Balancing Control of AIT Leg Exoskeleton Using ZMP based FLC

This paper is focused on the use of Zero Moment Point (ZMP) concept for balancing control of the Asian Institute of Technology Leg EXoskeleton-I (ALEX-I). ALEX-I has been developed to assist patients who suffer from paraplegia or immobility due to the loss of power on lower limbs. The balanced posture set-points (joint trajectories) under ZMP criterion are generated offline. The ZMP based set points are provided as the desired postures to ALEX-I. Fuzzy Logic Controller (FLC) determines the modified set points based on postures balancing sensed by loadcells. Ground Contact Point (GCP) is used to find the “ZMP-like in real time”. GCP data is obtained by placing 4 loadcells forming a force plate on each foot of ALEX-I. This GCP data is then compared with the reference ZMP. Uncertainties of the model parameters, backlash, and joint tolerance are considered as disturbance. The differences of ZMP and GCP on x-z plane are used as the inputs to the FLC. The 4 outputs from FLC are the compensated angles of left and right ankles joints in roll and pitch axes that make the actual ZMP locate in the convex hull of the supporting area.

[1]  Lihua Huang,et al.  On the Control of the Berkeley Lower Extremity Exoskeleton (BLEEX) , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[2]  Jung-Shik Kong,et al.  Study on the Real-Time Walking Control of a Humanoid Robot Using Fuzzy Algorithm , 2008 .

[3]  D. Wollherr,et al.  A Jacobian Method for Online Modification of Precalculated Gait Trajectories , 2003 .

[4]  Gordon Cheng,et al.  Passivity-Based Full-Body Force Control for Humanoids and Application to Dynamic Balancing and Locomotion , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[5]  Yoshiyuki Sankai,et al.  Power assist method for HAL-3 estimating operator's intention based on motion information , 2003, The 12th IEEE International Workshop on Robot and Human Interactive Communication, 2003. Proceedings. ROMAN 2003..

[6]  Xiaopeng Liu,et al.  Development of a lower extremity exoskeleton for human performance enhancement , 2004, 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (IEEE Cat. No.04CH37566).

[7]  H. Kazerooni,et al.  Biomechanical design of the Berkeley lower extremity exoskeleton (BLEEX) , 2006, IEEE/ASME Transactions on Mechatronics.

[8]  Yoshiyuki Sankai,et al.  Power assist control for leg with HAL-3 based on virtual torque and impedance adjustment , 2002, IEEE International Conference on Systems, Man and Cybernetics.

[9]  Yoshiyuki Sankai,et al.  Comfortable power assist control method for walking aid by HAL-3 , 2002, IEEE International Conference on Systems, Man and Cybernetics.

[10]  R. Craik,et al.  Gait analysis : theory and application , 1995 .

[11]  Peter I. Corke.  The Machine Vision Toolbox: a MATLAB toolbox for vision and vision-based control , 2005, IEEE Robotics & Automation Magazine.

[12]  Ambarish Goswami,et al.  Postural Stability of Biped Robots and the Foot-Rotation Indicator (FRI) Point , 1999, Int. J. Robotics Res..

[13]  Chi Zhu,et al.  Walking principle analysis for biped robot with ZMP concept, friction constraint, and inverted pendulum model , 2003, Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2003) (Cat. No.03CH37453).

[14]  Adam Zoss,et al.  On the Biomimetic Design of the Berkeley Lower Extremity Exoskeleton (BLEEX) , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[15]  Miomir Vukobratovic,et al.  Zero-Moment Point - Thirty Five Years of its Life , 2004, Int. J. Humanoid Robotics.

[16]  Gordon Cheng,et al.  Disturbance Rejection for Biped Humanoids , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[17]  Dilip Kumar Pratihar,et al.  On-line stable gait generation of a two-legged robot using a genetic-fuzzy system , 2005, Robotics Auton. Syst..