OBTAINING FRACTURE INFORMATION FOR LOW‐PERMEABILITY (TIGHT) GAS SANDSTONES FROM SIDEWALL CORES

We illustrate a fracture characterization technique applicable to all tight gas sandstones. The technique uses microfractures and cements in the rock mass identified using SEM-based cathodoluminescence imaging to provide information on unsampled large fractures, including strike and cross-cutting relationships, intensity, and likelihood of preserved open fractures. We applied the technique in two tight gas sandstone wells in the Pennsylvanian Pottsville Formation, Black Warrior Basin, Alabama, USA. In one well, data was obtained entirely from drilled 1–inch diameter sidewall cores that were oriented using image logs and features visible in cores. We predicted fracture porosity preservation in large fractures using late cements in the rock mass as a proxy for fracture observation. Results from the technique are consistent with what is known of large fractures in this area. Where we predicted open, high intensity fractures, substantial gas flares were observed during drilling. By combining microstructural and diagenetic observations, it is possible to overcome the inadequate fracture sampling that plagues evaluation of natural fractures and that relies solely on observations of macroscopically visible fractures.

[1]  Jyoti Shah,et al.  A rapid method for strain estimation from flattened parallel folds , 2006 .

[2]  Ortega Pérez,et al.  Fracture-size scaling and stratigraphic controls on fracture intensity , 2002 .

[3]  J. Olson,et al.  Characteristics and origins of coal cleat: A review , 1998 .

[4]  Stephen E. Laubach,et al.  Brittle Deformation in Sandstone Diagenesis as Revealed by Scanned Cathodoluminescence Imaging with Application to Characterization of Fractured Reservoirs , 2000 .

[5]  S. Laubach.  Practical approaches to identifying sealed and open fractures , 2003 .

[6]  W. Mooney,et al.  Geophysical Framework of the Continental United States , 1990 .

[7]  P. L. Hancock,et al.  Brittle microtectonics: principles and practice , 1985 .

[8]  Stephen E. Laubach,et al.  Are open fractures necessarily aligned with maximum horizontal stress , 2004 .

[9]  R. Marrett,et al.  Extent of power-law scaling for natural fractures in rock , 1999 .

[10]  S. Laubach.  A Method to Detect Natural Fracture Strike in Sandstones , 1997 .

[11]  J. Olson,et al.  Integrating wellbore data and geomechanical modeling for effective characterization of naturally fractured reservoirs , 1998 .

[12]  Stephen E. Laubach,et al.  Subsurface fractures and their relationship to stress history in East Texas basin sandstone , 1988 .

[13]  Stephen E. Laubach,et al.  Modeling Coupled Fracture-Matrix Fluid Flow in Geomechanically Simulated Fracture Networks , 2005 .

[14]  M. Zoback,et al.  Chapter 24: Tectonic stress field of the continental United States , 1989 .

[15]  S. Laubach,et al.  Rapid digital quantification of microfracture populations , 2006 .

[16]  R. Marrett,et al.  Prediction of macrofracture properties using microfracture information, Mesaverde Group sandstones, San Juan basin, New Mexico , 2000 .

[17]  R. H. Lander,et al.  Predicting Porosity through Simulating Sandstone Compaction and Quartz Cementation , 1999 .

[18]  Jon E. Olson,et al.  Sublinear scaling of fracture aperture versus length: An exception or the rule? , 2003 .

[19]  W. A. Thomas,et al.  Composition of Carboniferous sandstones and tectonic framework of southern Appalachian-Ouachita orogen , 1983 .

[20]  J. Olson,et al.  Coevolution of crack-seal texture and fracture porosity in sedimentary rocks: cathodoluminescence observations of regional fractures , 2004 .

[21]  M. Goldhaber,et al.  Origin of minerals in joint and cleat systems of the Pottsville Formation, Black Warrior basin, Alabama: Implications for coalbed methane generation and production , 2003 .

[22]  Stephen E. Laubach,et al.  A scale-independent approach to fracture intensity and average spacing measurement , 2006 .

[23]  R. Marrett.  Aggregate properties of fracture populations , 1996 .