Effects of the geometrical features of flow paths on the flow capacity of a control valve trim

[1]  D. Spalding,et al.  A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows , 1972 .

[2]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[3]  Rakesh Mishra,et al.  Optimal design of a multi-stage capsule handling multi-phase pipeline , 1998 .

[4]  John D. Fieldhouse,et al.  A computational fluid dynamic analysis on the effect of front row pin geometry on the aerothermodynamic properties of a pin-vented brake disc , 2008 .

[5]  Matthew Charlton,et al.  Validation of CFD predictions using process data obtained from flow through an industrial control valve , 2012 .

[6]  Matthew Charlton,et al.  Local Analysis of Flow Conditions within a Geometrically Complex Control Valve Trim using CFD , 2012 .

[7]  Rakesh Mishra,et al.  Computational Fluid Dynamics based Fault Simulations of a Vertical Axis Wind Turbines , 2012 .

[8]  Taimoor Asim,et al.  Optimal design of a four-sensor probe system to measure the flow properties of the dispersed phase in bubbly air–water multiphase flows , 2013 .

[9]  Taimoor Asim,et al.  Performance of a Vertical Axis Wind Turbine under Accelerating and Decelerating Flows , 2013 .

[10]  Rakesh Mishra,et al.  LHV predication models and LHV effect on the performance of CI engine running with biodiesel blends. , 2013 .

[11]  Taimoor Asim,et al.  Optimal sizing and life-cycle cost modelling of pipelines transporting multi-sized solid–liquid mixtures , 2014 .

[12]  Matthew Charlton.  Cost Effective Manufacturing and Optimal Design of X-Stream Trims for Severe Service Control Valves , 2014 .

[13]  Edward Lisowski,et al.  CFD analysis of the characteristics of a proportional flow control valve with an innovative opening shape , 2016 .

[14]  Rakesh Mishra,et al.  Development of a Design Methodology for Hydraulic Pipelines Carrying Rectangular Capsules , 2016 .

[15]  Rakesh Mishra,et al.  Capacity Testing and Local Flow Analysis of Geometrically Complex Trims Installed Within a Commercial Control Valve , 2016 .

[16]  Rakesh Mishra,et al.  Computational fluid dynamics based optimal design of hydraulic capsule pipelines transporting cylindrical capsules , 2016 .

[17]  Rakesh Mishra,et al.  Optimal design of hydraulic capsule pipelines transporting spherical capsules , 2016 .

[18]  Taimoor Asim,et al.  The effect of manufacturing method induced roughness on severe service control valve performance , 2016 .

[19]  Taimoor Asim,et al.  CFD based Investigations for the Design of Severe Service Control Valves used in Energy Systems , 2017 .

[20]  Taimoor Asim,et al.  Large-Eddy-Simulation-based analysis of complex flow structures within the volute of a vaneless centrifugal pump , 2017, Sādhanā.

[21]  Xiaoming Zhou,et al.  A simple method for high-precision evaluation of valve flow coefficient by computational fluid dynamics simulation , 2017 .

[22]  Chul-Kyu Kim,et al.  Numerical investigation of the effect of surface roughness on the flow coefficient of an eccentric butterfly valve , 2017 .

[23]  T. Asim,et al.  Effect of Capsule Shape on Hydrodynamic Characteristics and Optimal Design of Hydraulic Capsule Pipelines , 2018 .

[24]  Wei Wei,et al.  Application of flow field decomposition and reconstruction in studying and modeling the characteristics of a cartridge valve , 2018 .

[25]  T. Asim,et al.  Development of a Novel Characterisation Methodology for the Aerodynamic Coefficients of a Tractor–Trailer Unit Based on Relative Flow Angles and Vehicle Dimensions , 2018 .

[26]  Mihai Dupac,et al.  Engineering Applications , 2021 .