The development of a monolithic aerogel glazed window for an energy retrofitting project

The implementation of innovative materials for energy saving is a main focus in the building sector. In this context, aerogels are often indicated as really promising materials. In particular, aerogel blankets have already shown potential in many retrofitting projects while the development of glazing systems with aerogel is still at the research stage. This paper describes the development of double pane glazing systems with monolithic silica aerogel in their cavity. The results of a multi-disciplinary analysis, including thermal and lighting tests, are reported. This new monolithic aerogel window is then used in the retrofitting project of an educational building completed in the 1960s. A level 3 energy audit was conducted through measurements of the envelope transmissibility, the building air-tightness, and several indoor environmental parameters. The energy audit provided data for an accurate energy model and to perform a detailed analysis of the energy consumptions of the building. Several energy saving measures for the case study building were then investigated. Lighting and energy simulations allowed comparisons of different designs of the aerogel window with the intent to guarantee sufficient daylight, clear perception of the external environment, and high energy saving. Finally, this paper provides a sensitivity analysis of the investigated retrofitting strategies in different climates, with the intent to show where aerogel windows may represent a valuable retrofitting choice.

[1]  Bjørn Petter Jelle,et al.  Traditional, state-of-the-art and future thermal building insulation materials and solutions Prope , 2011 .

[2]  Pascal Henry Biwole,et al.  Limiting windows offset thermal bridge losses using a new insulating coating , 2014 .

[3]  Leon R. Glicksman,et al.  Thermal conductivity and characterization of compacted, granular silica aerogel , 2014 .

[4]  Arild Gustavsen,et al.  Insulating glazing units with silica aerogel granules: The impact of particle size , 2014 .

[5]  Cinzia Buratti,et al.  Evolutive Housing System: refurbishment with new technologies and unsteady simulations of energy performance , 2014 .

[6]  Finn Harken Kristiansen,et al.  Development of windows based on highly insulating aerogel glazings , 2004 .

[7]  U. Berardi.  Building Energy Consumption in US, EU, and BRIC Countries☆ , 2015 .

[8]  Giuseppe Peter Vanoli,et al.  Different methods for the modelling of thermal bridges into energy simulation programs: Comparisons of accuracy for flat heterogeneous roofs in Italian climates , 2012 .

[9]  S. Kistler,et al.  Coherent Expanded Aerogels and Jellies. , 1931, Nature.

[10]  Ann M. Anderson,et al.  Silica aerogels prepared via rapid supercritical extraction: Effect of process variables on aerogel properties , 2009 .

[11]  E. Moretti,et al.  Glazing systems with silica aerogel for energy savings in buildings , 2012 .

[12]  U. Schubert,et al.  Aerogels-Airy Materials: Chemistry, Structure, and Properties. , 1998, Angewandte Chemie.

[13]  Jianlei Niu,et al.  Application of super-insulating translucent silica aerogel glazing system on commercial building envelope of humid subtropical climates - Impact on space cooling load , 2015 .

[14]  Cinzia Buratti,et al.  Lighting and Energetic Characteristics of Transparent Insulating Materials: Experimental Data and Calculation , 2011 .

[15]  Arild Gustavsen,et al.  Aerogel granulate glazing facades and their application potential from an energy saving perspective , 2015 .

[16]  Gerardo Maria Mauro,et al.  Experimental validation of a numerical code by thin film heat flux sensors for the resolution of thermal bridges in dynamic conditions , 2014 .

[17]  Saffa Riffat,et al.  Toward aerogel based thermal superinsulation in buildings: A comprehensive review , 2014 .

[18]  E. Moretti,et al.  Multipurpose characterization of glazing systems with silica aerogel: In-field experimental analysis of thermal-energy, lighting and acoustic performance , 2014 .

[19]  Giuseppe Peter Vanoli,et al.  Energy retrofit of an educational building in the ancient center of Benevento. Feasibility study of energy savings and respect of the historical value , 2015 .

[20]  A. Beck,et al.  Silica-aerogel granulate – Structural, optical and thermal properties , 2004 .

[21]  Bjørn Petter Jelle,et al.  Experimental Investigations of Aerogel-Incorporated Ultra-High Performance Concrete , 2015 .

[22]  Mtas.  Energy Conservation Code , 1978 .

[23]  Arild Gustavsen,et al.  Aerogel insulation for building applications: A state-of-the-art review , 2011 .

[24]  Mohammad Hasan Abbasi,et al.  Silica aerogel; synthesis, properties and characterization , 2008 .

[25]  Neil Hewitt,et al.  Zero carbon buildings refurbishment--A Hierarchical pathway , 2011 .

[26]  Jan Kosny,et al.  Cold Climate Building Enclosure Solutions , 2013 .

[27]  Patrick Achard,et al.  Aerogel-based thermal superinsulation: an overview , 2012, Journal of Sol-Gel Science and Technology.

[28]  Paul Cooper,et al.  Existing building retrofits: Methodology and state-of-the-art , 2012 .

[29]  Ali GhaffarianHoseini,et al.  Sustainable energy performances of green buildings: a review of current theories, implementations and challenges , 2013 .

[30]  Giorgio Baldinelli,et al.  A quantitative methodology to evaluate thermal bridges in buildings , 2012 .

[31]  Standard Ashrae.  Thermal Environmental Conditions for Human Occupancy , 1992 .

[32]  Guillermo Escrivá-Escrivá,et al.  Method for modelling space conditioning aggregated daily load curves: Application to a university building , 2010 .

[33]  Svend Svendsen,et al.  Monolithic silica aerogel in superinsulating glazings , 1998 .

[34]  Umberto Berardi,et al.  Daylighting in an atrium-type high performance house , 2014 .

[35]  Finn Harken Kristiansen,et al.  Super insulating aerogel glazing , 2005 .

[36]  Pascal Henry Biwole,et al.  A study on the thermal performance of exterior walls covered with a recently patented silica-aerogel-based insulating coating , 2014 .

[37]  Umberto Berardi,et al.  Stakeholders’ influence on the adoption of energy-saving technologies in Italian homes , 2013 .

[38]  Cinzia Buratti,et al.  Experimental performance evaluation of aerogel glazing systems , 2012 .

[39]  Natale Arcuri,et al.  Dynamic Thermal Characteristics of Opaque Building Components. A Proposal for the Extension of EN ISO 13786 , 2015 .

[40]  Arild Gustavsen,et al.  Lightweight and thermally insulating aerogel glass materials , 2014 .

[41]  Sughwan Kim,et al.  Improvement of window thermal performance using aerogel insulation film for building energy saving , 2013, Journal of Thermal Analysis and Calorimetry.

[42]  Saffa Riffat,et al.  Optimizing insulation thickness and analysing environmental impacts of aerogel-based thermal superinsulation in buildings , 2014 .

[43]  Mohammad. Rasul,et al.  Energy conservation measures in an institutional building in sub-tropical climate in Australia , 2010 .

[44]  Umberto Desideri,et al.  European project Educa-RUE: An example of energy efficiency paths in educational buildings , 2012 .

[45]  Arild Gustavsen,et al.  Fenestration of Today and Tomorrow: A State-of-the-Art Review and Future Research Opportunities , 2013 .