Predicting the residual strength for environmentally degraded adhesive lap joints

[1]  Larsgunnar Nilsson,et al.  Simulating DCB, ENF and MMB experiments using shell elements and a cohesive zone model , 2004 .

[2]  I. Ashcroft,et al.  Modelling interfacial degradation using interfacial rupture elements , 2003 .

[3]  Bent F. Sørensen,et al.  Determination of cohesive laws by the J integral approach , 2003 .

[4]  Chad M. Landis,et al.  On the determination of the cohesive zone properties of an adhesive layer from the analysis of the wedge-peel test , 2003 .

[5]  N. Chandra,et al.  Analysis of crack growth and crack-tip plasticity in ductile materials using cohesive zone models , 2003 .

[6]  Larsgunnar Nilsson,et al.  Modeling of delamination using a discretized cohesive zone and damage formulation , 2002 .

[7]  R. Narasimhan,et al.  Experimental and numerical investigations of mixed mode crack growth resistance of a ductile adhesive joint , 2002 .

[8]  I. Ashcroft,et al.  The effect of moisture on the failure locus and fracture energy of an epoxy–steel interface , 2002 .

[9]  V. Tvergaard.  Resistance curves for mixed mode interface crack growth between dissimilar elastic–plastic solids , 2001 .

[10]  M. D. Thouless,et al.  Elastic–plastic mode-II fracture of adhesive joints , 2001 .

[11]  R. Narasimhan,et al.  A finite element analysis of quasistatic crack growth in a pressure sensitive constrained ductile layer , 2000 .

[12]  Werner Wagner,et al.  Delamination growth analysis in laminated structures with continuum-based 3D-shell elements and a viscoplastic softening model , 2000 .

[13]  R. H. Dodds,et al.  Simulation of ductile crack growth using computational cells: numerical aspects , 2000 .

[14]  Sunil Saigal,et al.  Polymer interfacial fracture simulations using cohesive elements , 1999 .

[15]  W. Broughton,et al.  Environmental degradation of adhesive joints: accelerated testing. , 1999 .

[16]  K. Liechti,et al.  A calibrated fracture process zone model for thin film blistering , 1998 .

[17]  Huajian Gao,et al.  Numerical simulation of crack growth in an isotropic solid with randomized internal cohesive bonds , 1998 .

[18]  Viggo Tvergaard,et al.  On the toughness of ductile adhesive joints , 1996 .

[19]  M. Xie,et al.  Energy-Based Cohesive Crack Propagation Modeling , 1995 .

[20]  J. Hutchinson,et al.  The influence of plasticity on mixed mode interface toughness , 1993 .

[21]  J. Hutchinson,et al.  The relation between crack growth resistance and fracture process parameters in elastic-plastic solids , 1992 .

[22]  M. Darby,et al.  Moisture absorption characteristics of rubber particulate filled epoxy adhesives , 1989 .

[23]  Wolfgang G. Knauss,et al.  The role of damage-softened material behavior in the fracture of composites and adhesives , 1987 .

[24]  A. Needleman.  A Continuum Model for Void Nucleation by Inclusion Debonding , 1987 .

[25]  W. W. Wright.  The effect of diffusion of water into epoxy resins and their carbon-fibre reinforced composites , 1981 .

[26]  J. Comyn,et al.  The uptake of water vapour by an epoxide adhesive formed from the diglycidyl ether of bisphenol-A and di-(1-aminopropyl-3-ethoxy) ether , 1980 .

[27]  A. Hillerborg,et al.  Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements , 1976 .

[28]  D. S. Dugdale.  Yielding of steel sheets containing slits , 1960 .

[29]  Ulf Stigh,et al.  The stress–elongation relation for an adhesive layer loaded in peel using equilibrium of energetic forces , 2004 .

[30]  J. G. Williams,et al.  The use of a cohesive zone model to study the fracture of fibre composites and adhesively-bonded joints , 2003 .

[31]  M. Wahab,et al.  Coupled stress-diffusion analysis for durability study in adhesively bonded joints , 2002 .

[32]  Erik Serrano,et al.  Glued-in rods for timber structures - a 3D model and finite element parameter studies , 2001 .

[33]  Mgd Marc Geers,et al.  Damage and crack modeling in single-edge and double-edge notched concrete beams , 2000 .

[34]  M. Cowling,et al.  Durability aspects of adhesively bonded thick adherend lap shear joints , 2000 .

[35]  A. Beevers.  Durability testing and life prediction of adhesive joints , 1999 .

[36]  A. Crocombe.  Durability modelling concepts and tools for the cohesive environmental degradation of bonded structures , 1997 .

[37]  A. Needleman.  An analysis of tensile decohesion along an interface , 1990 .

[38]  A. Gurson.  Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media , 1977 .

[39]  A. Kinloch,et al.  Environmental Failure of Structural Adhesive Joints , 1974 .

[40]  John Crank,et al.  The Mathematics Of Diffusion , 1956 .