Numerical and Experimental Investigations on the Loads Carried by the Tool During Friction Stir Welding

A computational fluid dynamics (CFD) model is presented for simulating the material flow and heat transfer in the friction stir welding (FSW) of 6061-T6 aluminum alloy (AA6061). The goal is to utilize the 3-D, numerical model to analyze the viscous and inertia loads applied to the FSW tool by varying the welding parameters. To extend the FSW process modeling, in this study, the temperature-dependant material properties as well as the stick/slip condition are considered where the material at the proximity of the FSW tool slips on the lower pressure regions. A right-handed one-way thread on a tilted FSW tool pin with a smooth, concaved shoulder is, additionally, considered to increase the accuracy of the numerical model. In addition, the viscous and frictional heating are assumed as the only sources of heat input. In the course of model verification, good agreements are found between the numerical results and the experimental investigations.

[1]  Jesper Henri Hattel,et al.  Heat source models in simulation of heat flow in friction stir welding , 2004 .

[2]  Hugh Shercliff,et al.  Microstructural modelling in friction stir welding of 2000 series aluminium alloys , 2005 .

[3]  Paul A. Colegrove,et al.  3-Dimensional CFD modelling of flow round a threaded friction stir welding tool profile , 2005 .

[4]  S. Mittal,et al.  Flow past a rotating cylinder , 2003, Journal of Fluid Mechanics.

[5]  L. F. Mondolfo.  Aluminum alloys: Structure and properties , 1976 .

[6]  J. Indacochea,et al.  Material flow patterns and cavity model in friction-stir welding of aluminum alloys , 2004 .

[7]  A. Reynolds,et al.  Visualization of the material flow in AA2195 friction-stir welds using a marker insert technique , 2001 .

[8]  S. Park,et al.  Microstructural factors governing hardness in friction-stir welds of solid-solution-hardened Al alloys , 2001 .

[9]  Radovan Kovacevic,et al.  Numerical Study of the Tool Rake Angle Effect on the Material Flow in Friction Stir Welding Process , 2007 .

[10]  R. R. Itharaju.  Friction stir processing of aluminum alloys , 2021, Indian Journal of Engineering and Materials Sciences.

[11]  Alvin M. Strauss,et al.  Experimental defect analysis and force prediction simulation of high weld pitch friction stir welding , 2006 .

[12]  A. Reynolds,et al.  Finite element simulation of material flow in friction stir welding , 2001 .

[13]  B. B. Grimmett,et al.  Friction stir welding studies on mild steel , 2003 .

[14]  R Kovacevic,et al.  Heat transfer modelling for both workpiece and tool in the friction stir welding process: A coupled model , 2004 .

[15]  S. C. Luo,et al.  A numerical study of flow past a rotating circular cylinder using a hybrid vortex scheme , 1995, Journal of Fluid Mechanics.

[16]  R Kovacevic,et al.  Thermomechanical modelling and force analysis of friction stir welding by the finite element method , 2004 .

[17]  Christophe Desrayaud,et al.  Mechanical and thermal modelling of Friction Stir Welding , 2006 .

[18]  T. Sheppard,et al.  Determination of flow stress: Part 1 constitutive equation for aluminium alloys at elevated temperatures , 1979 .

[19]  Jefferson W. Pew,et al.  A Torque Based Power Input Model for Friction Stir Welding , 2006 .

[20]  A. Jackson,et al.  Constitutive equations for use in prediction of flow stress during extrusion of aluminium alloys , 1997 .

[21]  William J. Arbegast,et al.  Friction stir welding after a decade of development , 2006 .

[22]  Yuh J. Chao,et al.  Heat Transfer in Friction Stir Welding—Experimental and Numerical Studies , 2003 .

[23]  K. Colligan.  Material flow behavior during friction stir welding of aluminum , 1999 .

[24]  Radovan Kovacevic,et al.  Material flow and microstructure in the friction stir butt welds of the same and dissimilar aluminum alloys , 2002 .

[25]  Pingsha Dong,et al.  Coupled thermomechanical analysis of friction stir welding process using simplified models , 2001 .

[26]  S. Kalidindi,et al.  Strain-path effects on the evolution of microstructure and texture during the severe-plastic deformation of aluminum , 2006 .

[27]  O. C. Zienkiewicz,et al.  Flow of solids during forming and extrusion: Some aspects of numerical solutions , 1978 .

[28]  Paul A. Colegrove,et al.  Development of Trivex friction stir welding tool Part 1 – two-dimensional flow modelling and experimental validation , 2004 .

[29]  Wei Zhang,et al.  Modeling of heat transfer and fluid flow during gas tungsten arc spot welding of low carbon steel , 2003 .

[30]  R. Nandan,et al.  Numerical simulation of three-dimensional heat transfer and plastic flow during friction stir welding , 2006 .