Improving pore filling of gel electrolyte and charge transport in photoanode for high-efficiency quasi-solid-state dye-sensitized solar cells.

We demonstrate the enhancement of pore-filling and wettability of gel electrolyte in quasi-solid-state dye-sensitized solar cells (DSSCs) by developing a kinetically driven electrolyte infiltration approach, in which the air purging provides the driving force. This method renders fast electrolyte diffusion throughout the three-dimensional TiO2 nanoparticle network, promising for large-area device fabrication. In addition, for the first time we incorporate multiwalled carbon nanotubes into the anode of quasi-solid-state DSSCs to improve the charge transfer efficiency and fill factor. These advancements finally generate an efficiency exceeding 7.0%, much higher than the device efficiency of 5.5% fabricated by the conventional method.

[1]  Juan Bisquert,et al.  Determination of the electron lifetime in nanocrystalline dye solar cells by open-circuit voltage decay measurements. , 2003, Chemphyschem : a European journal of chemical physics and physical chemistry.

[2]  B. Scrosati,et al.  Nanocomposite polymer electrolytes for lithium batteries , 1998, Nature.

[3]  Michael Grätzel,et al.  Recent advances in sensitized mesoscopic solar cells. , 2009, Accounts of chemical research.

[4]  Peng Wang,et al.  A stable quasi-solid-state dye-sensitized solar cell with an amphiphilic ruthenium sensitizer and polymer gel electrolyte , 2003, Nature materials.

[5]  Gamolwan Tumcharern,et al.  Dye-sensitized solar cells based on TiO2–MWCNTs composite electrodes: Performance improvement and their mechanisms , 2009 .

[6]  Xin Wang,et al.  Electrochemical Impedance Studies of Methanol Electro-oxidation on Pt/C Thin Film Electrode , 2002 .

[7]  T. Kitamura,et al.  Quasi-Solid-State Dye-Sensitized TiO2 Solar Cells: Effective Charge Transport in Mesoporous Space Filled with Gel Electrolytes Containing Iodide and Iodine , 2001 .

[8]  Jin Zhai,et al.  Two-dimensional graphene bridges enhanced photoinduced charge transport in dye-sensitized solar cells. , 2010, ACS nano.

[9]  Xin Wang,et al.  Multifunctional composite membrane based on a highly porous polyimide matrix for direct methanol fuel cells , 2010 .

[10]  Michael Grätzel,et al.  Porphyrin-Sensitized Solar Cells with Cobalt (II/III)–Based Redox Electrolyte Exceed 12 Percent Efficiency , 2011, Science.

[11]  Guido Viscardi,et al.  Combined experimental and DFT-TDDFT computational study of photoelectrochemical cell ruthenium sensitizers. , 2005, Journal of the American Chemical Society.

[12]  Helena Ribeiro,et al.  Dye-sensitized solar cells: A safe bet for the future. , 2008 .

[13]  Y. Kwon,et al.  Exploring the heterogeneous interfaces in organic or ruthenium dye-sensitized liquid- and solid-state solar cells. , 2012, ACS applied materials & interfaces.

[14]  Peter Lund,et al.  Review of stability for advanced dye solar cells , 2010 .

[15]  Takayuki Kitamura,et al.  Quasi-solid-state dye-sensitized solar cells using room temperature molten salts and a low molecular weight gelator. , 2002, Chemical communications.

[16]  Peng Wang,et al.  Gelation of ionic liquid-based electrolytes with silica nanoparticles for quasi-solid-state dye-sensitized solar cells. , 2003, Journal of the American Chemical Society.

[17]  T. Ma,et al.  Ultrarapid Sonochemical Synthesis of ZnO Hierarchical Structures: From Fundamental Research to High Efficiencies up to 6.42% for Quasi-Solid Dye-Sensitized Solar Cells , 2013 .

[18]  Thomas W. Hamann,et al.  Dye-sensitized solar cell redox shuttles , 2011 .

[19]  H. Matsui,et al.  Improved dye-sensitized solar cells using ionic nanocomposite gel electrolytes , 2004 .

[20]  W. W. Leung,et al.  Electrospun TiO2 Nanorods with Carbon Nanotubes for Efficient Electron Collection in Dye‐Sensitized Solar Cells , 2013, Advanced materials.

[21]  P. Liska,et al.  Fabrication of thin film dye sensitized solar cells with solar to electric power conversion efficiency over 10 , 2008 .

[22]  Juan Bisquert,et al.  Determination of rate constants for charge transfer and the distribution of semiconductor and electrolyte electronic energy levels in dye-sensitized solar cells by open-circuit photovoltage decay method. , 2004, Journal of the American Chemical Society.

[23]  S. Ogale,et al.  Enhanced conversion efficiency in dye-sensitized solar cells based on hydrothermally synthesized TiO2-MWCNT nanocomposites. , 2009, ACS applied materials & interfaces.

[24]  Eric Wei-Guang Diau,et al.  Porphyrin-sensitized solar cells. , 2013, Chemical Society reviews.

[25]  T. Ma,et al.  Solid‐State Synthesis of ZnO Nanostructures for Quasi‐Solid Dye‐Sensitized Solar Cells with High Efficiencies up to 6.46% , 2013, Advanced materials.

[26]  Alex B. F. Martinson,et al.  Advancing beyond current generation dye-sensitized solar cells , 2008 .

[27]  Zhipeng Huo,et al.  Low molecular mass organogelator based gel electrolyte gelated by a quaternary ammonium halide salt for quasi-solid-state dye-sensitized solar cells , 2010 .