Wear behavior of alumina abrasive belt and its effect on surface integrity of titanium alloy during conventional and creep-feed grinding

[1]  Y. Geng,et al.  Molecular dynamics simulation of laser assisted grinding of GaN crystals , 2022, International Journal of Mechanical Sciences.

[2]  Guijian Xiao,et al.  Wear evolution of electroplated diamond abrasive belt and corresponding surface integrity of Inconel 718 during grinding , 2022, Tribology International.

[3]  Guijian Xiao,et al.  A new one-step approach for the fabrication of microgrooves on Inconel 718 surface with microporous structure and nanoparticles having ultrahigh adhesion and anisotropic wettability: Laser belt processing , 2022, Applied Surface Science.

[4]  Guijian Xiao,et al.  A novel low-damage and low-abrasive wear processing method of Cf/SiC ceramic matrix composites: Laser-induced ablation-assisted grinding , 2022, Journal of Materials Processing Technology.

[5]  Guijian Xiao,et al.  Tip vortex cavitation of propeller bionic noise reduction surface based on precision abrasive belt grinding , 2022, Journal of Advanced Manufacturing Science and Technology.

[6]  Guijian Xiao,et al.  Material removal behavior of Cf/SiC ceramic matrix composites as a function of abrasive wear during diamond abrasive belt grinding , 2021, Wear.

[7]  Guijian Xiao,et al.  Analysis of abrasive belt wear effect on residual stress distribution on a grinding surface , 2021, Wear.

[8]  Yucan Fu,et al.  Coolant condition and spindle power in high-efficiency-deep-grinding of nickel-based superalloy profile part , 2021, Materials and Manufacturing Processes.

[9]  He Zhe,et al.  Investigation of conditions leading to critical transitions between abrasive belt wear modes for rail grinding , 2021 .

[10]  W. Ding,et al.  Fretting wear behaviour of machined layer of nickel-based superalloy produced by creep-feed profile grinding , 2021, Chinese Journal of Aeronautics.

[11]  Guijian Xiao,et al.  Fatigue Life Analysis of Aero-engine Blades for Abrasive Belt Grinding Considering Residual Stress , 2021, Engineering Failure Analysis.

[12]  Zhi Huang,et al.  Collision detection algorithm on abrasive belt grinding blisk based on improved octree segmentation , 2021, The International Journal of Advanced Manufacturing Technology.

[13]  Jiu-hua Xu,et al.  Creep feed grinding induced gradient microstructures in the superficial layer of turbine blade root of single crystal nickel-based superalloy , 2021, International Journal of Extreme Manufacturing.

[14]  Ze Chai,et al.  A study of dynamic energy partition in belt grinding based on grinding effects and temperature dependent mechanical properties , 2021 .

[15]  Guijian Xiao,et al.  A measurement method of the belt grinding allowance of hollow blades based on blue light scanning , 2021, The International Journal of Advanced Manufacturing Technology.

[16]  Y. Liu,et al.  The Method and Experiment Research on Down-stroke Abrasive Belt Grinding under Micro Feeding for Noise Reduction Surface , 2021, Journal of Bionic Engineering.

[17]  Guijian Xiao,et al.  A multi-particle abrasive model for investigation of residual stress in belt grinding of titanium alloys , 2021, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.

[18]  Chunya Wu,et al.  Wear characteristics of small ball-end fine diamond grinding pins dressed by on-machine electrical discharge , 2021, Wear.

[19]  T. Beno,et al.  Surface integrity investigations for prediction of fatigue properties after machining of alloy 718 , 2021 .

[20]  M. Jackson,et al.  Creep-Feed Grinding Wheel Development for Safely Grinding Aerospace Alloys , 2021, Journal of Materials Engineering and Performance.

[21]  Guijian Xiao,et al.  Comprehensive investigation into the effects of relative grinding direction on abrasive belt grinding process , 2021 .

[22]  Cezhi Du,et al.  Surface quality and residual stress variation of ceramics after abrasive grinding under pre-compressive stress , 2021 .

[23]  T. Chen,et al.  Surface burn behavior in creep-feed deep grinding of gamma titanium aluminide intermetallics: characterization, mechanism, and effects , 2021, The International Journal of Advanced Manufacturing Technology.

[24]  Jiu-hua Xu,et al.  Alumina abrasive wheel wear in ultrasonic vibration-assisted creep-feed grinding of Inconel 718 nickel-based superalloy , 2021 .

