A thermodynamic comparison of solid oxide fuel cell-combined cycles

Abstract Solid oxide fuel cell (SOFC) technology offers a clean and efficient way to generate electricity from natural gas. Since various integration options with thermal cycles have been proposed to achieve even higher electrical efficiencies, it is interesting to see how these compare. In addition, the influence of the SOFC operating parameters on thermal cycles is not yet adequately addressed. In this study, a stand-alone SOFC system is thermodynamically analysed and compared to configurations combined with a gas turbine or steam turbine, as well as a novel SOFC-reciprocating engine combined cycle system. The results are mapped in contour plots for the entire SOFC operating envelope, revealing the influence of fuel utilisation, cell voltage, average stack temperature and gas turbine pressure ratio on different combined cycles. An exergy analysis is included to quantify notable losses in the systems and identify potential further improvements. The pressurised SOFC-gas turbine combined cycle achieves the highest electrical efficiencies for stack operation at moderate cell voltages and high temperatures, while the steam turbine combined cycle is more efficient at high cell voltages and low stack temperatures. The SOFC-reciprocating engine combined cycle shows similar behaviour to the steam turbine combined cycle, but achieves slightly lower efficiencies.

[1]  Donato Aquaro,et al.  High temperature heat exchangers for power plants : Performance of advanced metallic recuperators , 2007 .

[2]  Romano Borchiellini,et al.  Thermoeconomic analysis of large solid oxide fuel cell plants: Atmospheric vs. pressurized performance , 2013 .

[3]  Young Duk Lee,et al.  Performance analysis of an SOFC/HCCI engine hybrid system: System simulation and thermo-economic comparison , 2014 .

[4]  H. Struchtrup.  Thermodynamics of Fuel Cells , 2014 .

[5]  R. Peters,et al.  Internal reforming of methane in solid oxide fuel cell systems , 2002 .

[6]  Aristide F. Massardo,et al.  Design and part-load performance of a hybrid system based on a solid oxide fuel cell reactor and a micro gas turbine , 2001 .

[7]  Francesco Calise,et al.  Hybrid solid oxide fuel cells–gas turbine systems for combined heat and power: A review , 2015 .

[8]  Jack Brouwer,et al.  Control design of an atmospheric solid oxide fuel cell/gas turbine hybrid system: Variable versus fixed speed gas turbine operation , 2006 .

[9]  Josef Kallo,et al.  Influence of Pressurisation on SOFC Performance and Durability: A Theoretical Study , 2011 .

[10]  Tsutomu Kawabata,et al.  Smart Fuel Cell Demonstration Project: A Challenge to Realize SOFC-Powered Campus , 2015 .

[11]  Ludger Blum,et al.  Analysis of a Solid Oxide Fuel Cell System with Low Temperature Anode Off-Gas Recirculation , 2015 .

[12]  S. Rahmstorf,et al.  Why the right climate target was agreed in Paris , 2016 .

[13]  Stefano Campanari,et al.  Full Load and Part-Load Performance Prediction for Integrated SOFC and Microturbine Systems , 1999 .

[14]  Ludger Blum,et al.  Analysis of solid oxide fuel cell system concepts with anode recycling , 2013 .

[15]  Francesco Calise,et al.  Simulation and exergy analysis of a hybrid Solid Oxide Fuel Cell (SOFC)–Gas Turbine System , 2006 .

[16]  G Benvenuto,et al.  Simulation and performance comparison between diesel and natural gas engines for marine applications , 2017 .

[17]  Xin-jian Zhu,et al.  Two-dimensional dynamic simulation of a direct internal reforming solid oxide fuel cell , 2007 .

[18]  B. Maribo-Mogensen,et al.  Internal Steam Reforming in Solid Oxide Fuel Cells , 2008 .

[19]  H. Ho,et al.  Multi-level modeling of SOFC–gas turbine hybrid system , 2003 .

[20]  L. A. Chick,et al.  Demonstration of a highly efficient solid oxide fuel cell power system using adiabatic steam reforming and anode gas recirculation , 2012 .

