Active Control of Noise Propagating in Ducts

[1]  Michael J. Brennan,et al.  Active isolation of a flexible structure from base vibration , 2003 .

[2]  Kh. Eghtesadi,et al.  Energy Conservation by Active Noise Attenuation in Ducts , 1986 .

[3]  L. J. Eriksson,et al.  Use of random noise for on‐line transducer modeling in an adaptive active attenuation system , 1986 .

[4]  Stephen J. Elliott,et al.  A multiple error LMS algorithm and its application to the active control of sound and vibration , 1987, IEEE Trans. Acoust. Speech Signal Process..

[5]  A. D. White,et al.  An adaptive controller for multivariable active noise control , 1984 .

[6]  David Crolla,et al.  ACTIVE SUSPENSION CONTROL; PERFORMANCE COMPARISONS USING CONTROL LAWS APPLIED TO A FULL VEHICLE MODEL , 1991 .

[7]  Toshio Yoshimura,et al.  CONSTRUCTION OF AN ACTIVE SUSPENSION SYSTEM OF A QUARTER CAR MODEL USING THE CONCEPT OF SLIDING MODE CONTROL , 2001 .

[8]  D. Hrovat.  OPTIMAL SUSPENSION PERFORMANCE FOR 2-D VEHICLE MODELS , 1991 .

[9]  H. G. Leventhall,et al.  An experimental study of swinbanks' method of active attenuation of sound in ducts , 1976 .

[10]  Jeong-Hoi Koo,et al.  In Search of Suitable Control Methods for Semi-Active Tuned Vibration Absorbers , 2004 .

[11]  I. C. Shepherd,et al.  The influence of waveguide reflections and system configuration on the performance of an active noise attenuator , 1985 .

[12]  M. Nakano,et al.  Optimum Preview Control of Vehicle Air Suspensions , 1976 .

[13]  M. M. El Madany,et al.  Performance of actively suspended cabs in highway trucks—Evaluation and optimization , 1988 .

[14]  M. J. Vanderploeg,et al.  A vehicle handling model with active suspensions , 1989 .

[15]  Larry J. Eriksson,et al.  The selection and application of an IIR adaptive filter for use in active sound attenuation , 1987, IEEE Trans. Acoust. Speech Signal Process..

[16]  Boeing Vertol Co.,et al.  Active Control of The Helicopter Rotor for Vibration Reduction , 1980 .

[17]  Roshun Paurobally.  The mechanisms of feedback control active ear defenders , 2006 .

[18]  P. E. Doak,et al.  Excitation, transmission and radiation of sound from source distributions in hard-walled ducts of finite length (II): The effects of duct length , 1973 .

[19]  Ch. Kessler,et al.  Active rotor control for helicopters: motivation and survey on higher harmonic control , 2011 .

[20]  W. Gevarter.  Basic relations for control of flexible vehicles , 1969 .

[21]  C. D. de Benito,et al.  Control of an Active Suspension System Subject to Random Component Failures , 1990 .

[22]  Johari Halim Shah Osman,et al.  A class of proportional-integral sliding mode control with application to active suspension system , 2004, Syst. Control. Lett..

[23]  Dean Karnopp,et al.  Vibration Control Using Semi-Active Force Generators , 1974 .

[24]  Goodarz Ahmadi,et al.  Optimal Active Control of Vehicle Suspension System Including Time Delay and Preview for Rough Roads , 2002 .

[25]  Bo-Ha Lee,et al.  Model based feed-forward control of electromagnetic type active control engine mount system = 전자석 구동형 능동 엔진 마운트의 모델 기반 제어 , 2009 .

[26]  M. Bérengier,et al.  Broad-band active sound absorption in a duct carrying uniformly flowing fluid , 1980 .

[27]  Colin H. Hansen,et al.  Power transmission from a vibrating body to a circular cylindrical shell through passive and active isolators , 1997 .

[28]  Karolos M. Grigoriadis,et al.  A Linear Parameter-varying Framework for Adaptive Active Microgravity Isolation , 2009 .

