Enhanced mechanical properties of Si3N4 ceramics with ZrB2-B binary additives prepared at low temperature

[1]  Chengyong Wang,et al.  Fabrication and wear behaviors of graded Si3N4 ceramics by the combination of two-step sintering and β-Si3N4 seeds , 2018, Journal of the European Ceramic Society.

[2]  Chengyong Wang,et al.  Effect of ZrB2 content on phase assemblage and mechanical properties of Si3 N4 -ZrB2 ceramics prepared at low temperature , 2018, Journal of the American Ceramic Society.

[3]  Weiming Guo,et al.  Si3N4-ZrB2 ceramics prepared at low temperature with improved mechanical properties , 2017 .

[4]  Weiming Guo,et al.  High-toughness Lu2O3-doped Si3N4 ceramics by seeding , 2016 .

[5]  Guo‐Jun Zhang,et al.  New Borothermal Reduction Route to Synthesize Submicrometric ZrB2 Powders with Low Oxygen Content , 2011 .

[6]  P. Šajgalík,et al.  Influence of various rare-earth oxide additives on microstructure and mechanical properties of silicon nitride based nanocomposites , 2010 .

[7]  B. Matović,et al.  Mechanical properties of silicon nitride-based ceramics and its use in structural applications at high temperatures , 2010 .

[8]  J. Kuebler,et al.  The influence of the grain boundary phase on the mechanical properties of Si3N4–MoSi2 composites , 2007 .

[9]  S. Hampshire.  Silicon nitride ceramics - review of structure, processing and properties , 2007 .

[10]  T. Nishimura,et al.  New strategies for preparing nanosized silicon nitride ceramics , 2005 .

[11]  F. Riley.  Silicon Nitride and Related Materials , 2004 .

[12]  K. Hirao,et al.  Influence of Rare-Earth Additives on Wear Properties of Hot-Pressed Silicon Nitride Ceramics under Dry Sliding Conditions , 2004 .

[13]  N. Murayama,et al.  Pulsed Electric Current Sintering of Silicon Nitride , 2003 .

[14]  Ya-li Li,et al.  Sintering of nanopowders of amorphous silicon nitride under ultrahigh pressure , 2000 .

[15]  S. Risbud,et al.  Rapid consolidation processing of silicon nitride powders , 1996 .

[16]  M. Mitomo,et al.  Microstructural Development During Gas‐Pressure Sintering of α‐Silicon Nitride , 1992 .

[17]  I. Tanaka,et al.  Hot Isostatic Press Sintering and Properties of Silicon Nitride without Additives , 1989 .

[18]  Ji Yeon Park,et al.  The α- to β-Si3N4 transformation in the presence of liquid silicon , 1988 .

[19]  J. Heinrich,et al.  Relationships between processing, microstructure and properties of dense and reaction-bonded silicon nitride , 1987 .

[20]  C. Greskovich,et al.  Hardness of dense α- and β-Si3N4 ceramics , 1985 .

[21]  R. J. Lumby,et al.  Nitrogen Ceramics: Liquid Phase Sintering , 1983 .

[22]  F. F. Lange.  Fracture Toughness of Si3N4 as a Function of the Initial α‐Phase Content , 1979 .

[23]  F. Lange.  Relation Between Strength, Fracture Energy, and Microstructure of Hot-Pressed Si3N4 , 1973 .