[21]  Aristide F. Massardo,et al.  Internal Reforming Solid Oxide Fuel Cell-Gas Turbine Combined Cycles (IRSOFC-GT): Part A— Cell Model and Cycle Thermodynamic Analysis , 1998 .

[22]  Tong Seop Kim,et al.  Comparison between pressurized design and ambient pressure design of hybrid solid oxide fuel cell–gas turbine systems , 2006 .

[23]  Paola Costamagna,et al.  Electrochemical model of the integrated planar solid oxide fuel cell (IP-SOFC) , 2004 .

[24]  M. Halinen.  Improving the performance of solid oxide fuel cell systems , 2015 .

[25]  C. Adjiman,et al.  Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance , 2004 .

[26]  Poul Erik Morthorst,et al.  Renewable energy policies in Europe: Converging or diverging? , 2012 .

[27]  Kas Hemmes,et al.  The Thermodynamic Evaluation and Optimization of Fuel Cell Systems , 2006 .

[28]  R. Stobart,et al.  Investigation of Optimum Operating Range for a Solid Oxide Fuel Cell-IC Engine Hybrid System , 2006, 2006 IEEE Conference on Electric and Hybrid Vehicles.

[29]  J. Brouwer,et al.  Fuel flexibility study of an integrated 25 kW SOFC reformer system , 2005 .

[30]  Markus Feigl,et al.  Field Test Validation of the DLN2.5H Combustion System on the 9H Gas Turbine at Baglan Bay Power Station , 2005 .

[31]  Ulrich Stimming,et al.  Optimization of a 200 kW SOFC cogeneration power plant. Part II: variation of the flowsheet , 1998 .

[32]  S. Harvey,et al.  Gas Turbine Cycles With Solid Oxide Fuel Cells—Part I: Improved Gas Turbine Power Plant Efficiency by Use of Recycled Exhaust Gases and Fuel Cell Technology , 1994 .

[33]  Kenichi Wada,et al.  The role of renewable energy in climate stabilization: results from the EMF27 scenarios , 2014, Climatic Change.

[34]  M. Laguna-Bercero.  Recent advances in high temperature electrolysis using solid oxide fuel cells: A review , 2012 .

[35]  Ernst Riensche,et al.  Pre-reforming of natural gas in solid oxide fuel-cell systems , 1998 .

[36]  Vasilis Fthenakis,et al.  Energy policy and financing options to achieve solar energy grid penetration targets: Accounting for external costs , 2014 .

[37]  Paolo Chiesa,et al.  Predicting the ultimate potential of natural gas SOFC power cycles with CO2 capture – Part A : Methodology and reference cases , 2016 .

[38]  Zuo-hua Huang,et al.  Experimental study on combustion characteristics of a spark-ignition engine fueled with natural gas–hydrogen blends combining with EGR , 2009 .

[39]  Chen Yang,et al.  Synthesis/design optimization of SOFC-PEM hybrid system under uncertainty , 2015 .

[40]  Jonathan Love,et al.  Generating Electricity at 60% Electrical Efficiency from 1 - 2 kWe SOFC Products , 2009 .

[41]  Masoud Rokni,et al.  Thermodynamic analysis of an integrated solid oxide fuel cell cycle with a rankine cycle , 2010 .

[42]  Melissa M. Bilec,et al.  Exergy and economic comparison between kW-scale hybrid and stand-alone solid oxide fuel cell systems , 2017 .

[43]  Masoud Rokni,et al.  Thermodynamic analysis of SOFC (solid oxide fuel cell)–Stirling hybrid plants using alternative fuels , 2013 .

[44]  S. Jensen,et al.  Eliminating degradation in solid oxide electrochemical cells by reversible operation. , 2015, Nature Materials.

[45]  Paolo Iora,et al.  Simulation of Intermediate-Temperature SOFC for 60%+ Efficiency Distributed Generation , 2015 .

[46]  G. Naterer,et al.  Thermodynamic modeling of a gas turbine cycle combined with a solid oxide fuel cell , 2008 .

[47]  Florian Steinke,et al.  Parametric study of variable renewable energy integration in Europe: Advantages and costs of transmission grid extensions , 2012 .