ADHESION TECHNIQUES FOR CLIMBING ROBOTS: STATE OF THE ART AND EXPERIMENTAL CONSIDERATIONS

[1]  Giovanni Muscato,et al.  A small low-cost low-weight inspection robot with passive-type locomotion , 2004, Integr. Comput. Aided Eng..

[2]  Mark R. Cutkosky,et al.  Scaling Hard Vertical Surfaces with Compliant Microspine Arrays , 2006, Int. J. Robotics Res..

[3]  G. Muscato,et al.  A Direction Dependent Parametric Model for the Vacuum Adhesion System of the Alicia II Robot , 2006, 2006 14th Mediterranean Conference on Control and Automation.

[4]  Yanjun Shen,et al.  Proposed wall climbing robot with permanent magnetic tracks for inspecting oil tanks , 2005, IEEE International Conference Mechatronics and Automation, 2005.

[5]  Matteo Zoppi,et al.  Roboclimber versus landslides: design and realization of a heavy-duty robot for teleoperated consolidation of rocky walls , 2006, IEEE Robotics & Automation Magazine.

[6]  Kenjiro Tadakuma,et al.  Compliant Distributed Magnetic Adhesion Device for Wall Climbing , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[7]  Jian Zhu,et al.  Development of a Tracked Climbing Robot , 2002, J. Intell. Robotic Syst..

[8]  Karsten Berns,et al.  Development of a Climbing Robot System for Non-destructive Testing of Bridges , 2001 .

[9]  Kazutoshi Asano,et al.  Fundamental study of an electrostatic chuck for silicon wafer handling , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[10]  Daniela Rus,et al.  Navigating 3D steel web structures with an inchworm robot , 1996, Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems. IROS '96.

[11]  G. Muscato,et al.  Simulator for Locomotion Control of the Alicia3 Climbing Robot , 2005, CLAWAR.

[12]  Giovanni Muscato.  Soft-computing techniques for the control of walking robots , 1996 .

[13]  Tokuji Okada,et al.  MOGRER: A vehicle study and realization for in-pipe inspection tasks , 1987, IEEE Journal on Robotics and Automation.

[14]  Guido La Rosa,et al.  A low-cost lightweight climbing robot for the inspection of vertical surfaces , 2002 .

[15]  Giovanni Muscato,et al.  A modular approach for the design of the Alicia climbing robot for industrial inspection , 2004, Ind. Robot.

[16]  Karsten Berns,et al.  Development of a sealing system for a climbing robot with negative pressure adhesion , 2007 .

[17]  Giovanni Muscato,et al.  Adhesion Control for the Alicia3 Climbing Robot , 2005 .

[18]  Giovanni Muscato,et al.  SCID - a non-actuated robot for walls exploration , 2001, 2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Proceedings (Cat. No.01TH8556).

[19]  Carlos Balaguer,et al.  Robot applications against gravity , 2006, IEEE Robotics Autom. Mag..

[20]  Bryan Bridge.  CLIMBING ROBOTS FOR NONDESTRUCTIVE TESTING: HISTORICAL PERSPECTIVE AND FUTURE TRENDS , 2007 .

[21]  Karsten Berns,et al.  Climbing Robots for Commercial Applications - a survey , 2003 .

[22]  Zahurin Samad,et al.  Development of a low-cost modular pole climbing robot , 2000, 2000 TENCON Proceedings. Intelligent Systems and Technologies for the New Millennium (Cat. No.00CH37119).

[23]  Giovanni Muscato,et al.  STRUCTURE AND MODEL IDENTIFICATION OF A VORTEX-BASED SUCTION CUP , 2008 .

[24]  K. Autumn,et al.  Mechanisms of Adhesion in Geckos1 , 2002, Integrative and comparative biology.

[25]  J. Billingsley,et al.  A climbing robot with minimal structure , 1991 .

[26]  Bing Lam Luk,et al.  Robug II: An intelligent wall climbing robot , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[27]  Jianzhong Shang,et al.  Development of a climbing robot for inspection of long weld lines , 2008, Ind. Robot.