Effective transport properties of the porous electrodes in solid oxide fuel cells

This article presents a numerical framework for the computation of the effective transport properties of solid oxide fuel cells (SOFCs) porous electrodes from three-dimensional (3D) constructions of the microstructure. Realistic models of the 3D microstructure of porous electrodes are first constructed from measured parameters such as porosity and particle size distribution. Then each phase in the model geometries is tessellated with a computational grid. Three different types of grids are considered: Cartesian, octree, and body-fitted/cut-cell with successive levels of surface refinement. Finally, a finite volume method is used to compute the effective transport properties in the three phases (pore, electron, and ion) of the electrode. To validate the numerical approach, results obtained with the finite volume method are compared to those calculated with a random walk simulation for the case of a body-centred cubic lattice of spheres. Then, the influence of the sample size is investigated for random geometries with monosized particle distributions. Finally, effective transport properties are calculated for model geometries with polydisperse particle size distributions similar to those observed in actual SOFC electrodes.

[1]  V. Burganos.  Monte Carlo simulation of gas diffusion in regular and randomized pore systems , 1993 .

[2]  Andrea Lanzini,et al.  Microstructural characterization of solid oxide fuel cell electrodes by image analysis technique , 2009 .

[3]  Khiam Aik Khor,et al.  Simulation of a composite cathode in solid oxide fuel cells , 2004 .

[4]  Svein Sunde,et al.  Monte Carlo Simulations of Conductivity of Composite Electrodes for Solid Oxide Fuel Cells , 1996 .

[5]  Alex C. Hoffmann,et al.  Numerical analysis of a planar anode-supported SOFC with composite electrodes , 2009 .

[6]  Wilson K. S. Chiu,et al.  Lattice Boltzmann modeling of 2D gas transport in a solid oxide fuel cell anode , 2007 .

[7]  F. Lange,et al.  Relation between percolation and particle coordination in binary powder mixtures , 1991 .

[8]  Yann Bultel,et al.  Discrete modelling of the electrochemical performance of SOFC electrodes , 2006 .

[9]  Rohallah Tavakoli,et al.  CartGen: Robust, efficient and easy to implement uniform/octree/embedded boundary Cartesian grid generator , 2008 .

[10]  E. Wachsman,et al.  Three-Dimensional Reconstruction of Porous LSCF Cathodes , 2007 .

[11]  D. Jeon.  A comprehensive CFD model of anode-supported solid oxide fuel cells , 2009 .

[12]  D. Dees,et al.  The Conductivity of Porous Ni/ZrO2-Y2O3 Cermets , 1987 .

[13]  Vasilis N. Burganos,et al.  Diffusion in pore networks: Effective medium theory and smooth field approximation , 1987 .

[14]  D. Dees,et al.  Conductivity of porous Ni/ZrO/sub 2/-Y/sub 2/O/sub 3/ cermets , 1987 .

[15]  Li Feng-wei.  An Unstructured/structured Multi-layer Hybrid Grid Method and Its Application , 2004 .

[16]  Alain Merlen,et al.  Cut cell strategy for 3-D blast waves numerical simulations , 2001 .

[17]  Robert J. Kee,et al.  Percolation theory to predict effective properties of solid oxide fuel-cell composite electrodes , 2009 .

[18]  Norberto Fueyo,et al.  Multimodal mass transfer in solid-oxide fuel-cells. , 2010 .

[19]  L. D. Jonghe,et al.  Ionic conductivity of stabilized zirconia networks in composite SOFC electrodes , 2004 .

[20]  Marcio Gameiro,et al.  Quantitative three-dimensional microstructure of a solid oxide fuel cell cathode , 2009 .

[21]  S. Torquato,et al.  Diffusion of finite‐sized Brownian particles in porous media , 1992 .

[22]  Ned Djilali,et al.  Prediction of the effective diffusion coefficient in random porous media using the finite element method , 2007 .

[23]  Christian Brosseau,et al.  Modelling and simulation of dielectric heterostructures: a physical survey from an historical perspective , 2006 .

[24]  C. Siegel.  Review of computational heat and mass transfer modeling in polymer-electrolyte-membrane (PEM) fuel cells , 2008 .

[25]  A. Malan,et al.  A cut‐cell non‐conforming Cartesian mesh method for compressible and incompressible flow , 2007 .

[26]  S. Chan,et al.  Anode Micro Model of Solid Oxide Fuel Cell , 2001 .

[27]  J. Heinrich,et al.  Mesh generation and flow calculations in highly contorted geometries , 1996 .

[28]  A. Abbaspour,et al.  A novel approach to study the structure versus performance relationship of SOFC electrodes , 2006 .

[29]  Hiroshi Iwai,et al.  Quantification of SOFC anode microstructure based on dual beam FIB-SEM technique , 2010 .

[30]  Salvatore Torquato,et al.  Efficient simulation technique to compute effective properties of heterogeneous media , 1989 .

[31]  Konstantin Mischaikow,et al.  Three-Dimensional Analysis of Solid Oxide Fuel Cell Ni-YSZ Anode Interconnectivity , 2009, Microscopy and Microanalysis.

[32]  Jon M. Hiller,et al.  Three-dimensional reconstruction of a solid-oxide fuel-cell anode , 2006, Nature materials.

[33]  Nobuhide Kasagi,et al.  Micro modeling of solid oxide fuel cell anode based on stochastic reconstruction , 2008 .

[34]  Jennifer L. M. Rupp,et al.  Review on microfabricated micro-solid oxide fuel cell membranes , 2009 .

[35]  Enrique Iglesia,et al.  The effects of diffusion mechanism and void structure on transport rates and tortuosity factors in complex porous structures , 2004 .

