Numerical Simulation of Moisture Diffusion in the Microstructure of Asphalt Mixtures

Laboratory tests were carried out in accordance with ASTM C664-10(2020) to measure diffusion parameters in an asphalt mixture. These diffusion parameters are effective measures for use in asphalt mixtures. However, the tests could not provide detailed images of the water vapour distribution in the asphalt mixture. To solve this problem, this study provides a method for establishing a numerical model of moisture diffusion in an asphalt mixture, and gives a more detailed picture of the water vapour movement inside the asphalt mixture. Through numerical simulation results obtained under different external conditions, it was demonstrated that water molecules were mainly concentrated in medium III after 100 days of diffusion. After 1000 days of diffusion, the water molecules gradually penetrated the asphalt film in the aggregate particles. Additionally, the water vapour concentrations in the asphalt mixture varied significantly from spot to spot, and various concentration gradients were formed at different locations. These findings revealed that water vapour concentrations in an asphalt mixture vary significantly from spot to spot, forming various concentration gradients at different locations. These findings will be helpful in revealing the mechanism of water damage caused by moisture in asphalt mixtures.

[1]  Rong Luo,et al.  Effect of water vapor concentration on adhesion between asphalt and aggregate , 2022, Materials and Structures.

[2]  A. Varveri,et al.  Do chemistry and rheology follow the same laboratory ageing trends in bitumen? , 2022, Materials and Structures.

[3]  Rong Luo,et al.  Evaluating the influence of humidity on asphalt mixture performance by the flow number test , 2021 .

[4]  Rong Luo,et al.  Development of time-temperature-humidity superposition principle for asphalt mixtures , 2021, Mechanics of Materials.

[5]  Rong Luo,et al.  Actual diffusivities and diffusion paths of water vapor in asphalt mixtures , 2019, Construction and Building Materials.

[6]  Rong Luo,et al.  Investigation of effect of temperature on water vapor diffusing into asphalt mixtures , 2018, Construction and Building Materials.

[7]  Rong Luo,et al.  Water vapor passing through asphalt mixtures under different relative humidity differentials , 2018 .

[8]  Eduardo J. Rueda,et al.  Mechanical response of asphalt mixtures under partial saturation conditions , 2018 .

[9]  Bernardo Caicedo,et al.  Influence of relative humidity and saturation degree in the mechanical properties of Hot Mix Asphalt (HMA) materials , 2017 .

[10]  Masoud K. Darabi,et al.  A Computational-Experimental Method to Determine the Effective Diffusivity of Asphalt Concrete , 2017 .

[11]  Mohammad I. Hossain,et al.  Characterisation and modelling of vapour-conditioned asphalt binders using nanoindentation , 2015 .

[12]  F. Reyes,et al.  ASPHALT MIXTURE DIGITAL RECONSTRUCTION BASED ON CT IMAGES RECONSTRUCCIÓN DIGITAL , 2015 .

[13]  Robert L. Lytton,et al.  Modeling Water Vapor Diffusion in Pavement and Its Influence on Fatigue Crack Growth of Fine Aggregate Mixture , 2013 .

[14]  J. Arnold,et al.  An assessment of methods to determine the directional moisture diffusion coefficients of composite materials , 2013 .

[15]  M. Kutay,et al.  Comparison of 2D and 3D image-based aggregate morphological indices , 2011 .

[16]  Mauricio Sánchez-Silva,et al.  Stochastic micromechanical model of the deterioration of asphalt mixtures subject to moisture diffusion processes , 2011 .

[17]  D. Little,et al.  Experimental Measurement of Water Diffusion through Fine Aggregate Mixtures , 2011 .

[18]  D. Little,et al.  History dependence of water diffusion in asphalt binders , 2011 .

[19]  E. Garboczi,et al.  Numerical analysis of moisture vapor diffusion in asphalt mixtures using digital images , 2010 .

[20]  Dallas N. Little,et al.  Micromechanical modeling of the influence of material properties on moisture-induced damage in asphalt mixtures , 2010 .

[21]  Eyad Masad,et al.  Experimental Measurement and Numerical Simulation of Water Vapor Diffusion through Asphalt Pavement Materials , 2010 .

[22]  D. Little,et al.  Measurement of Water Diffusion in Asphalt Binders Using Fourier Transform Infrared–Attenuated Total Reflectance , 2010 .

[23]  Robert L. Lytton,et al.  Measurements of the moisture diffusion coefficient of asphalt mixtures and its relationship to mixture composition , 2009 .

[24]  H. K. Navaz,et al.  Experimental Measurements of Diffusivity of Vapors through Porous Substrates , 2007 .

[25]  Ala R. Abbas,et al.  Nondestructive measurements of moisture transport in asphalt mixtures , 2007 .

[26]  U. Bagampadde,et al.  Laboratory studies on stripping at bitumen/substrate interfaces using FTIR-ATR , 2007 .

[27]  E. Masad,et al.  Measurements of Moisture Suction and Diffusion Coefficient in Hot-Mix Asphalt and Their Relationships to Moisture Damage , 2006 .

[28]  Boris Radovskiy,et al.  Analytical Formulas for Film Thickness in Compacted Asphalt Mixture , 2003 .

[29]  D. Bentz,et al.  DEVELOPMENT OF A TECHNIQUE FOR IN SITU MEASUREMENT OF WATER AT THE ASPHALT/MODEL SILICEOUS AGGREGATE INTERFACE , 1992 .

[30]  S. Torquato,et al.  Nearest-surface distribution functions for polydispersed particle systems. , 1992, Physical review. A, Atomic, molecular, and optical physics.