[29]  Marek Pawelczyk,et al.  Analogue active noise control , 2002 .

[30]  Richard S. Teal,et al.  Higher Harmonic Control: Wind Tunnel Demonstration of Fully Effective Vibratory Hub Force Suppression , 1985 .

[31]  G. Mangiante,et al.  Active sound absorbers in an air duct , 1972 .

[32]  Luca Zaccarian,et al.  An anti-windup strategy for active vibration isolation systems , 2006 .

[33]  R S Sharp,et al.  The Relative Performance Capabilities of Passive, Active and Semi-Active Car Suspension Systems , 1986 .

[34]  H. G. Leventhall,et al.  Active attenuation of noise: The Chelsea dipole , 1981 .

[35]  Philip A. Nelson,et al.  Active reduction of a one‐dimensional enclosed sound field: An experimental investigation of three control strategies , 1990 .

[36]  L.V.V. Gopala Rao,et al.  Preview control of random response of a half-car vehicle model traversing rough road , 2008 .

[37]  Toshio Yoshimura,et al.  Stochastic optimal control of vehicle suspension with preview on an irregular surface , 1991 .

[38]  M. F. Golnaraghi,et al.  Semi-active engine mount design using auxiliary magneto-rheological fluid compliance chamber , 2011 .

[39]  R. J. Pinnington,et al.  Vibrational power transmission to a seating of a vibration isolated motor , 1987 .

[40]  J. L. Sproston,et al.  Identification of the Damping Law of an Electro-Rheological Fluid: A Sequential Filtering Approach , 1989 .

[41]  Jan J. Krüger,et al.  THE CALCULATION OF ACTIVELY ABSORBING SILENCERS IN RECTANGULAR DUCTS , 2002 .

[42]  M. F. Golnaraghi,et al.  A Novel Semi-active Magnetorheological Bushing Design for Variable Displacement Engines , 2008 .

[43]  Michael J. Brennan.  Some recent developments in adaptive tuned vibration absorbers/neutralisers , 2006 .

[44]  S. P. King,et al.  The minimisation of helicopter vibration through blade design and active control , 1988, The Aeronautical Journal (1968).

[45]  Seung-Bok Choi,et al.  Performance Evaluation of a Mixed Mode ER Engine Mount Via Hardware-in-the-Loop Simulation , 1999 .

[46]  Inderjit Chopra,et al.  Application of Higher Harmonic Control to Rotors Operating at High Speed and Thrust , 1990 .

[47]  John Shaw,et al.  Helicopter Vibration Reduction with Higher Harmonic Blade Pitch , 1978 .

[48]  Shiang-Hwua Yu,et al.  Controller design for active noise cancellation headphones using experimental raw data , 2001 .

[49]  Nagi G. Naganathan,et al.  A literature review of automotive vehicle engine mounting systems , 2001 .

[50]  Konghui Guo,et al.  Constrained H/sub /spl infin// control of active suspensions: an LMI approach , 2005, IEEE Transactions on Control Systems Technology.

[52]  N. K. Gupta,et al.  A New Approach for Active Control of Rotorcraft Vibration , 1982 .

[53]  Mark Whorton.  Robust Control for Microgravity Vibration Isolation System , 2005 .

[54]  B. F. Spencer,et al.  STATE OF THE ART OF STRUCTURAL CONTROL , 2003 .

[55]  Jun-Sik Kim,et al.  Development of a resonant trailing-edge flap actuation system for helicopter rotor vibration control , 2007 .

[56]  Philip A. Nelson,et al.  Active Isolation of Periodic Machinery Vibrations , 1993 .

[57]  B. R. Davis,et al.  An Optimal Linear Active Suspension with Finite Road Preview , 1980 .

[58]  Dennis S. Bernstein,et al.  Higher-Harmonic-Control Algorithm for Helicopter Vibration Reduction Revisited , 2005 .

[59]  Michael J. Brennan,et al.  Vibration control using an adaptive tuned vibration absorber with a variable curvature stiffness element , 2005 .

