
[85] C. Rey,et al. Resorbable calcium phosphate bone substitute. , 1998, Journal of biomedical materials research.
[86] P. Benya,et al. Dedifferentiated chondrocytes reexpress the differentiated collagen phenotype when cultured in agarose gels , 1982, Cell.
[87] H. Aoki,et al. The mechanical properties and solubility of strontium-substituted hydroxyapatite. , 1991, Bio-medical materials and engineering.
[88] R Cancedda,et al. Repair of large bone defects with the use of autologous bone marrow stromal cells. , 2001, The New England journal of medicine.
[89] S. Teoh,et al. Contrasting effects of vasculogenic induction upon biaxial bioreactor stimulation of mesenchymal stem cells and endothelial progenitor cells cocultures in three-dimensional scaffolds under in vitro and in vivo paradigms for vascularized bone tissue engineering. , 2013, Tissue engineering. Part A.
[90] Xing‐dong Zhang,et al. A preliminary study on osteoinduction of two kinds of calcium phosphate ceramics. , 1999, Biomaterials.
[91] Paiyz E. Mikael,et al. Functionalized Carbon Nanotube Composite Scaffolds for Bone Tissue Engineering: Prospects and Progress , 2011 .
[92] A. Bandyopadhyay,et al. Influence of TiO2 and Ag2O addition on tricalcium phosphate ceramics. , 2007, Journal of biomedical materials research. Part A.
[93] W. Hutton,et al. Comparison of Healos/Bone Marrow to INFUSE(rhBMP-2/ACS) With a Collagen-Ceramic Sponge Bulking Agent as Graft Substitutes for Lumbar Spine Fusion , 2005, Spine.
[94] D. Hutmacher,et al. Scaffolds in tissue engineering bone and cartilage. , 2000, Biomaterials.
[95] D. Barrio,et al. Vanadium and bone development: putative signaling pathways. , 2006, Canadian journal of physiology and pharmacology.
[96] E. Lavernia,et al. Synthesis and mechanical behavior of nanostructured materials via cryomilling , 2006 .
[97] S. Teoh. Engineering Materials For Biomedical Applications , 2004 .
[98] P. Lipsitz. The clinical and biochemical effects of excess magnesium in the newborn. , 1971, Pediatrics.
[99] N. Kawazoe,et al. Biomaterials and Mechanical Stimulation in Tissue Engineering , 2008 .
[100] Colleen L Flanagan,et al. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. , 2005, Biomaterials.
[101] Alexis M Pietak,et al. Magnesium and its alloys as orthopedic biomaterials: a review. , 2006, Biomaterials.
[102] Yuanwei Chen,et al. Effect of strontium ions on the growth of ROS17/2.8 cells on porous calcium polyphosphate scaffolds. , 2006, Biomaterials.
[103] L. Gineste,et al. Degradation of hydroxylapatite, fluorapatite, and fluorhydroxyapatite coatings of dental implants in dogs. , 1999, Journal of biomedical materials research.
[104] M. Okazaki,et al. Synthesis of functionally graded MgCO3 apatite accelerating osteoblast adhesion. , 2002, Journal of biomedical materials research.
[105] C J Goodacre,et al. Clinical complications of osseointegrated implants. , 1999, The Journal of prosthetic dentistry.
[106] Richard O C Oreffo,et al. Bone tissue engineering: hope vs hype. , 2002, Biochemical and biophysical research communications.
[107] Swee Hin Teoh,et al. Polycaprolactone-20% tricalcium phosphate scaffolds in combination with platelet-rich plasma for the treatment of critical-sized defects of the mandible: a pilot study. , 2007, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.
[108] J O Hollinger,et al. Biodegradable bone repair materials. Synthetic polymers and ceramics. , 1986, Clinical orthopaedics and related research.
[109] Jui-Hsiang Chen,et al. Fabrication of porous biodegradable polymer scaffolds using a solvent merging/particulate leaching method. , 2002, Journal of biomedical materials research.
[110] C. Koch,et al. Anomalous Phase Inversion in Polymer Blends Prepared by Cryogenic Mechanical Alloying , 2001 .
[111] Jonathan C Knowles,et al. Development of hydroxyapatite bone scaffold for controlled drug release via poly(epsilon-caprolactone) and hydroxyapatite hybrid coatings. , 2004, Journal of biomedical materials research. Part B, Applied biomaterials.
[112] J. Weertman,et al. Cyclic softening of ultrafine grain copper , 1998 .
[113] C. Prodan,et al. CNS demyelination from zinc toxicity? , 2000, Neurology.
