Novel fluid grid and voidage calculation techniques for a discrete element model of a 3D cylindrical fluidized bed

Abstract A discrete element model (DEM) combined with computational fluid dynamics (CFD) was developed to model particle and fluid behaviour in 3D cylindrical fluidized beds. Novel techniques were developed to (1) keep fluid cells, defined in cylindrical coordinates, at a constant volume in order to ensure the conditions for validity of the volume-averaged fluid equations were satisfied and (2) smoothly and accurately measure voidage in arbitrarily shaped fluid cells. The new technique for calculating voidage was more stable than traditional techniques, also examined in the paper, whilst remaining computationally-effective. The model was validated by quantitative comparison with experimental results from the magnetic resonance imaging of a fluidised bed analysed to give time-averaged particle velocities. Comparisons were also made between theoretical determinations of slug rise velocity in a tall bed. It was concluded that the DEM-CFD model is able to investigate aspects of the underlying physics of fluidisation not readily investigated by experiment.

[1]  J. Kuipers,et al.  Fully resolved simulation of a gas-fluidized bed: A critical test of DEM models , 2013 .

[2]  Yurong He,et al.  Discrete particle modeling of granular temperature distribution in a bubbling fluidized bed , 2012 .

[3]  Abdallah S. Berrouk,et al.  Accurate void fraction calculation for three-dimensional discrete particle model on unstructured mesh , 2009 .

[4]  Colin Thornton,et al.  Modeling gas-particle two-phase flows with complex and moving boundaries using DEM-CFD with an immersed boundary method , 2013 .

[5]  J. Kuipers,et al.  Drag force of intermediate Reynolds number flow past mono- and bidisperse arrays of spheres , 2007 .

[6]  Wei Ge,et al.  Large-scale DNS of gas-solid flows on Mole-8.5 , 2010, 1011.2613.

[7]  Yutaka Tsuji,et al.  Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe , 1992 .

[8]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[9]  J. Kuipers,et al.  Discrete particle simulation of bubble and slug formation in a two-dimensional gas-fluidised bed: A hard-sphere approach. , 1996 .

[10]  Daniel J. Holland,et al.  Adapting Data Processing To Compare Model and Experiment Accurately: A Discrete Element Model and Magnetic Resonance Measurements of a 3D Cylindrical Fluidized Bed , 2013, Industrial & engineering chemistry research.

[11]  C Zeilstra,et al.  Simulation of density segregation in vibrated beds. , 2008, Physical review. E, Statistical, nonlinear, and soft matter physics.

[12]  P. Fennell,et al.  Rise velocities of bubbles and slugs in gas-fluidised beds : Ultra-fast magnetic resonance imaging , 2007 .

[13]  D. Gidaspow,et al.  A bubbling fluidization model using kinetic theory of granular flow , 1990 .

[14]  M. Horio,et al.  DEM simulation of polydisperse systems of particles in a fluidized bed , 2009 .

[15]  Jam Hans Kuipers,et al.  Computer simulation of the hydrodynamics of a two-dimensional gas-fluidized bed , 1993 .

[16]  Aibing Yu,et al.  Discrete element simulation for pneumatic conveying of granular material , 2006 .

[17]  Aibing Yu,et al.  A new point-locating algorithm under three-dimensional hybrid meshes , 2008 .

[18]  Hassan Abbas Khawaja,et al.  Quantitative Analysis of Accuracy of Voidage Computations in CFD-DEM Simulations , 2012 .

[19]  Jam Hans Kuipers,et al.  Mixing and segregation in a bidisperse gas-solid fluidized bed: a numerical and experimental study , 2004 .

[20]  Francesco Paolo Di Maio,et al.  Homogeneous and bubbling fluidization regimes in DEM-CFD simulations : Hydrodynamic stability of gas and liquid fluidized beds , 2007 .

[21]  Lynn F. Gladden,et al.  Spatially resolved measurement of anisotropic granular temperature in gas-fluidized beds , 2008 .

[22]  J. Kuipers,et al.  Numerical study of segregation using a new drag force correlation for polydisperse systems derived from lattice-Boltzmann simulations , 2007 .

[23]  B. P. Leonard,et al.  A stable and accurate convective modelling procedure based on quadratic upstream interpolation , 1990 .

[24]  P. Fennell,et al.  Oscillations in gas-fluidized beds: Ultra-fast magnetic resonance imaging and pressure sensor measurements , 2007 .

[25]  P. Gaskell,et al.  Curvature‐compensated convective transport: SMART, A new boundedness‐ preserving transport algorithm , 1988 .

[26]  Y. Tsuji,et al.  Discrete particle simulation of two-dimensional fluidized bed , 1993 .

[27]  Carl Wassgren,et al.  An exact method for determining local solid fractions in discrete element method simulations , 2010 .

[28]  Stefan Heinrich,et al.  DEM–CFD modeling of a fluidized bed spray granulator , 2011 .

[29]  John F. Davidson,et al.  Slug flow in fluidised beds , 1967 .

[30]  Lynn F. Gladden,et al.  Validation of a discrete element model using magnetic resonance measurements , 2009 .

[31]  Lynn F. Gladden,et al.  Granular temperature: Comparison of Magnetic Resonance measurements with Discrete Element Model simulations , 2008 .

[32]  T. B. Anderson,et al.  Fluid Mechanical Description of Fluidized Beds. Equations of Motion , 1967 .

[33]  Xiaoping Chen,et al.  Investigation of solid mixing mechanisms in a bubbling fluidized bed using a DEM—CFD approach , 2012 .

[34]  Xiaoping Chen,et al.  Development and test of CFD-DEM model for complex geometry: A coupling algorithm for Fluent and DEM , 2013, Comput. Chem. Eng..

[35]  Britt Halvorsen,et al.  Numerical simulation of particulate flow by the Eulerian-Lagrangian and the Eulerian-Eulerian approach with application to a fluidized bed , 2005, Comput. Chem. Eng..

[36]  Kelvin Chu,et al.  Numerical simulation of complex particle-fluid flows , 2006 .