Investigation of damage mechanisms in self-reinforced polyethylene composites by acoustic emission

Abstract The objective of this study is to investigate the damage mechanisms in self-reinforced polyethylene composite laminates (UHMWPE/HDPE) under monotonic tensile loading by the acoustic emission (AE) technique. Fracture surface examinations were conducted using a scanning electron microscope (SEM). Using model specimens exhibiting a dominant failure mechanism, correlations were established between the observed damage growth mechanisms and the AE results in terms of the events amplitude. These correlations can be used to monitor the damage growth process in the UHMWPE/HDPE composite laminates exhibiting multiple modes of damage. Results from this study revealed that the AE technique is a viable and effective tool for identifying damage mechanisms such as fiber–matrix debonding, matrix cracking, fiber pull-out, fiber breakage and delamination in the UHMWPE/HDPE composite materials.

[1]  Characterization of interfacial properties of composite materials by acoustic emission , 2000 .

[2]  Y. Cohen,et al.  A novel composite based on ultra-high-molecular-weight polyethylene , 1997 .

[3]  T. Kurauchi,et al.  Fracture mechanism of unidirectional carbon-fibre reinforced epoxy resin composite , 1986 .

[4]  T. Ogawa,et al.  Mechanical properties of ultrahigh‐molecular‐weight polyethylene fiber‐reinforced PE composites , 1998 .

[5]  M. Benzeggagh,et al.  On the use of acoustic emission to investigate damage mechanisms in glass-fibre-reinforced polypropylene , 1994 .

[6]  R. Gaertner,et al.  Use of acoustic emission to identify damage modes in glass fibre reinforced polyester , 2002 .

[7]  Maciej Kumosa,et al.  Acoustic emission from stress corrosion cracks in aligned GRP , 1987 .

[8]  J. Arinez,et al.  Manufacture and properties of a polyethylene homocomposite , 1998 .

[9]  Peter J. de Groot,et al.  Real-time frequency determination of acoustic emission for different fracture mechanisms in carbon/epoxy composites , 1995 .

[10]  J. Karger‐Kocsis,et al.  An acoustic emission study of the temperature-dependent fracture behavior of polypropylene composites reinforced by continuous and discontinuous fiber mats , 2000 .

[11]  Henry A. Scarton,et al.  Variations in Acoustic Emission Between Graphite- and Glass-Epoxy Composites , 1981 .

[12]  B. Lauke,et al.  Acoustic emission of debonding between fibre and matrix to evaluate local adhesion , 2003 .

[13]  Leif A. Carlsson,et al.  Acoustic emission from graphite/epoxy composite laminates with special reference to delamination , 1983 .

[14]  J. Karger‐Kocsis,et al.  Comparison of the fracture and failure behavior of polypropylene composites reinforced by long glass fibers and by glass mats , 1995 .

[15]  E. V. K. Hill,et al.  Longitudinal splitting and fiber breakage characterization in graphite epoxy using acoustic emission data , 1995 .

[16]  Y. Nasu,et al.  Formation of adhesive phase onto high strength and modulus PE fiber by PE solution treatment for making PE fiber-reinforced PE composite , 2002 .

[17]  Laser cladding and inspection for life extension of turbine blades , 1995 .

[18]  J. Rhazi,et al.  Different Types of Amplitude Distributions in Composite Materials , 1988 .

[19]  M. Bousmina,et al.  Effect of Surface Treatment on Mechanical Properties of Polyethylene Composite , 2002 .

[20]  W. H. Prosser,et al.  Monitoring Damage Growth in Titanium Matrix Composites Using Acoustic Emission , 1994 .