Electrocatalytic activity of Pd-Co bimetallic mixtures for formic acid oxidation studied by scanning electrochemical microscopy.

The electrochemical oxidation of formic acid was studied by the tip generation-substrate collection (TG-SC) mode of scanning electrochemical microscopy (SECM), extending the number of applications of SECM in electrocatalysis. Formic acid was generated at a Hg on Au ultramicroelectrode (UME) tip by reduction of CO(2) in a 0.1 M KHCO(3) solution saturated with this gas. The electrocatalytic activity of different Pd-Co bimetallic compositions was evaluated using a Pd-Co electrocatalyst array formed by spots deposited onto glassy carbon (GC) as a SECM substrate. The SECM tip, which generated a constant formic acid flux, was scanned above the array and the oxidation current generated when formic acid was collected by active electrocatalytic spots was displayed as a function of tip position. This generated a SECM image that showed the electrocatalytic activity of each spot. SECM screening identified Pd(50)Co(50) (Pd/Co = 50:50, atomic ratio) as a better electrocatalyst toward the formic acid oxidation than pure Pd or Pt in 0.1 M KHCO(3) solution and this result was confirmed by cyclic voltammetry. Positive feedback was observed for the most active compositions of Pd-Co which suggests fast reaction kinetics and chemical reversibility during the oxidation of formic acid to CO(2). Moreover this feedback increases the contrast between active and non-active spots in this imaging mode.

[1]  A. Bard,et al.  Interrogation of surfaces for the quantification of adsorbed species on electrodes: oxygen on gold and platinum in neutral media. , 2008, Journal of the American Chemical Society.

[2]  Yongyao Xia,et al.  Electrocatalytic performance of PdCo–C catalyst for formic acid oxidation , 2008 .

[3]  A. Bard,et al.  Methanol Tolerance of Pd-Co Oxygen Reduction Reaction Electrocatalysts Using Scanning Electrochemical Microscopy , 2008 .

[4]  Xingwen Yu,et al.  Recent advances in direct formic acid fuel cells (DFAFC) , 2008 .

[5]  A. Bard,et al.  Screening of oxygen evolution electrocatalysts by scanning electrochemical microscopy using a shielded tip approach. , 2008, Analytical chemistry.

[6]  S. Liao,et al.  High performance Pd-based catalysts for oxidation of formic acid , 2008 .

[7]  A. Bard,et al.  Scanning electrochemical microscopy. 60. Quantitative calibration of the SECM substrate generation/tip collection mode and its use for the study of the oxygen reduction mechanism. , 2008, Analytical chemistry.

[8]  L. Hong,et al.  Nanostructured Pt/C and Pd/C catalysts for direct formic acid fuel cells , 2006 .

[9]  R. Behm,et al.  Bridge-bonded formate: active intermediate or spectator species in formic acid oxidation on a Pt film electrode? , 2006, Langmuir : the ACS journal of surfaces and colloids.

[10]  G. Samjeské,et al.  Mechanistic study of electrocatalytic oxidation of formic acid at platinum in acidic solution by time-resolved surface-enhanced infrared absorption spectroscopy. , 2006, The journal of physical chemistry. B.

[11]  R. Masel,et al.  Unexpected Activity of Palladium on Vanadia Catalysts for Formic Acid Electro-oxidation , 2005 .

[12]  José L. Fernández,et al.  Scanning Electrochemical Microscopy #54. Application To The Study Of Heterogeneous Catalytic ReactionsHydrogen Peroxide Decomposition , 2005 .

[13]  José L. Fernández,et al.  Thermodynamic guidelines for the design of bimetallic catalysts for oxygen electroreduction and rapid screening by scanning electrochemical microscopy. M-co (M: Pd, Ag, Au). , 2005, Journal of the American Chemical Society.

[14]  S. Ha,et al.  Direct Formic Acid Fuel Cells with 600 mA cm–2 at 0.4 V and 22 °C , 2004 .

[15]  Emily A Hueske,et al.  Scanning electrochemical microscopy. 48. Hg/Pt hemispherical ultramicroelectrodes: fabrication and characterization. , 2003, Analytical chemistry.

[16]  S. Ha,et al.  Catalysts for direct formic acid fuel cells , 2003 .

[17]  A. Wiȩckowski,et al.  Nanostructured electrode surfaces studied by electrochemical NMR , 2002 .

[18]  P. Ross,et al.  Surface science studies of model fuel cell electrocatalysts , 2002 .

[19]  A. Aldaz,et al.  Electrochemical approaches to alleviation of the problem of carbon dioxide accumulation , 2001 .

[20]  T. Iwasita,et al.  Methanol oxidation on PtRu electrodes. Influence of surface structure and Pt-Ru atom distribution , 2000 .

[21]  A. Wiȩckowski,et al.  Formic Acid Decomposition on Polycrystalline Platinum and Palladized Platinum Electrodes , 1999 .

[22]  V. Climent,et al.  Electrocatalysis of formic acid and CO oxidation on antimony-modified Pt(111) electrodes , 1998 .

[23]  Yu Morimoto,et al.  Comparison of methanol oxidations on Pt, Pt|Ru and Pt|Sn electrodes , 1998 .

[24]  D. Lowy,et al.  Electrochemical reduction of carbon dioxide on flat metallic cathodes , 1997 .

[25]  D. Kolb,et al.  Formic Acid Oxidation on Ultrathin Pd Films on Au(hkl) and Pt(hkl) Electrodes , 1996 .

[26]  C. Lamy,et al.  Electro-oxidation of C1 molecules at Pt-based catalysts highly dispersed into a polymer matrix: effect of the method of preparation , 1996 .

[27]  T. Iwasita,et al.  On the study of adsorbed species at platinum from methanol, formic acid and reduced carbon dioxide via in situ FT-ir spectroscopy , 1992 .

[28]  Masahiro Hiramoto,et al.  Electrochemical Reduction of Carbon Dioxide on Various Metal Electrodes in Low‐Temperature Aqueous KHCO 3 Media , 1990 .

[29]  H. Gasteiger,et al.  Electro-oxidation mechanisms of methanol and formic acid on Pt-Ru alloy surfaces , 1995 .