A MEMS-Reconfigurable Power Divider on High Resistivity Silicon Substrate

This paper presents a MEMS-reconfigurable power divider on high resistivity silicon substrate with variable power ratio. The circuit is based on two cascaded hybrid couplers connected through a tunable phase shifter that produces the required power ratio. A 5 state prototype has been fabricated on a 525 m high resistivity silicon substrate employing two 3 dB branch line couplers and a reflection-line MEMS phase shifter. The latter is reconfigured through two MEMS-switched open ended lines, whose lengths can be varied through the actuation of eight ohmic contact MEMS switches. Measurements of the MEMS switch show an isolation and an insertion loss better than 15 dB and 0.2 dB, respectively, with a contact resistance lower than 1 Ohm in the entire power divider bandwidth. RF measurements of the power divider exhibit a return loss better than 16 dB and an isolation better than 17 dB in the bandwidth [11.8-12.2] GHz with nominal power ratios of 1:0, 6:1,1:1,1:6, and 0:1.

[1]  J Ho,et al.  Wilkinson-divider design provides reduced size , 1997 .

[2]  A. Dec,et al.  Micromachined electro-mechanically tunable capacitors and their applications to RF IC's , 1998 .

[3]  Ruey-Beei Wu,et al.  A wide-band multiport planar power-divider design using matched sectorial components in radial arrangement , 1998 .

[4]  S. N. Prasad,et al.  Non-reflecting electronically variable attenuator , 1999, 1999 SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference.

[5]  Jun Zou,et al.  Development of a wide-tuning-range two-parallel-plate tunable capacitor for integrated wireless communication systems , 2001 .

[6]  Youngwoo Kwon,et al.  A compact V-band 2-bit reflection-type MEMS phase shifter , 2002, IEEE Microwave and Wireless Components Letters.

[7]  Gabriel M. Rebeiz,et al.  High-Q millimeter-wave MEMS varactors: extended tuning range and discrete-position designs , 2002, 2002 IEEE MTT-S International Microwave Symposium Digest (Cat. No.02CH37278).

[8]  Gabriel M. Rebeiz RF MEMS: Theory, Design and Technology , 2003 .

[9]  P. Russer,et al.  RF-MEMS SPDT switch on silicon substrate for space applications , 2004, Digest of Papers. 2004 Topical Meeting onSilicon Monolithic Integrated Circuits in RF Systems, 2004..

[10]  J. Bouchaud,et al.  RF MEMS: status of the industry and roadmaps , 2005, 2005 IEEE Radio Frequency integrated Circuits (RFIC) Symposium - Digest of Papers.

[11]  R. Sorrentino,et al.  A MEMS programmable power divider/combiner for reconfigurable antenna systems , 2005, 2005 European Microwave Conference.

[12]  R. Sorrentino,et al.  Innovative Dual Band Reconfigurable Beam Forming Network for Conformal Arrays , 2006, 2006 European Microwave Conference.