A simulation tool for analysis and design of reverse electrodialysis using concentrated brines

Abstract Reverse electrodialysis (SGP-RE or RED) represents a viable technology for the conversion of the salinity gradient power into electric power. A comprehensive model is proposed for the RED process using sea or brackish water and concentrated brine as feed solutions. The goals were (i) reliably describing the physical phenomena involved in the process and (ii) providing information for optimal equipment design. For such purposes, the model has been developed at two different scales of description: a lower scale for the repeating unit of the system (cell pair), and a higher scale for the entire equipment (stack). The model was implemented in a process simulator, validated against original experimental information and then used to investigate the influence of the main operating factors and on power output. Feed solutions of different salinities were also tested. A good matching was found between predictions and experiments for a wide range of inlet concentrations, flow rates and feed temperatures. Optimal feed conditions, for the adopted system geometry and membranes, have been found employing brackish water (0.08–0.1 M NaCl) as dilute and brine (4.5–5 M NaCl) as concentrate to generate the highest power density at 40 °C temperature. The model can be used to explore the full potential of the RED technology, especially for any investigation regarding the future scale-up of the process.

[1]  A. Albanese,et al.  Investigation of electrode material – redox couple systems for reverse electrodialysis processes. Part II: Experiments in a stack with 10–50 cell pairs , 2013 .

[2]  R. E. Pattle.  Production of Electric Power by mixing Fresh and Salt Water in the Hydroelectric Pile , 1954, Nature.

[3]  J. Post,et al.  Salinity-gradient power : Evaluation of pressure-retarded osmosis and reverse electrodialysis , 2007 .

[4]  N Lakshminarayanaiah,et al.  Transport phenomena in artificial membranes. , 1965, Chemical reviews.

[5]  David L. Langhus,et al.  Modern Electrochemistry, Volume 1: Ionics (Bockris, John O'M.; Reddy, Amulya K. N.) , 1999 .

[6]  Dc Kitty Nijmeijer,et al.  Experimentally obtainable energy from mixing river water, seawater or brines with reverse electrodialysis , 2014 .

[7]  S. S. Islam,et al.  Extension of the Falkenhagen-Leist-Kelbg equation to the electrical conductance of concentrated aqueous electrolytes , 1991 .

[8]  Alessandro Galia,et al.  Investigation of electrode material – Redox couple systems for reverse electrodialysis processes. Part I: Iron redox couples , 2012 .

[9]  J. Weinstein,et al.  Electric Power from Differences in Salinity: The Dialytic Battery , 1976, Science.

[10]  Enrico Drioli,et al.  Probing membrane and interface properties in concentrated electrolyte solutions , 2014 .

[11]  Kenneth S. Pitzer,et al.  Thermodynamics of electrolytes. I. Theoretical basis and general equations , 1973 .

[12]  N. Kalogerakis,et al.  Applied parameter estimation for chemical engineers , 2000 .

[13]  J. Veerman,et al.  Reverse electrodialysis: A validated process model for design and optimization , 2011 .

[14]  G. J. Harmsen,et al.  Reverse electrodialysis : Performance of a stack with 50 cells on the mixing of sea and river water , 2009 .

[15]  Matthias Wessling,et al.  Practical potential of reverse electrodialysis as process for sustainable energy generation. , 2009, Environmental science & technology.

[16]  P. M. Biesheuvel,et al.  Direct power production from a water salinity difference in a membrane-modified supercapacitor flow cell. , 2010, Environmental science & technology.

[17]  Joseph Jagur-Grodzinski,et al.  Novel process for direct conversion of free energy of mixing into electric power , 1986 .

[18]  C. F. Weber,et al.  Calculation of Pitzer Parameters at High Ionic Strengths , 2000 .

[19]  Michele Ciofalo,et al.  CFD Simulation of Mass Transfer Phenomena in Spacer Filled Channel for Reverse Electrodyalisis Applications , 2013 .

[20]  Andrea Cipollina,et al.  Integrated production of fresh water, sea salt and magnesium from sea water , 2012 .

[21]  Andrea Cipollina,et al.  Modelling the Reverse ElectroDialysis process with seawater and concentrated brines , 2012 .

[22]  Dorothea C. Nijmeijer,et al.  Theoretical power density from salinity gradients using reverse electrodialysis , 2012 .

[23]  Jin Gi Hong,et al.  Modeling of power generation from the mixing of simulated saline and freshwater with a reverse electrodialysis system: The effect of monovalent and multivalent ions , 2013 .

[24]  R. Lacey.  Energy by reverse electrodialysis , 1980 .

[25]  E. Brauns,et al.  Salinity gradient power by reverse electrodialysis: effect of model parameters on electrical power output , 2009 .

[26]  E. Culea,et al.  Structural and electrochemical investigations of the electrodes obtained by recycling of lead acid batteries , 2016 .

[27]  J. Veerman,et al.  Reducing power losses caused by ionic shortcut currents in reverse electrodialysis stacks by a validated model , 2008 .

[28]  E. Brauns.  Towards a worldwide sustainable and simultaneous large-scale production of renewable energy and potable water through salinity gradient power by combining reversed electrodialysis and solar power? , 2008 .

[29]  F. Helfferich,et al.  Ion-exchange membrane separation processes (Membrane science and technology series, vol. 9), H. Strathmann. Elsevier, Amsterdam (2004), ISBN: 044450236-X , 2005 .

[30]  C. Forgacs,et al.  Recent developments in the utilization of salinity power , 1982 .

[31]  Michele Ciofalo,et al.  CFD prediction of concentration polarization phenomena in spacer-filled channels for reverse electrodialysis , 2014 .

[32]  D. Brogioli.  Extracting renewable energy from a salinity difference using a capacitor. , 2009, Physical review letters.

[33]  Kitty Nijmeijer,et al.  Doubled power density from salinity gradients at reduced intermembrane distance. , 2011, Environmental science & technology.