Tree crown segmentation based on a geometric tree crown model for prediction of forest variables

A new algorithm for tree crown segmentation from airborne laser scanning data was validated at a test site in southern Sweden (lat. 58° N, long. 13° E). The tree crown segmentation algorithm used a correlation surface created by fitting a geometric tree crown model and was also controlled using an a priori probability function. If the model fit alone was used, 69% of the field-measured trees were detected but when a priori information was used, the proportion of detected trees increased to 75%. The proportion of detected trees represented 95% of the total stem volume for all field measured living trees. The tree crown segments, with zero, one, or several trees, were used as input to an imputation algorithm for prediction of forest variables, which yielded relative root mean square errors of 8.9% for stem volume, 7.2% for basal area, 3.8% for mean tree height, 6.3% for mean stem diameter, and 15% for stem density, after aggregation to plot level for cross-validation. Thus, automatic tree crown delineation using the segmentation algorithm could be used for imputation of tree stems to obtain high accuracy predictions of several forest variables.

[1]  J. Hyyppä,et al.  Review of methods of small‐footprint airborne laser scanning for extracting forest inventory data in boreal forests , 2008 .

[2]  Eric C. Turnblom,et al.  Tree Species Detection Accuracies Using Discrete Point Lidar and Airborne Waveform Lidar , 2012, Remote. Sens..

[3]  Juha M. Hyyppae,et al.  Assessment of forest attributes and single-tree segmentation by means of laser scanning , 2000, Defense, Security, and Sensing.

[4]  J. Holmgren,et al.  Prediction of Stem Attributes by Combining Airborne Laser Scanning and Measurements from Harvesters , 2012 .

[5]  E. Næsset,et al.  Single Tree Segmentation Using Airborne Laser Scanner Data in a Structurally Heterogeneous Spruce Forest , 2006 .

[6]  N. Coops,et al.  Canopy surface reconstruction from a LiDAR point cloud using Hough transform , 2010 .

[7]  E. Næsset.  Airborne laser scanning as a method in operational forest inventory: Status of accuracy assessments accomplished in Scandinavia , 2007 .

[8]  E. Næsset,et al.  Prediction of species specific forest inventory attributes using a nonparametric semi-individual tree crown approach based on fused airborne laser scanning and multispectral data , 2010 .

[9]  Mikko Inkinen,et al.  A segmentation-based method to retrieve stem volume estimates from 3-D tree height models produced by laser scanners , 2001, IEEE Trans. Geosci. Remote. Sens..

[10]  J. Reitberger,et al.  3D segmentation of single trees exploiting full waveform LIDAR data , 2009 .

[11]  Liviu Theodor Ene,et al.  Comparative testing of single-tree detection algorithms under different types of forest , 2011 .

[12]  Johan Holmgren,et al.  A method for linking field-surveyed and aerial-detected single trees using cross correlation of position images and the optimization of weighted tree list graphs. , 2008 .

[13]  K. Itten,et al.  LIDAR-based geometric reconstruction of boreal type forest stands at single tree level for forest and wildland fire management , 2004 .

[14]  B. Koch,et al.  A Lidar Point Cloud Based Procedure for Vertical Canopy Structure Analysis And 3D Single Tree Modelling in Forest , 2008, Sensors.

[15]  Robert J. Woodham,et al.  The automatic recognition of individual trees in aerial images of forests based on a synthetic tree crown image model , 1996 .

[16]  J. Holmgren,et al.  Estimation of tree lists from airborne laser scanning by combining single-tree and area-based methods , 2010 .

[17]  P. Gessler,et al.  Automated estimation of individual conifer tree height and crown diameter via two-dimensional spatial wavelet analysis of lidar data , 2006 .

[18]  Barbara Koch,et al.  TREE SPECIES DETECTION USING FULL WAVEFORM LIDAR DATA IN A COMPLEX FOREST , 2010 .

[19]  Albert R. Stage,et al.  Most Similar Neighbor: An Improved Sampling Inference Procedure for Natural Resource Planning , 1995, Forest Science.

[20]  Felix Morsdorf,et al.  CLUSTERING IN AIRBORNE LASER SCANNING RAW DATA FOR SEGMENTATION OF SINGLE TREES , 2003 .

[21]  Juha Hyyppä,et al.  An International Comparison of Individual Tree Detection and Extraction Using Airborne Laser Scanning , 2012, Remote. Sens..

[22]  B. Koch,et al.  Detection of individual tree crowns in airborne lidar data , 2006 .

[23]  Barbara Koch,et al.  Prior-knowledge-based single-tree extraction , 2011 .

[24]  Peter Axelsson,et al.  Processing of laser scanner data-algorithms and applications , 1999 .

[25]  Randolph H. Wynne,et al.  Estimating plot-level tree heights with lidar : local filtering with a canopy-height based variable window size , 2002 .

[26]  Thomas E. Burk,et al.  Goodness-of-Fit Tests and Model Selection Procedures for Diameter Distribution Models , 1988, Forest Science.

[27]  Ljusk Ola Eriksson,et al.  The Heureka Forestry Decision Support System: An Overview , 2011, Math. Comput. For. Nat. Resour. Sci..

[28]  Barbara Koch,et al.  FIRST EXPERIENCE IN THE APPLICATION OF LASERSCANNER DATA FOR THE ASSESSMENT OF VERTICAL AND HORIZONTAL FOREST STRUCTURES , 2000 .

[29]  Åsa Persson,et al.  Detecting and measuring individual trees using an airborne laser scanner , 2002 .

[30]  M. Maltamo,et al.  ADAPTIVE METHODS FOR INDIVIDUAL TREE DETECTION ON AIRBORNE LASER BASED CANOPY HEIGHT MODEL , 2004 .

[31]  Nicholas L. Crookston,et al.  yaImpute: An R Package for kNN Imputation , 2008 .

[32]  J. Hyyppä,et al.  DETECTING AND ESTIMATING ATTRIBUTES FOR SINGLE TREES USING LASER SCANNER , 2006 .