[36]  Steven Beale,et al.  Computer methods for performance prediction in fuel cells , 2003 .

[37]  Salvatore Torquato,et al.  STATISTICAL DESCRIPTION OF MICROSTRUCTURES , 2002 .

[38]  Thomas M Truskett,et al.  Is random close packing of spheres well defined? , 2000, Physical review letters.

[39]  S. Torquato.  Random Heterogeneous Materials , 2002 .

[40]  Fausto Arpino,et al.  A robust model and numerical approach for solving solid oxide fuel cell (SOFC) problems , 2008 .

[41]  D. P. Haughey,et al.  Structural properties of packed beds — A review , 1969 .

[42]  D. Bentz,et al.  Hydraulic radius and transport in reconstructed model three-dimensional porous media , 1994 .

[43]  Michael R. von Spakovsky,et al.  Direct numerical calculation of the kinematic tortuosity of reactive mixture flow in the anode layer of solid oxide fuel cells by the lattice Boltzmann method , 2007 .

[44]  M. E. Kainourgiakis,et al.  Diffusion and Flow in Porous Domains Constructed Using Process-Based and Stochastic Techniques , 2002 .

[45]  Paola Costamagna,et al.  Effect of composition on the performance of cermet electrodes. Experimental and theoretical approach , 2002 .

[46]  Jianmin Qu,et al.  Effective modulus and coefficient of thermal expansion of Ni-YSZ porous cermets , 2008 .

[47]  Hrvoje Jasak,et al.  A tensorial approach to computational continuum mechanics using object-oriented techniques , 1998 .

[48]  Salvatore Torquato,et al.  Effective conductivity of suspensions of overlapping spheres , 1992 .

[49]  E. Wachsman,et al.  Evaluation of the relationship between cathode microstructure and electrochemical behavior for SOFCs , 2009 .

[50]  Khiam Aik Khor,et al.  Cathode Micromodel of Solid Oxide Fuel Cell , 2004 .

[51]  S. V. Sotirchos,et al.  Ordinary and transition regime diffusion in random fiber structures , 1993 .

[52]  Nigel P. Brandon,et al.  Microstructural Modeling of Solid Oxide Fuel Cell Anodes , 2008 .

[53]  Félix Barreras,et al.  Study of the distribution of air flow in a proton exchange membrane fuel cell stack , 2009 .

[54]  N. Shikazono,et al.  Microstructure and polarization characteristics of anode supported tubular solid oxide fuel cell with co-precipitated and mechanically mixed Ni-YSZ anodes , 2009 .

[55]  Jon G. Pharoah,et al.  Computation of TPB length, surface area and pore size from numerical reconstruction of composite solid oxide fuel cell electrodes , 2009 .

[56]  V. Burganos.  Gas diffusion in random binary media , 1998 .

[57]  Ioannis Chatzis,et al.  Electrical Conductivity and Percolation Aspects of Statistically Homogeneous Porous Media , 1997 .

[58]  Wilson K. S. Chiu,et al.  Nondestructive Reconstruction and Analysis of SOFC Anodes Using X-ray Computed Tomography at Sub-50 nm Resolution , 2008 .

[59]  Robert J. Kee,et al.  Importance of Anode Microstructure in Modeling Solid Oxide Fuel Cells , 2008 .

[60]  Nicholas Zabaras,et al.  Classification and reconstruction of three-dimensional microstructures using support vector machines , 2005 .

[61]  Rintoul,et al.  Reconstruction of the Structure of Dispersions , 1997, Journal of colloid and interface science.

[62]  P. Shearing,et al.  3D reconstruction of SOFC anodes using a focused ion beam lift-out technique , 2009 .

[63]  Shenmin Zhang,et al.  A stochastic geometry based model for total triple phase boundary length in composite cathodes for solid oxide fuel cells , 2009 .

[64]  Cédric Gommes,et al.  Practical methods for measuring the tortuosity of porous materials from binary or gray‐tone tomographic reconstructions , 2009 .

[65]  J. Chung,et al.  Monte-Carlo simulation and performance optimization for the cathode microstructure in a solid oxide fuel cell , 2007 .

[66]  S. Torquato,et al.  Random Heterogeneous Materials: Microstructure and Macroscopic Properties , 2005 .

[67]  S. Barnett,et al.  Solid Oxide Fuel Cell Ni–YSZ Anodes: Effect of Composition on Microstructure and Performance , 2008 .

[68]  Fengwei Li,et al.  An unstructured/structured multi‐layer hybrid grid method and its application , 2007 .

[69]  Jun Yao,et al.  A new stochastic method of reconstructing porous media , 2007 .

[70]  Thomas M Truskett,et al.  Towards a quantification of disorder in materials: distinguishing equilibrium and glassy sphere packings , 2000, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[71]  Salvatore Torquato,et al.  Computer simulations of dense hard‐sphere systems , 1996 .

[72]  Ki Hyun Yoon,et al.  Quantitative analysis of microstructure and its related electrical property of SOFC anode, Ni-YSZ cermet , 2002 .

[73]  G. E. Archie.  The electrical resistivity log as an aid in determining some reservoir characteristics , 1942 .

[74]  Theodore T. Allen,et al.  Introduction to Engineering Statistics and Six Sigma: Statistical Quality Control and Design of Experiments and Systems , 2006 .

[75]  Steven Beale,et al.  A Distributed Resistance Analogy for Solid Oxide Fuel Cells , 2005 .

[76]  Rolf Landauer,et al.  The Electrical Resistance of Binary Metallic Mixtures , 1952 .