[25]  S. Paul,et al.  Wear mechanism in high-speed superabrasive grinding of titanium alloy and its effect on surface integrity , 2020 .

[26]  Yun Huang,et al.  Investigation on secondary self-sharpness performance of hollow-sphere abrasive grains in belt grinding of titanium alloy , 2020 .

[27]  Guijian Xiao,et al.  Optimization of belt grinding stepover for biomimetic micro-riblets surface on titanium alloy blades , 2020, The International Journal of Advanced Manufacturing Technology.

[28]  Qi-yue Liu,et al.  Effects of abrasive material and hardness of grinding wheel on rail grinding behaviors , 2020, Wear.

[29]  Steven Y. Liang,et al.  Effect of phase transition on micro-grinding-induced residual stress , 2020 .

[30]  Wenxi Wang,et al.  Experimental and simulation research on residual stress for abrasive belt rail grinding , 2020, The International Journal of Advanced Manufacturing Technology.

[31]  Yun Huang,et al.  Investigation of robotic abrasive belt grinding methods used for precision machining of aluminum blades , 2020 .

[32]  W. Ding,et al.  An investigation on machined surface quality and tool wear during creep feed grinding of powder metallurgy nickel-based superalloy FGH96 with alumina abrasive wheels , 2020 .

[33]  Minhao Zhu,et al.  Probing the effect of abrasive grit size on rail grinding behaviors , 2020 .

[34]  Wen-jian Wang,et al.  Experimental investigation on material removal mechanism during rail grinding at different forward speeds , 2020, Tribology International.

[35]  P. Mallet,et al.  Numerical evaluation of surface welding residual stress behavior under multiaxial mechanical loading and experimental validations , 2020 .

[36]  Z. Yue,et al.  Effect mechanism and equivalent model of surface roughness on fatigue behavior of nickel-based single crystal superalloy , 2019, International Journal of Fatigue.

[37]  Jiu-hua Xu,et al.  Comparative investigation on wear behavior of brown alumina and microcrystalline alumina abrasive wheels during creep feed grinding of different nickel-based superalloys , 2019, Wear.

[38]  Steven Y. Liang,et al.  High-speed grinding of HIP-SiC ceramics on transformation of microscopic features , 2019, The International Journal of Advanced Manufacturing Technology.

[39]  S. Paul,et al.  Effect of different grinding fluids applied in minimum quantity cooling-lubrication mode on surface integrity in cBN grinding of Inconel 718 , 2018, Journal of Manufacturing Processes.

[40]  Yidu Zhang,et al.  Investigation on influences of initial residual stress on thin-walled part machining deformation based on a semi-analytical model , 2018, Journal of Materials Processing Technology.

[41]  J. Rech,et al.  Investigating adhesion wear on belt and its effects on dry belt finishing , 2018, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[42]  XiaoQi Chen,et al.  A novel sound-based belt condition monitoring method for robotic grinding using optimally pruned extreme learning machine , 2018, Journal of Materials Processing Technology.

[43]  Yulong Gu,et al.  Towards the understanding of creep-feed deep grinding of DD6 nickel-based single-crystal superalloy , 2018, The International Journal of Advanced Manufacturing Technology.

[44]  Guijian Xiao,et al.  Micro-stiffener surface characteristics with belt polishing processing for titanium alloys , 2018, The International Journal of Advanced Manufacturing Technology.

[45]  Wenfeng Ding,et al.  Grinding performance and surface integrity of particulate-reinforced titanium matrix composites in creep-feed grinding , 2018 .

[46]  Dongzhou Jia,et al.  Maximum undeformed equivalent chip thickness for ductile-brittle transition of zirconia ceramics under different lubrication conditions , 2017 .

[47]  C. Bolfarini,et al.  Prediction of the surface finishing roughness effect on the fatigue resistance of Ti-6Al-4V ELI for implants applications , 2017 .

[48]  Jun Zhao,et al.  SURFACE INTEGRITY OF HIGH-SPEED FACE MILLED Ti-6Al-4V ALLOY WITH PCD TOOLS , 2013 .

[49]  Jan-Eric Ståhl,et al.  An investigation of surface damage in the high speed turning of Inconel 718 with use of whisker reinforced ceramic tools , 2012 .

[50]  H. Zahouani,et al.  The effect of abrasive grain's wear and contact conditions on surface texture in belt finishing , 2007 .