[60]  André Preumont,et al.  FORCE FEEDBACK VERSUS ACCELERATION FEEDBACK IN ACTIVE VIBRATION ISOLATION , 2002 .

[61]  P. Doak.  Excitation, transmission and radiation of sound from source distributions in hard-walled ducts of finite length (I): The effects of duct cross-section geometry and source distribution space-time pattern , 1973 .

[62]  Kh. Eghtesadi,et al.  The effects of non-ideal elements and geometry on the performance of the Chelsea dipole active attenuator , 1983 .

[63]  Thomas H. Rockwell,et al.  Theoretical and Experimental Results on Active Vibration Dampers , 1962 .

[64]  C. Wallace.  Radiation Resistance of a Rectangular Panel , 1972 .

[65]  E. K. Bender,et al.  Optimum Linear Preview Control With Application to Vehicle Suspension , 1968 .

[66]  Davorin David Hrovat,et al.  Some characteristics of optimal vehicle suspensions based on quarter-car models , 1990, 29th IEEE Conference on Decision and Control.

[67]  I. Youn,et al.  Semi-active suspensions with adaptive capability , 1995 .

[68]  Wei-Hsin Liao,et al.  Semi-active suspension systems for railway vehicles using magnetorheological dampers. Part I: system integration and modelling , 2009 .

[69]  Hiroshi Matsuhisa,et al.  Semi-active vibration isolation system with variable stiffness and damping control , 2008 .

[70]  Toshio Yoshimura,et al.  An active vertical suspension for track/vehicle systems , 1986 .

[71]  Colin H. Hansen,et al.  Suppression of maglev vehicle–girder self-excited vibration using a virtual tuned mass damper , 2011 .

[72]  Stephen J. Elliott,et al.  Multichannel feedback control for the isolation of base-excited vibration , 2000 .

[73]  C. F. Ross.  An algorithm for designing a broadband active sound control system , 1982 .

[74]  Zhang Yu,et al.  Digital active ear defender , 1996, Proceedings of Third International Conference on Signal Processing (ICSP'96).

[75]  Sen M. Kuo,et al.  Active noise control for motorcycle helmets , 2010, The 2010 International Conference on Green Circuits and Systems.

[76]  Colin H. Hansen,et al.  Application of least mean square algorithm to suppression of maglev track-induced self-excited vibration , 2011 .

[77]  Kh. Eghtesadi,et al.  The tight‐coupled monopole (TCM) and tight‐coupled tandem (TCT) attenuators: Theoretical aspects and experimental attenuation in an air duct , 1987 .

[78]  Inderjit Chopra,et al.  Status of Application of Smart Structures Technology to Rotorcraft Systems , 2000 .

[79]  R S Sharp,et al.  Performance and Design Considerations for Dissipative Semi-Active Suspension Systems for Automobiles , 1987 .

[80]  Colin H. Hansen,et al.  Review of coupled vibration problems in EMS maglev vehicles , 2010 .

[81]  Ml Munjal,et al.  An exact one‐dimensional analysis of the acoustic sensitivity of the antiturbulence probe tube in a duct , 1989 .

[82]  Joel A. Levitt,et al.  The Influence of Tire Damping in Quarter Car Active Suspension Models , 1991 .

[83]  W. Neise,et al.  Active source cancellation of the blade tone fundamental and harmonics in centrifugal fans , 1988 .

[84]  Seung-Bok Choi,et al.  Human simulated intelligent control of vehicle suspension system with MR dampers , 2009 .

[85]  Ka C. Cheok,et al.  Discrete-time frequency-shaping parametric LQ control with application to active seat suspension control , 1989 .

[86]  Colin H. Hansen,et al.  Active control of power flow from a vibrating rigid body to a flexible panel through two active isolators , 1993 .

[87]  G. J. Stein,et al.  A Driver’s Seat With Active Suspension of Electro-pneumatic Type , 1997 .

[88]  Cristiano Spelta,et al.  Mixed Sky-Hook and ADD: Approaching the Filtering Limits of a Semi-Active Suspension , 2007 .

