Analysis of empirical core loss evaluation methods for non-sinusoidally fed medium frequency power transformers

Nowadays medium voltage conversion systems, like traction and energy distribution systems, aim to increase power density. Volume, weight and material reduction are gaining the market today. Due to the development of new high power semiconductor devices a new working frequency range is conceived, where magnetic component reduction is feasible. The core element of these new conversion systems is the medium frequency transformer. For an optimized design of the conversion system, the correct determination of transformer core losses is essential. Sinusoidal approaches, accurate enough for line frequency transformers, do not cope with the non-sinusoidal waveforms of future medium voltage conversion systems. In the past few years several empirical methods derived from the original Steinmetz equation have been introduced to determine magnetic core losses for non-sinusoidal waveforms. This paper proposes extended expressions for core loss determination in case of rectangular three level voltage waveforms, typical of high power converters. These expressions are compared in simulation and with experimental results obtained in the same conditions using a reduced scale dc-ac conversion system prototype that includes a 61.6 kVA/2 kHz transformer. It is shown that some of these techniques allow a considerable loss estimation accuracy (error below 12% for any ratio).

[1]  W. Fu,et al.  A dynamic core loss model for soft ferromagnetic and power ferrite materials in transient finite element analysis , 2004, IEEE Transactions on Magnetics.

[2]  Jon Clare.  Advanced power converters for universal and flexible power management in future electricity networks , 2009, 2009 13th European Conference on Power Electronics and Applications.

[3]  Alfred Rufer,et al.  Configurable front-end converters for multicurrent locomotives operated on 16 2/3 Hz AC and 3 kV DC systems , 2003 .

[4]  C. W. Tipton,et al.  High-Density Nanocrystalline Core Transformer for High-Power High-Frequency Resonant Converter , 2008, IEEE Transactions on Industry Applications.

[5]  Staffan Norrga.  A soft-switched bi-directional isolated AC/DC converter for AC-fed railway propulsion applications , 2002 .

[6]  W. Shen.  Design of High-density Transformers for High-frequency High-power Converters , 2006 .

[7]  D. Jiles,et al.  Theory of ferromagnetic hysteresis , 1986 .

[8]  G. Bertotti.  General properties of power losses in soft ferromagnetic materials , 1988 .

[9]  C.R. Sullivan,et al.  Improved calculation of core loss with nonsinusoidal waveforms , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[10]  Chas.P. Steinmetz,et al.  On the law of hysteresis , 1984, Proceedings of the IEEE.

[11]  A. Van den Bossche,et al.  Measurement and loss model of ferrites with non-sinusoidal waveforms , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[12]  Alfred Rufer,et al.  Advanced Power Converter for Universal and Flexible Power Management in Future Electricity Network , 2007 .

[13]  Charles R. Sullivan,et al.  Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters , 2002, 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings..

[14]  W.A. Roshen,et al.  A Practical, Accurate and Very General Core Loss Model for Nonsinusoidal Waveforms , 2005, IEEE Transactions on Power Electronics.

[15]  Yves Bernard,et al.  Dynamic hysteresis modeling based on Preisach model , 2002 .

[16]  H. Akagi,et al.  A Bidirectional Isolated DC–DC Converter as a Core Circuit of the Next-Generation Medium-Voltage Power Conversion System , 2007, IEEE Transactions on Power Electronics.

[17]  R. D. De Doncker,et al.  Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).