The application of fretting wear modelling to a spline coupling

The prediction of fretting wear is a significant issue for the design of high-performance aeroengine spline couplings, due to the potential for slip between the highly loaded spline teeth under cyclic loads. The work reported here aims to demonstrate the feasibility and difficulties of applying a finite element based fretting wear simulation tool, which incrementally updates the contact geometry with material removal, to this problem. The method calculates the local wear that is the wear at each contact node, as a function of local contact pressure and local slip. It is calibrated using wear coefficient data from round-on-flat tests under representative loading conditions. The method has been previously validated against round-on-flat fretting test results for a range of contact loads. The problems of applying the simulation tool to the complex geometry of a helical spline coupling are discussed. The predictions are compared with results from fatigue tests on a reduced scale aeroengine type spline coupling and a previous approach to wear prediction which did not incorporate the evolving contact geometry.

[1]  A. Tjernberg.  Load distribution in the axial direction in a spline coupling , 2001 .

[2]  I. R. McColl,et al.  Finite element simulation and experimental validation of fretting wear , 2004 .

[3]  Staffan Söderberg,et al.  On fretting maps , 1988 .

[4]  T. Farris,et al.  Wear in Partial Slip Contact , 2001 .

[5]  L. Johansson,et al.  Numerical Simulation of Contact Pressure Evolution in Fretting , 1994 .

[6]  Sean B. Leen,et al.  Fatigue life prediction for a barrelled spline coupling under torque overload , 2003 .

[7]  D. A. Hills,et al.  A combined testing and modelling approach to the prediction of the fretting fatigue performance of splined shafts , 2001 .

[8]  Sean B. Leen,et al.  The effect of slip regime on fretting wear-induced stress evolution , 2004 .

[9]  A. Tjernberg.  Load distribution and pitch errors in a spline coupling , 2001 .

[10]  M. Godet.  The third-body approach: A mechanical view of wear , 1984 .

[11]  Sean B. Leen,et al.  Measurement, analysis and prediction of fretting wear damage in a representative aeroengine spline coupling , 2004 .

[12]  J. Warburton,et al.  The unlubricated fretting wear of mild steel in air , 1985 .

[13]  Thomas H. Hyde,et al.  An investigation of the fatigue and fretting performance of a representative aero-engine spline coupling , 2002 .

[14]  Sean B. Leen,et al.  A simplified fretting test methodology for complex shaft couplings , 2005 .

[15]  P. L. Hurricks.  The mechanism of fretting — A review , 1970 .

[16]  Y. Berthier,et al.  Velocity accommodation in fretting , 1988 .

[17]  P. M. Ku,et al.  Spline Wear-Effects of Design and Lubrication , 1975 .

[18]  Andrew V. Olver,et al.  Regimes of Contact in Spline Couplings , 2002 .

[19]  J. Archard.  Contact and Rubbing of Flat Surfaces , 1953 .

[20]  Yves Berthier,et al.  Testing Methods in Fretting Fatigue: A Critical Appraisal , 1992 .

[21]  B. P. Volfson.  Stress Sources and Critical Stress Combinations for Splined Shaft , 1982 .

[22]  Sean B. Leen,et al.  Macroscopic fretting variables in a splined coupling under combined torque and axial load , 2001 .