[89]  P. Nelson,et al.  Active noise control in finite length ducts , 1983 .

[90]  Alain Roure,et al.  Self-adaptive broadband active sound control system , 1985 .

[91]  A. Cabelli,et al.  The influence of turbulent pressure fluctuations on an active attenuator in a flow duct , 1989 .

[92]  An-Pei Wang,et al.  VIBRATION CONTROL OF A TALL BUILDING SUBJECTED TO EARTHQUAKE EXCITATION , 2007 .

[93]  Mohamed Abdel-Rohman.  Feasibility of Active Control of Tall Buildings Against Wind , 1987 .

[94]  M. F. Golnaraghi,et al.  Semi-active Vibration Control Schemes for Suspension Systems Using Magnetorheological Dampers , 2006 .

[95]  Boaz Rafaely,et al.  Combined feedback-feedforward active noise-reducing headset--the effect of the acoustics on broadband performance. , 2002, The Journal of the Acoustical Society of America.

[96]  Yu Gong,et al.  A robust hybrid feedback active noise cancellation headset , 2005, IEEE Transactions on Speech and Audio Processing.

[97]  Ronald W. Du Val,et al.  Design and evaluation of a state-feedback vibration controller , 1984 .

[98]  Paul Sas,et al.  Design of an active exhaust attenuating valve for internal combustion engines , 2002 .

[99]  Peretz P. Friedmann,et al.  Vibration reduction in rotorcraft using active control - A comparison of various approaches , 1995 .

[100]  A. Curtis,et al.  Active suppression of acoustic resonance , 1987 .

[101]  Kh. Eghtesadi,et al.  A study of n-source active attenuator arrays for noise in ducts , 1983 .

[102]  M. M. ElMadany,et al.  Dynamic Analysis of a Slow-active Suspension System Based on a Full Car Model , 2011 .

[103]  William B. Conover,et al.  Fighting Noise with Noise , 1956 .

[104]  D. Karnopp.  Analytical Results for Optimum Actively Damped Suspensions Under Random Excitation , 1989 .

[105]  Sinan Korkmaz,et al.  Review: A review of active structural control: challenges for engineering informatics , 2011 .

[106]  D. Hrovat,et al.  Survey of Advanced Suspension Developments and Related Optimal Control Applications, , 1997, Autom..

[107]  Ch. Kessler,et al.  Active rotor control for helicopters: individual blade control and swashplateless rotor designs , 2011 .

[108]  Takuji Mori,et al.  Application of AAC silencer to reduce automobile exhaust noise , 1991 .

[109]  Lars Håkansson,et al.  Active Noise Control for Hearing Protection using a Lowpower Fixed Point Digital Signal Processor , 2005 .

[110]  D. Hrovat,et al.  Stability Robustness of LQG Active Suspensions , 1990, 1990 American Control Conference.

[111]  A. G. Thompson,et al.  An Active Suspension with Optimal Linear State Feedback , 1976 .

[112]  Ml Munjal,et al.  Analysis of a hybrid noise control system for a duct , 1989 .

[113]  R. J. Bernhard,et al.  Active Control of High Order Acoustical Modes in a Semi-Infinite Waveguide , 1991 .

[114]  H. G. Leventhall,et al.  Active attenuation of noise in ducts , 1978 .

[115]  J. K. Hedrick,et al.  Decoupled Active Suspension Design for Improved Automotive Ride Quality/Handling Performance , 1985 .

[116]  Charles E. M. Pearce,et al.  PHYSICALLY REALISABLE FEEDBACK CONTROLS FOR A FULLY ACTIVE PREVIEW SUSPENSION APPLIED TO A HALF-CAR MODEL , 1998 .

[117]  M. M. ElMadany,et al.  On the statistical performance of active and semi-active car suspension systems , 2014 .

[118]  S. Sankar,et al.  A New Concept in Semi-Active Vibration Isolation , 1987 .

[119]  L. J. Eriksson,et al.  II. Recursive Algorithms for Active Noise Control , 1991 .

