Efficient speckle-free laser marking using a spatial light modulator

An approach for laser marking surfaces using a liquid–crystal-based spatial light modulator (LC-SLM) for beam patterning and manipulation is presented, designed to avoid the speckle interference problem which is a typical drawback of current SLM-based laser marking processes. In our approach, the LC-SLM is used to generate complex two-dimensional micropatterns (e.g., 20 × 20 datamatrices) with overall dimensions of < 320 by 320 μm. The micropatterns are generated in a series of 16 steps, using a Fresnel zone lens (FZL) combined with a computer-generated hologram (CGH); for each step the whole kinoform (FZL + CGH) is spatially shifted off-axis by a different amount of pixels to build-up the required pattern. In comparison with other SLM-based laser marking approaches already reported in the literature, our method not only eliminates (or at least significantly reduces) unwanted speckle interference but also reduces the laser power required for marking.

[1]  Nobuo Nishida,et al.  Variable holographic femtosecond laser processing by use of a spatial light modulator , 2005 .

[2]  Stuart Edwardson,et al.  Ultrashort pulse laser patterning of indium tin oxide thin films on glass by uniform diffractive beam patterns , 2012 .

[3]  Giancarlo Ruocco,et al.  Computer generation of optimal holograms for optical trap arrays. , 2007, Optics express.

[4]  G. Dearden,et al.  High-speed uniform parallel 3D refractive index micro-structuring of poly(methyl methacrylate) for volume phase gratings , 2010 .

[5]  Brandon Redding,et al.  Speckle-free laser imaging using random laser illumination , 2011, Nature Photonics.

[6]  J. Davis,et al.  Fractional pixel translations of Fresnel lenses written onto spatial light modulators. , 1995, Applied optics.

[7]  Andrew Waddie,et al.  Application of cooled spatial light modulator for high power nanosecond laser micromachining. , 2010, Optics express.

[8]  Andrew J. Waddie,et al.  Design of diffractive optical elements for high-power laser applications , 2004 .

[9]  O. Bryngdahl,et al.  Iterative Fourier-transform algorithm applied to computer holography , 1988 .

[10]  J. Parry,et al.  Compensation for time fluctuations of phase modulation in a liquid-crystal-on-silicon display by process synchronization in laser materials processing. , 2011, Applied optics.

[11]  Hirotsugu Yamamoto,et al.  Experimental investigation of the closest parallel pulses in holographic femtosecond laser processing , 2012 .

[12]  J. Parry,et al.  Application of a liquid crystal spatial light modulator to laser marking. , 2011, Applied optics.

[13]  Shy Shoham,et al.  Speckle elimination using shift-averaging in high-rate holographic projection. , 2009, Optics express.

[14]  M R Taghizadeh,et al.  Iterative algorithm for the design of diffractive phase elements for laser beam shaping. , 2002, Optics letters.

[15]  Yoshio Hayasaki,et al.  Second-harmonic optimization of computer-generated hologram. , 2011, Optics letters.

[16]  Stuart Edwardson,et al.  High throughput diffractive multi-beam femtosecond laser processing using a spatial light modulator , 2008 .

[17]  Stuart Edwardson,et al.  Diffractive multi-beam surface micro-processing using 10 ps laser pulses , 2009 .