[114] Amit Bandyopadhyay,et al. Effects of silica and zinc oxide doping on mechanical and biological properties of 3D printed tricalcium phosphate tissue engineering scaffolds. , 2012, Dental materials : official publication of the Academy of Dental Materials.
[115] K. Leong,et al. Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends. , 2003, Biomaterials.
[116] K E Healy,et al. Engineering bone regeneration with bioabsorbable scaffolds with novel microarchitecture. , 1999, Tissue engineering.
[117] S. Teoh,et al. In vitro degradation of novel bioactive polycaprolactone—20% tricalcium phosphate composite scaffolds for bone engineering , 2007 .
[118] I. Zein,et al. Fused deposition modeling of novel scaffold architectures for tissue engineering applications. , 2002, Biomaterials.
[119] D W Hutmacher,et al. The effect of rhBMP-2 on canine osteoblasts seeded onto 3D bioactive polycaprolactone scaffolds. , 2004, Biomaterials.
[120] Z Y Zhang,et al. Lateral ridge augmentation using a PCL-TCP scaffold in a clinically relevant but challenging micropig model. , 2012, Clinical oral implants research.
[121] I. Marzi,et al. Endothelial progenitor cells and mesenchymal stem cells seeded onto beta-TCP granules enhance early vascularization and bone healing in a critical-sized bone defect in rats. , 2010, Tissue engineering. Part A.
[122] G S Beaupré,et al. Mechanobiology of initial pseudarthrosis formation with oblique fractures , 2001, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[123] S M Perren,et al. Role of interfragmentary strain in fracture healing: Ovine model of a healing osteotomy , 1991, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[124] H. Hansson,et al. Osseointegrated titanium implants. Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man. , 1981, Acta orthopaedica Scandinavica.
[125] S. Maeda,et al. Osteoblast differentiation and bone formation gene expression in strontium-inducing bone marrow mesenchymal stem cell. , 2007, The Kobe journal of medical sciences.
[126] Di Zhang,et al. Thermal behaviors of poly(ethylene terephthalate)/SiO2 nanocomposites prepared by cryomilling , 2006 .
[127] T. Tateishi,et al. Preparation, solubility, and cytocompatibility of zinc-releasing calcium phosphate ceramics. , 2000, Journal of biomedical materials research.
[128] C J Damien,et al. Bone graft and bone graft substitutes: a review of current technology and applications. , 1991, Journal of applied biomaterials : an official journal of the Society for Biomaterials.
[129] J A Planell,et al. Fabrication of low temperature macroporous hydroxyapatite scaffolds by foaming and hydrolysis of an alpha-TCP paste. , 2004, Biomaterials.
[130] Duncan Dowson,et al. A comparative study of the performance of metallic and ceramic femoral head components in total replacement hip joints , 1995 .
[131] P. Kasten,et al. Evaluation of Mineralized Collagen and α-Tricalcium Phosphate as Scaffolds for Tissue Engineering of Bone Using Human Mesenchymal Stem Cells , 2004, Cells Tissues Organs.
[132] D W Hutmacher,et al. Flow modelling within a scaffold under the influence of uni-axial and bi-axial bioreactor rotation. , 2005, Journal of biotechnology.
[133] A. Boccaccini,et al. Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering. , 2006, Biomaterials.
[134] C. M. Agrawal,et al. Technique to control pH in vicinity of biodegrading PLA-PGA implants. , 1997, Journal of biomedical materials research.
[135] Di Zhang,et al. Structural changes in poly(ethylene terephthalate) induced by cryomilling and ambimilling , 2006 .
[136] A. Bandyopadhyay,et al. CaO--P2O5--Na2O-based sintering additives for hydroxyapatite (HAp) ceramics. , 2004, Biomaterials.
[137] Li Li,et al. A review on biodegradable polymeric materials for bone tissue engineering applications , 2009 .
[138] P. Soucacos,et al. Vascularised bone grafts for the management of non-union. , 2006, Injury.
[139] D. Barrio,et al. Osteogenic activity of vanadyl(IV)-ascorbate complex: evaluation of its mechanism of action. , 2006, The international journal of biochemistry & cell biology.
[140] Robert Langer,et al. Advances in tissue engineering. , 2004, Current topics in developmental biology.
[141] A. P. Smith,et al. High-energy mechanical milling of poly(methyl methacrylate), polyisoprene and poly(ethylene-alt-propylene) , 2000 .
[142] Mahesh Choolani,et al. Neo-vascularization and bone formation mediated by fetal mesenchymal stem cell tissue-engineered bone grafts in critical-size femoral defects. , 2010, Biomaterials.
