Synthesis of Molecularly Imprinted Polymer Nanoparticles for Removal of Sudan III Dye

Molecularly imprinted polymer (MIP) nanoparticles of Sudan III dye as template were synthesized by using non-covalent approach. The molecularly imprinted polymers were synthesized in a microemulsion contained Sudan III as a template, acrylic acid (AA) as a monomer, 1,4-butanediol dimethacrylate as a cross-linker and 2,2-azo-bisisobutyronitrile (AIBN) as an initiator. The synthesized beads were characterized by TEM and FTIR. The TEM results revealed the nanosize beads of polymers were produced. The efficiency of imprinted and non-imprinted polymers was evaluated by batch binding studies. The results showed that the MIP 3 (0.1: 6: 10, Sudan III: AA: 1,4-butanediol dimethacrylate) was best among all polymers with highest rebinding efficiency. The removal efficiency of selected MIP 3 in the spiked Sudan III dye river water sample was about 80%. This study was conducted to produce nanosized molecularly imprinted polymers by using microemulsion polymerization technique.

[1]  R. Ullah,et al.  Selective Removal of the Emerging Dye Basic Blue 3 via Molecularly Imprinting Technique , 2022, Molecules.

[2]  M. Ibrahim,et al.  Synthesis of molecularly imprinted polymer for removal of Congo red , 2020, BMC Chemistry.

[3]  S. Bhawani,et al.  Template Assisted Synthesis of Molecularly Imprinted Polymer for the Extraction of p-Coumaric Acid , 2020 .

[4]  M. Ibrahim,et al.  Synthesis, characterization, and application of molecular imprinting polymer for extraction of melamine from spiked milk, water, and blood serum , 2020, Journal of Liquid Chromatography & Related Technologies.

[5]  S. Bhawani,et al.  Synthesis of Molecularly Imprinted Polymers for the Selective Extraction /Removal of 2,4,6-trichlorophenol , 2019 .

[6]  S. Bhawani,et al.  Synthesis and characterization of molecular imprinting polymer for the removal of 2-phenylphenol from spiked blood serum and river water , 2019, Chemical and Biological Technologies in Agriculture.

[7]  Shuang Liang,et al.  Molecularly imprinted solid-phase extraction method for the gas chromatographic analysis of organochlorine fungicides in ginseng. , 2019, Journal of separation science.

[8]  Mei Wang,et al.  Adsorption of methylene blue from aqueous solution onto viscose-based activated carbon fiber felts: Kinetics and equilibrium studies , 2019, Adsorption Science & Technology.

[9]  S. Bhawani,et al.  Synthesis of molecular imprinting polymers for extraction of gallic acid from urine , 2018, Chemistry Central Journal.

[10]  Liping Wang,et al.  Molecularly Imprinted Polymers for Selective Extraction of Oblongifolin C from Garcinia yunnanensis Hu , 2017, Molecules.

[11]  M. Aliaga,et al.  Determination of Sudan I in drinks containing Sunset yellow by adsorptive stripping voltammetry. , 2016, Food chemistry.

[12]  S. Bhawani,et al.  Synthesis and Characterization of Molecular Imprinting Polymer Microspheres of Piperine: Extraction of Piperine from Spiked Urine , 2016, Journal of analytical methods in chemistry.

[13]  S. Bhawani,et al.  Synthesis and Characterization of Molecular Imprinting Polymer Microspheres of Cinnamic Acid: Extraction of Cinnamic Acid from Spiked Blood Plasma , 2016 .

[14]  H. Matsunaga,et al.  Molecularly imprinted polymer for caffeic acid by precipitation polymerization and its application to extraction of caffeic acid and chlorogenic acid from Eucommia ulmodies leaves. , 2016, Journal of pharmaceutical and biomedical analysis.

[15]  A. Asghari,et al.  In-line micro-matrix solid-phase dispersion extraction for simultaneous separation and extraction of Sudan dyes in different spices. , 2015, Journal of chromatography. A.

[16]  Xiaonan Lu,et al.  Determination of Sudan I in paprika powder by molecularly imprinted polymers-thin layer chromatography-surface enhanced Raman spectroscopic biosensor. , 2015, Talanta.