[120]  Roberto Zanasi,et al.  Control of port Hamiltonian systems by dissipative devices and its application to improve the semi-active suspension behaviour , 2006 .

[121]  A R Palmer,et al.  Active control of the volume acquisition noise in functional magnetic resonance imaging: method and psychoacoustical evaluation. , 2001, The Journal of the Acoustical Society of America.

[122]  Scott D. Sommerfeldt,et al.  Adaptive control of a two-stage vibration isolation mount , 1990 .

[123]  David Alan Bies.  Feasibility Study of a Hybrid Vibration Isolation System , 1968 .

[124]  J. K. Hedrick,et al.  Alternative Control Laws for Automotive Active Suspensions , 1989 .

[125]  Colin H. Hansen,et al.  Power Transmission from a Vibrating Source through an Intermediate Flexible Panel to a Flexible Cylinder , 1994 .

[126]  M. R. Paurobally,et al.  The mechanisms of passive ear defenders , 2000 .

[127]  Colin H. Hansen,et al.  Active isolation of a vibration source from a thin beam using a single active mount , 1993 .

[128]  Robin S. Sharp,et al.  On the Performance Capabilities of Active Automobile Suspension Systems of Limited Bandwidth , 1987 .

[129]  Peter David Wheeler,et al.  Voice communications in the cockpit noise environment : the role of active noise reduction , 1986 .

[130]  Sergio M. Savaresi,et al.  On performance evaluation methods and control strategies for semi-active suspension systems , 2003, 42nd IEEE International Conference on Decision and Control (IEEE Cat. No.03CH37475).

[131]  C. Hansen,et al.  Erratum: “Power transmission from a vibrating body to a circular cylindrical shell through passive and active isolators” [J. Acoust. Soc. Am. 101, 1479–1491 (1997)] , 2000 .

[132]  I. C. Shepherd,et al.  An experimental study of a broadband active attenuator for cancellation of random noise in ducts , 1983 .

[133]  J. N. Yang,et al.  Active Control of Seismic‐Excited Buildings , 1985 .

[134]  Michael Valášek,et al.  Extended Ground-Hook - New Concept of Semi-Active Control of Truck's Suspension , 1997 .

[135]  Woon-Seng Gan,et al.  Active noise control system for headphone applications , 2006, IEEE Transactions on Control Systems Technology.

[136]  Michael J. Brennan,et al.  Instabilities due to instrumentation phase-lead and phase-lag in the feedback control of a simple vibrating system , 2007 .

[137]  M. F. Golnaraghi,et al.  Active decoupler hydraulic engine mount design with application to variable displacement engine , 2011 .

[138]  Jian-Qiao Sun,et al.  Passive, Adaptive and Active Tuned Vibration Absorbers—A Survey , 1995 .

[139]  M. A. Swinbanks.  The active control of sound propagation in long ducts , 1973 .

[140]  Ken'iti Kido,et al.  Active Reduction of Noise by Additional Noise Source and Its Limit , 1989 .

[141]  J. R. Velman,et al.  Active Local Vibration Isolation Applied to a Flexible Space Telescope , 1980 .

[142]  Say Wei Foo,et al.  Active noise cancellation headset , 2005, 2005 IEEE International Symposium on Circuits and Systems.

[143]  Kh. Eghtesadi,et al.  The tight-coupled monopole active attenuator in a duct , 1983 .

[144]  Wei-Hsin Liao,et al.  Semi-active suspension systems for railway vehicles using magnetorheological dampers. Part II: simulation and analysis , 2009 .

[145]  Philip A. Nelson,et al.  The active minimization of harmonic enclosed sound fields, part I: Theory , 1987 .

[146]  T. Shimogo,et al.  Optimal Preview Control of Vehicle Suspension , 1975 .

[147]  Robert O. Ambrose,et al.  An active suspension system for lunar crew mobility , 2010, 2010 IEEE Aerospace Conference.

[148]  T. T. Soong,et al.  Supplemental energy dissipation: state-of-the-art and state-of-the- practice , 2002 .