[143] Cato T Laurencin,et al. Polyphosphazene/nano-hydroxyapatite composite microsphere scaffolds for bone tissue engineering. , 2008, Biomacromolecules.
[144] Koichiro Ihara,et al. Recalcitrant posttraumatic nonunion of the humerus: 23 patients reconstructed with vascularized bone graft: 23 patients reconstructed with vascularized bone graft , 2003, Acta orthopaedica Scandinavica.
[145] K. Cleveland. Delayed Union and Nonunion of Fractures , 2008 .
[146] Linda G Griffith,et al. Engineering principles of clinical cell-based tissue engineering. , 2004, The Journal of bone and joint surgery. American volume.
[147] P. Layrolle,et al. Osteoblastic cell behavior on nanostructured metal implants. , 2008, Nanomedicine.
[148] David J Mooney,et al. VEGF Scaffolds Enhance Angiogenesis and Bone Regeneration in Irradiated Osseous Defects , 2006, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.
[149] N. Gjerdet,et al. Effects of instability on fracture healing in the rat. , 1984, Acta orthopaedica Scandinavica.
[150] Mark A. Lee,et al. Nonunions and the potential of stem cells in fracture-healing. , 2008, The Journal of bone and joint surgery. American volume.
[151] C. Koch,et al. Solid-State Blending of Polymers by Cryogenic Mechanical Alloying , 2000 .
[152] T. Webster,et al. Hydroxylapatite with substituted magnesium, zinc, cadmium, and yttrium. I. Structure and microstructure. , 2002, Journal of biomedical materials research.
[153] D. Hungerford,et al. Human osteoblast-like cells (MG63) proliferate on a bioactive glass surface. , 1997, Journal of biomedical materials research.
[154] Polyaniline/iron nanocomposites prepared by cryomilling , 2006 .
[155] E. D. Rekow,et al. Engineered cellular response to scaffold architecture in a rabbit trephine defect. , 2003, Journal of biomedical materials research. Part A.
[156] Wei Sun,et al. Fabrication of three-dimensional polycaprolactone/hydroxyapatite tissue scaffolds and osteoblast-scaffold interactions in vitro. , 2007, Biomaterials.
[157] Dietmar W. Hutmacher,et al. Biodegradable polymers applied in tissue engineering research: a review , 2007 .
[158] I. Rivero,et al. Fabrication and characterization of interconnected porous biodegradable poly(ε-caprolactone) load bearing scaffolds , 2011, Journal of materials science. Materials in medicine.
[159] Aldo R Boccaccini,et al. Bone tissue engineering therapeutics: controlled drug delivery in three-dimensional scaffolds , 2010, Journal of The Royal Society Interface.
[160] C. Koch,et al. Structural changes in poly(ethylene terephthalate) induced by mechanical milling , 2000 .
[161] Cato T. Laurencin,et al. Nanostructured Scaffolds for Bone Tissue Engineering , 2011 .
[162] T. Taylor,et al. Use of bovine osteogenic protein to promote rapid osseointegration of endosseous dental implants. , 1992, The International journal of oral & maxillofacial implants.
[163] R. Sinisterra,et al. Bioactive glass as a drug delivery system of tetracycline and tetracycline associated with beta-cyclodextrin. , 2004, Biomaterials.
[164] Maurilio Marcacci,et al. Stem cells associated with macroporous bioceramics for long bone repair: 6- to 7-year outcome of a pilot clinical study. , 2007, Tissue engineering.
[165] Di Zhang,et al. ABS/iron nanocomposites prepared by cryomilling , 2006 .
[166] Roger D Kamm,et al. Vasculogenic and Osteogenesis‐Enhancing Potential of Human Umbilical Cord Blood Endothelial Colony‐Forming Cells , 2012, Stem cells.
[167] A. Isayev,et al. Self‐Reinforced melt processible polymer composites: Extrusion, compression, and injection molding , 1987 .
[168] Guoqiang Chen,et al. Synthesis, Characterization and Cell Compatibility of Novel Poly(ester urethane)s Based on Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) and Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) Prepared by Melting Polymerization , 2009, Journal of biomaterials science. Polymer edition.
[169] H B Skinner,et al. Ceramic bearing surfaces. , 1999, Clinical orthopaedics and related research.
[170] S. Milz,et al. Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing , 2005, Journal of materials science. Materials in medicine.
[171] R. Birringer,et al. Kinematics of polycrystal deformation by grain boundary sliding , 2011 .