[17]  Xiaoyu Xie,et al.  Synthesis of magnetic molecularly imprinted polymers by reversible addition fragmentation chain transfer strategy and its application in the Sudan dyes residue analysis. , 2015, Journal of chromatography. A.

[18]  A. Malakahmad,et al.  Removal of methylene blue from dye effluent using ageratum conyzoide leaf powder (ACLP) , 2015 .

[19]  Ligang Chen,et al.  Removal of sudan dyes from aqueous solution by magnetic carbon nanotubes: Equilibrium, kinetic and thermodynamic studies , 2015 .

[20]  N. Muhammad,et al.  Potential Biosorbent Derived from Calligonum polygonoides for Removal of Methylene Blue Dye from Aqueous Solution , 2015, TheScientificWorldJournal.

[21]  H. A. Panahi,et al.  Selective extraction of clonazepam from human plasma and urine samples by molecularly imprinted polymeric beads. , 2014, Journal of separation science.

[22]  Nor Azah Yusof,et al.  Preparation and Characterization of Molecularly Imprinted Polymer as SPE Sorbent for Melamine Isolation , 2013 .

[23]  Teresa M. Fonovich.  Sudan dyes: are they dangerous for human health? , 2013, Drug and chemical toxicology.

[24]  Faiz Ali,et al.  Molecular imprinted polymers for separation science: a review of reviews. , 2013, Journal of separation science.

[25]  Ligang Chen,et al.  Separation of Sudan dyes from chilli powder by magnetic molecularly imprinted polymer. , 2012, Journal of chromatography. A.

[26]  Ji-ti Zhou,et al.  Removal of water-insoluble Sudan dyes by Shewanella oneidensis MR-1. , 2012, Bioresource technology.

[27]  S. Piletsky,et al.  Rational design of molecularly imprinted polymer: the choice of cross-linker. , 2012, The Analyst.

[28]  Sevil Aksu,et al.  An alternative source of adsorbent for the removal of dyes from textile waters: Posidonia oceanica (L.) , 2012 .

[29]  Hongyuan Yan,et al.  Molecularly imprinted solid-phase extraction coupled to liquid chromatography for determination of Sudan dyes in preserved beancurds. , 2012, Food chemistry.

[30]  Zhixiang Xu,et al.  Preparation and Characterization of a Novel Surface Molecularly Imprinted Polymer for Selective Recognition of Sudan III , 2012 .

[31]  Feng-xia Qiao,et al.  Molecularly imprinted microspheres as SPE sorbent for selective extraction of four Sudan dyes in catsup products. , 2011, Journal of chromatography. B, Analytical technologies in the biomedical and life sciences.

[32]  Giuseppe Vasapollo,et al.  Molecularly Imprinted Polymers: Present and Future Prospective , 2011, International journal of molecular sciences.

[33]  Yong-Jun Zhang,et al.  Selective removal of diclofenac from contaminated water using molecularly imprinted polymer microspheres. , 2011, Environmental pollution.

[34]  Hongyuan Yan,et al.  Molecularly imprinted matrix solid-phase dispersion combined with dispersive liquid-liquid microextraction for the determination of four Sudan dyes in egg yolk. , 2011, Journal of chromatography. A.

[35]  Á. Ríos,et al.  Determination of sudan dyes in food samples using supercritical fluid extraction–capillary liquid chromatography , 2011 .

[36]  K. Y. Foo,et al.  Insights into the modeling of adsorption isotherm systems , 2010 .

[37]  G. Viscardi,et al.  Determination of banned Sudan dyes in food samples by molecularly imprinted solid phase extraction-high performance liquid chromatography. , 2009, Journal of separation science.

[38]  A. O. Ashogbon,et al.  Studies on castor seed shell as a sorbent in basic dye contaminated wastewater remediation , 2008 .

[39]  Kyung Ho Row,et al.  Characteristic and synthetic approach of molecularly imprinted polymer , 2006 .

[40]  P. Cornel,et al.  Biosorption of dyes using dead macro fungi: effect of dye structure, ionic strength and pH. , 2006, Bioresource technology.