The morphology and property of HDPE in the presence of oscillation pressure and poly(ethylene terephthalate)
暂无分享,去创建一个
Hong Liu | Jie Zhang | Fanghui Liu | X. Qian | Xueqin Gao
[1] G. Zhong,et al. Injection molding-induced morphology of thermoplastic polymer blends , 2005 .
[2] Jie Zhang,et al. Mechanical properties and structure of high‐density polyethylene samples prepared by injection molding with low‐frequency vibration , 2005 .
[3] Q. Fu,et al. Vibration‐induced change of crystal structure in isotactic polypropylene and its improved mechanical properties , 2004 .
[4] Rui Huang,et al. Morphology and nonisothermal crystallization of in situ microfibrillar poly(ethylene terephthalate)/polypropylene blend fabricated through slit‐extrusion, hot‐stretch quenching , 2004 .
[5] B. Hsiao,et al. Shear-Induced Crystallization in Novel Long Chain Branched Polypropylenes by in Situ Rheo-SAXS and -WAXD , 2003 .
[6] I. Dukovski,et al. Langevin dynamics simulations of early stage shish-kebab crystallization of polymers in extensional flow , 2003 .
[7] B. Hsiao,et al. Shear-Induced Precursor Structures in Isotactic Polypropylene Melt by in-Situ Rheo-SAXS and Rheo-WAXD Studies , 2002 .
[8] A. Cunha,et al. Recycling of poly(ethylene terephthalate) as polymer‐polymer composites , 2002 .
[9] Mervyn J Miles,et al. In-Situ Atomic Force Microscopy of Polyethylene Crystallization. 1. Crystallization from an Oriented Backbone , 2001 .
[10] M. Cakmak,et al. A structure oriented model to simulate the shear induced crystallization in injection moulded polymers : a Lagrangian approach , 1996 .
[11] G. Michler,et al. Comparative study of size and distribution of lamellar thicknesses and long periods in polyethylene with a shish-kebab structure , 1996, Journal of Materials Science.
[12] Z. Zhong,et al. The occurrence of the γ-phase in injection moulded polypropylene in relation to the processing conditions , 1996 .
[13] S. Picken,et al. Structure and rheology of aramid solutions: x-ray scattering measurements , 1990 .
[14] T. Ezquerra,et al. Conductive polyethylene-carbon black composites by elongational-flow injection molding Part 3. Study of the structure and morphology , 1989 .
[15] B. D. Favis,et al. Influence of composition on the morphology of polypropylene/polycarbonate blends , 1988 .
[16] V. M. Nadkarni,et al. Extensional flow‐induced crystallization in polyethylene melt spinning , 1977 .
[17] Li Youbing,et al. Structure and properties of polyethylene prepared via low‐frequency vibration‐assisted injection molding , 2005 .
[18] M. Miles,et al. Direct Observation of Polyethylene Shish-Kebab Crystallization Using in-Situ Atomic Force Microscopy , 2001 .