[172] W. Bonfield,et al. A comparative study on the in vivo behavior of hydroxyapatite and silicon substituted hydroxyapatite granules , 2002, Journal of materials science. Materials in medicine.
[173] Guoqiang Chen,et al. Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) as an injectable implant system for prevention of post-surgical tissue adhesion. , 2009, Biomaterials.
[174] S. Teoh,et al. Surface modification of PCL-TCP scaffolds in rabbit calvaria defects: Evaluation of scaffold degradation profile, biomechanical properties and bone healing patterns. , 2009, Journal of biomedical materials research. Part A.
[175] H. Fischer,et al. Scaffolds for bone healing: concepts, materials and evidence. , 2011, Injury.
[176] S. Teoh,et al. Surface modification of PCL-TCP scaffolds improve interfacial mechanical interlock and enhance early bone formation: an in vitro and in vivo characterization. , 2010, Journal of biomedical materials research. Part A.
[177] Di Zhang,et al. PET/SiO2 nanocomposites prepared by cryomilling , 2006 .
[178] A. Mølster. Effects of rotational instability on healing of femoral osteotomies in the rat. , 1984, Acta orthopaedica Scandinavica.
[179] P. Layrolle,et al. Surface treatments of titanium dental implants for rapid osseointegration. , 2007, Dental materials : official publication of the Academy of Dental Materials.
[180] A. Vaccaro,et al. Clinical applications of BMP-7/OP-1 in fractures, nonunions and spinal fusion , 2007, International Orthopaedics.
[181] H. Nygren,et al. Implantation of hydrophilic and hydrophobic titanium discs in rat tibia: cellular reactions on the surfaces during the first 3 weeks in bone. , 2004, Biomaterials.
[182] Ximei Wu,et al. Zinc-induced sodium-dependent vitamin C transporter 2 expression: potent roles in osteoblast differentiation. , 2003, Archives of biochemistry and biophysics.
[183] D. Barrio,et al. Vanadyl(IV) complexes with saccharides. Bioactivity in osteoblast-like cells in culture. , 2006, Canadian journal of physiology and pharmacology.
[184] Swee Hin Teoh,et al. Evaluation of polycaprolactone scaffold degradation for 6 months in vitro and in vivo. , 2009, Journal of biomedical materials research. Part A.
[185] T. Webster,et al. Hydroxylapatite with substituted magnesium, zinc, cadmium, and yttrium. II. Mechanisms of osteoblast adhesion. , 2002, Journal of biomedical materials research.
[186] A. Clark,et al. The influence of surface chemistry on implant interface histology: a theoretical basis for implant materials selection. , 1976, Journal of biomedical materials research.
[187] C. Koch,et al. Temperature-induced morphological evolution in polymer blends produced by cryogenic mechanical alloying , 2000 .
[188] Wei Song,et al. In vivo study of porous strontium-doped calcium polyphosphate scaffolds for bone substitute applications , 2009, Journal of materials science. Materials in medicine.
[189] Michael J Yaszemski,et al. Effect of local sequential VEGF and BMP-2 delivery on ectopic and orthotopic bone regeneration. , 2009, Biomaterials.
[190] P. Layrolle,et al. Histomorphometric analysis of the osseointegration of four different implant surfaces in the femoral epiphyses of rabbits. , 2008, Clinical oral implants research.
[191] William D. Callister,et al. Materials Science and Engineering: An Introduction , 1985 .
[192] I Zein,et al. Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. , 2001, Journal of biomedical materials research.
[193] Federica Chiellini,et al. Polymeric Materials for Bone and Cartilage Repair , 2010 .
[194] S. Tatehara,et al. The in vitro antibiotic release from anti-washout apatite cement using chitosan , 2002, Journal of materials science. Materials in medicine.
[195] Yasuhiko Tabata,et al. Effect of the fiber diameter and porosity of non-woven PET fabrics on the osteogenic differentiation of mesenchymal stem cells , 2004, Journal of biomaterials science. Polymer edition.
[196] Filippo Causa,et al. Bioactive scaffolds for bone and ligament tissue , 2007, Expert review of medical devices.
[197] Joseph Jagur-Grodzinski,et al. Polymers for tissue engineering, medical devices, and regenerative medicine. Concise general review of recent studies , 2006 .
[198] Peter X Ma,et al. Nano-fibrous scaffolding promotes osteoblast differentiation and biomineralization. , 2007, Biomaterials.
[199] G. Willmann,et al. Ceramic Femoral Head Retrieval Data , 2000, Clinical orthopaedics and related research.