[149]  A. G. Thompson,et al.  An Optimal Suspension for an Automobile on a Random Road , 1979 .

[150]  G Chen,et al.  MR damper and its application for semi-active control of vehicle suspension system , 2002 .

[151]  Nurkan Yagiz,et al.  Fuzzy Sliding-Mode Control of Active Suspensions , 2008, IEEE Transactions on Industrial Electronics.

[152]  R. J. Pinnington,et al.  Power flow through machine isolators to resonant and non-resonant beams , 1981 .

[153]  C H Hansen,et al.  Active noise control in ducts: some physical insights. , 1989, The Journal of the Acoustical Society of America.

[154]  Claes Olsson,et al.  Active automotive engine vibration isolation using feedback control , 2006 .

[155]  B. B. Litkouhi,et al.  On-board sensor failure detection of an active suspension system using the generalized likelihood ratio approach , 1988, Proceedings of the 27th IEEE Conference on Decision and Control.

[156]  L. Eriksson.  Development of the filtered‐U algorithm for active noise control , 1990 .

[157]  H. Metered,et al.  The experimental identification of magnetorheological dampers and evaluation of their controllers , 2010 .

[158]  G. V. Raju,et al.  Stochastic optimal control of non-stationary response of a single-degree-of-freedom vehicle model , 1990 .

[159]  Michael J. Brennan,et al.  Active vibration isolation of a system with a distributed parameter isolator using absolute velocity feedback control , 2010 .

[160]  Michael J. Brennan,et al.  Mobility analysis of active isolation systems , 2004 .

[161]  Laura R Ray,et al.  Experimental evaluation of leaky least-mean-square algorithms for active noise reduction in communication headsets. , 2002, The Journal of the Acoustical Society of America.

[162]  Juhei Takahashi,et al.  Development of Acceleration Sensor and Acceleration Evaluation System for Super Low Range Frequency , 1991 .

[163]  S. A. Hassan,et al.  The Application of Linear Optimal Control Theory to the Design of Active Automotive Suspensions , 1986 .

[164]  J. L. Sproston,et al.  The electrorheological automotive engine mount , 1994 .

[165]  Y. Kikushima,et al.  Rigid support active vibration isolation , 1988 .

[166]  A. Cabelli,et al.  Characteristics of loudspeakers operating in an active noise attenuator , 1986 .

[167]  J. Burgess.  Active adaptive sound control in a duct: A computer simulation , 1981 .

[168]  Jung-Shan Lin,et al.  Nonlinear design of active suspensions , 1997 .

[169]  Anthony J. Calise,et al.  Active Vibration Control Using Fixed Order Dynamic Compensation With Frequency Shaped Cost Functionals , 1991, 1991 American Control Conference.

[170]  Harry F. Olson,et al.  Electronic Control of Noise, Vibration, and Reverberation , 1956 .

[171]  Javad Marzbanrad,et al.  Stochastic optimal preview control of a vehicle suspension , 2004 .

[172]  Ml Munjal,et al.  An analytical, one‐dimensional, standing‐wave model of a linear active noise control system in a duct , 1988 .

[173]  C. F. Ross.  An adaptive digital filter for broadband active sound control , 1982 .

[174]  R. D. Ford,et al.  Power requirements for active noise control in ducts , 1984 .

[175]  A. Zander,et al.  A comparison of error sensor strategies for the active control of duct noise , 1993 .

[176]  Colin H. Hansen,et al.  Suppression of Maglev Track-Induced Self-Excited Vibration Using an Adaptive Cancellation Algorithm , 2010 .

[177]  Malcolm J. Crocker,et al.  Theory and Measurement of Modal Spectra in Hard-Walled Cylindrical Ducts , 1971 .

[178]  Mats Åbom,et al.  Modal decomposition in ducts based on transfer function measurements between microphone pairs , 1989 .

[179]  P M Nelson,et al.  Active control of commercial vehicle exhaust noise , 1986 .

