High temperature humidity sensors based on sputtered Y-doped BaZrO3 thin films

Abstract Sputter deposited Y-doped BaZrO 3 thin films (BaZr x Y 1− x O 3− y /2 , x  = 0.2, y  > 0), were investigated as to their viability for reliable, long-term stable humidity or water vapor microsensors operating at high operating temperatures ( T  > 400 °C). Reliable exhaust gas composition measurements at these temperatures could allow optimization of power plant efficiency and reduce emissions. Electrical conductivity and gas sensitivity tests on bulk Y-doped BaZrO 3 in environments with varying humidity suggest that this material could be suitable as a highly selective humidity sensor with sensitivities between 2 atm −1 and 26 atm −1 in the temperature range of 500–700 °C, based on an ionic proton conduction mechanism [W. Wang, A.V. Virkar, Ionic and electron–hole conduction in BaZr 0.93 Y 0.07 O 3− δ by 4-probe dc measurements, J. Power Sources 142 (2005) 1–9; W. Wang, A.V. Virkar, A conductimetric humidity sensor based on proton conducting perovskite oxides, J. Sens. Actuators, B, Chem. 98 (2004) 282–290]. Thin films of BaZrO 3 :Y were investigated for their potential to significantly reduce sensor response time, increase sensitivity, and allow integration in microsensor platforms. Unlike other sensors that are based on adsorption, the sensing mechanism presented here at temperatures >400 C should be based on absorption of H 2 O, which dissolves into the BaZrO 3 :Y lattice, “fills in” the oxygen vacancies, and releases protons. Since protons have a higher mobility than oxygen ions, they would dominate the electric conductivity. XRD spectra from all as-deposited and annealed BaZrO 3 :Y films show that the material changed from amorphous to crystalline at annealing temperatures >500 °C. After annealing, the samples exhibit an increasing particle size from 70 nm to 167 nm and an increase of root mean squared (RMS) roughness (from 1.3 nm to 4.2 nm) with increasing film thickness (200–500 nm). The film conductivity increases as a function of temperature (from 100 °C to 400 °C) and upon exposure to a humid atmosphere, supporting our hypothesis of a proton conduction based conduction and sensing mechanism. The water vapor sensitivity was measured using 0.058 atm partial pressure of water at 400 °C. Sensitivity values ranging from 22 atm −1 to 62 atm −1 with a response time of τ 60  ≈ 6 s were achieved. We have demonstrated Y-doped BaZrO 3 thin film humidity sensors that operate at high temperatures.

[1]  A. Virkar,et al.  A conductimetric humidity sensor based on proton conducting perovskite oxides , 2004 .

[2]  Ettore Massera,et al.  A very sensitive porous silicon based humidity sensor , 2005 .

[3]  Enrico Traversa,et al.  Ceramic sensors for humidity detection: the state-of-the-art and future developments , 1995 .

[4]  Asao Nishimura,et al.  Evaluating IC-package interface delamination by considering moisture-induced molding-compound swelling , 1999 .

[5]  Noboru Yamazoe,et al.  Humidity sensors: Principles and applications , 1986 .

[6]  A. Nowick,et al.  High-temperature protonic conductors with perovskite-related structures , 1995 .

[7]  R. L. Shook,et al.  Impact of moisture/reflow induced delaminations on integrated circuit thermal performance , 1994, 1994 Proceedings. 44th Electronic Components and Technology Conference.

[8]  M. Gong,et al.  Thick films of copper-titanate resistive humidity sensor , 2005 .

[9]  T. Schneller,et al.  Chemical solution deposition prepared dense proton conducting Y-doped BaZrO3 thin films for SOFC and sensor devices , 2003 .

[10]  E. Heifets,et al.  Ab initio simulation of the BaZrO3 (001) surface structure , 2007 .

[11]  G. L. Sharma,et al.  Novel ammonia-sensing phenomena in sol–gel derived Ba0.5Sr0.5TiO3 thin films , 2005 .

[12]  Tatsumi Ishihara,et al.  Doped LaGaO3 Perovskite Type Oxide as a New Oxide Ionic Conductor , 1994 .

[13]  Karen Twomey,et al.  A Ceramic Thick Film Humidity Sensor Based on MnZn Ferrite , 2002 .

[14]  M. Inaba,et al.  Effects of mixed conduction on the open-circuit voltage of intermediate-temperature SOFCs based on Sm-doped ceria electrolytes , 2005 .

[15]  H. Iwahara,et al.  Proton Conduction in Sintered Oxides Based on BaCeO3 , 1988 .

[16]  Maria Luisa Grilli,et al.  Nano-structured perovskite oxide electrodes for planar electrochemical sensors using tape casted YSZ layers , 2004 .

[17]  Hai-Feng Ji,et al.  Al2O3-coated microcantilevers for detection of moisture at ppm level , 2008 .

[18]  A. Virkar,et al.  Ionic and electron–hole conduction in BaZr0.93Y0.07O3−δ by 4-probe dc measurements , 2005 .

[19]  Yoshihiko Sadaoka,et al.  Humidity sensors based on polymer thin films , 1996 .

[20]  Anil V. Virkar,et al.  Theoretical analysis of the role of interfaces in transport through oxygen ion and electron conducting membranes , 2005 .

[21]  Lin He,et al.  Surface passivation using oligo(ethylene glycol) in ATRP-assisted DNA detection , 2008 .

[22]  A. Virkar,et al.  Instability of BaCeO3 in H2O-containing atmospheres , 1996 .

[23]  H. Iwahara,et al.  Protonic conduction in Zr-substituted BaCeO3 , 2000 .

[24]  A. K. Verma,et al.  Temperature dependence of thermophysical properties of GaAs/AlAs periodic structure , 1995 .

[25]  S. Akbar,et al.  Microporous zeolite modified yttria stabilized zirconia (YSZ) sensors for nitric oxide (NO) determination in harsh environments , 2002 .