[180]  Chi-Chang Lin,et al.  Active control of irregular buildings considering soil–structure interaction effects , 2010 .

[181]  L. A. Poole,et al.  The implementation of digital filters using a modified Widrow-Hoff algorithm for the adaptive cancellation of acoustic noise , 1984, ICASSP.

[182]  L. R. Miller.  Tuning passive, semi-active, and fully active suspension systems , 1988, Proceedings of the 27th IEEE Conference on Decision and Control.

[183]  Norman M. Wereley,et al.  Performance of higher harmonic control algorithms for helicopter vibration reduction , 1993 .

[184]  Toshio Yoshimura,et al.  An active lateral suspension to a track/vehicle system using stochastic optimal control , 1987 .

[185]  Miao Yu,et al.  Comparative research on semi-active control strategies for magneto-rheological suspension , 2010 .

[186]  Gary J. Balas,et al.  Road adaptive active suspension design using linear parameter-varying gain-scheduling , 2002, IEEE Trans. Control. Syst. Technol..

[187]  Nader Jalili,et al.  A Comparative Study and Analysis of Semi-Active Vibration-Control Systems , 2002 .

[188]  Ken'iti Kido,et al.  Stable method for active cancellation of duct noise by synthesized sound , 1987 .

[189]  M. Tomizuka.  Optimal continuous finite preview problem , 1975 .

[190]  Stephen J. Elliott,et al.  Feedback stability limits for active isolation systems with reactive and inertial actuators , 2001 .

[191]  Cheng-Yuan Chang,et al.  Microcontroller based active noise controller in headphones , 2010, 2010 International Conference on System Science and Engineering.

[192]  Anthony J. Brammer,et al.  Broad-band active noise reduction in communication headsets by digital feedforward control , 1994 .

[193]  Ka C. Cheok,et al.  Lyapunov stability analysis for self-learning neural model with application to semi-active suspension control system , 1989, Proceedings. IEEE International Symposium on Intelligent Control 1989.

[194]  Kum-Gil Sung,et al.  Optimal control of structural vibrations using a mixed-mode magnetorheological fluid mount , 2008 .

[195]  Alain Roure,et al.  Radiation impedance of one or several real sources mounted in a hard-walled rectangular waveguide , 1980 .

[196]  Sergio M. Savaresi,et al.  Acceleration-Driven-Damper (ADD): An Optimal Control Algorithm For Comfort-Oriented Semiactive Suspensions , 2005 .

[197]  Honghai Liu,et al.  State of the Art in Vehicle Active Suspension Adaptive Control Systems Based on Intelligent Methodologies , 2008, IEEE Transactions on Intelligent Transportation Systems.

[198]  Philip A. Nelson,et al.  Active Control of Vibration in Structures , 1996 .

[199]  S. C. Southward,et al.  Active Control of Noise and Vibration , 1996 .

[200]  M. M. ElMadany,et al.  Ride Performance Potential of Active Fast Load Leveling Systems , 1990 .

[201]  Dongpu Cao,et al.  Editors’ perspectives: road vehicle suspension design, dynamics, and control , 2011 .

[202]  Michael J. Brennan,et al.  TECHNICAL NOTE: A demonstration of active vibration isolation using decentralized velocity feedback control , 2006 .

[203]  E. Hendricks,et al.  Active cancellation of noise in a liquid-filled pipe using an adaptive filter , 1988 .

[204]  Colin H. Hansen,et al.  Total power flow from a vibrating rigid body to a thin panel through multiple elastic mounts , 1992 .

[205]  Michael J. Brennan,et al.  Decentralized control for multichannel active vibration isolation , 2001, IEEE Trans. Control. Syst. Technol..

[206]  Lars G. Johansen,et al.  Active Noise Cancelling in Headsets: Limitations caused by Non-Minimum Phase Transfer Function of the Cancelling Sound Source , 1997 .

[207]  David Crolla,et al.  Road Vehicle Suspension System Design - a review , 1987 .

[208]  Ka C. Cheok,et al.  Model reference adaptive control for vehicle active suspension systems , 1991 .