Recent progress on thin-film encapsulation technologies for organic electronic devices

[1]  Torahiko Ando,et al.  Macromolecular electronic device: Field-effect transistor with a polythiophene thin film , 1986 .

[2]  A. Aberle.  Overview on SiN surface passivation of crystalline silicon solar cells , 2001 .

[3]  Steven M. George,et al.  Surface Chemistry for Atomic Layer Growth , 1996 .

[4]  Jin-seong Park,et al.  Flexible full color organic light-emitting diode display on polyimide plastic substrate driven by amorphous indium gallium zinc oxide thin-film transistors , 2009 .

[5]  S. T. Lee,et al.  Long-lifetime thin-film encapsulated organic light-emitting diodes , 2008 .

[6]  Gordon L. Graff,et al.  PML/oxide/PML barrier layer performance differences arising from use of UV or electron beam polymerization of the PML layers , 1997 .

[7]  C. Adachi,et al.  Organic Light Emitting Materials and Devices XVI , 2012 .

[8]  J. Perrin,et al.  The physics of plasma-enhanced chemical vapour deposition for large-area coating: industrial application to flat panel displays and solar cells , 2000 .

[9]  A. Sood,et al.  ALD/MLD of novel layer-engineered Zn-based inorganic-organic hybrid thin films using heterobifunctional 4-aminophenol as an organic precursor. , 2013, Dalton transactions.

[10]  A. Heeger,et al.  Synthesis of electrically conducting organic polymers: halogen derivatives of polyacetylene, (CH)x , 1977 .

[11]  W. Xiao,et al.  High barrier properties of transparent thin-film encapsulations for top emission organic light-emitting diodes , 2014 .

[12]  Veena Misra,et al.  Encapsulation of organic solar cells with ultrathin barrier layers deposited by ozone-based atomic layer deposition , 2010 .

[13]  W. Wang,et al.  Degradation of organic light-emitting devices due to formation and growth of dark spots , 2001 .

[14]  Wolfgang Kowalsky,et al.  Al2O3/ZrO2 Nanolaminates as Ultrahigh Gas‐Diffusion Barriers—A Strategy for Reliable Encapsulation of Organic Electronics , 2009 .

[15]  Karsten Heuser,et al.  Permeation rate measurements by electrical analysis of calcium corrosion , 2003 .

[16]  M. Weaver,et al.  Thin-film permeation-barrier technology for flexible organic light-emitting devices , 2004, IEEE Journal of Selected Topics in Quantum Electronics.

[17]  Yun Cheol Han,et al.  Thin film encapsulation for organic light emitting diodes using a multi-barrier composed of MgO prepared by atomic layer deposition and hybrid materials , 2013 .

[18]  H. Chae,et al.  Extremely bendable thin-film encapsulation of organic light-emitting diodes , 2013 .

[19]  H. Chae,et al.  Optimization of Al2O3/ZrO2 nanolaminate structure for thin-film encapsulation of OLEDs , 2012 .

[20]  Y. Duan,et al.  Passivation Properties of UV-Curable Polymer for Organic Light Emitting Diodes , 2013 .

[21]  Shichang Zou,et al.  Low temperature PECVD SiNx films applied in OLED packaging , 2003 .

[22]  S. George.  Atomic layer deposition: an overview. , 2010, Chemical reviews.

[23]  Virginia R. Anderson,et al.  Molecular Layer Deposition of Zircone and ZrO2/Zircone Alloy Films: Growth and Properties , 2013 .

[24]  M. Kempe.  Modeling of rates of moisture ingress into photovoltaic modules , 2006 .

[25]  Yun Cheol Han,et al.  A flexible moisture barrier comprised of a SiO2-embedded organic–inorganic hybrid nanocomposite and Al2O3 for thin-film encapsulation of OLEDs , 2013 .

[26]  R. McLean,et al.  Alucone interlayers to minimize stress caused by thermal expansion mismatch between Al₂O₃ films and Teflon substrates. , 2013, ACS applied materials & interfaces.

[27]  P. Magnante,et al.  Electroluminescence in Organic Crystals , 1963 .

[28]  Y. Leterrier.  Durability of nanosized oxygen-barrier coatings on polymers , 2003 .

[29]  Chien-Jung Chiang,et al.  Mechanical modeling of flexible OLED devices , 2009 .

[30]  C. Adachi,et al.  Organic Light Emitting Materials and Devices XII , 2017 .

[31]  Jie Yang,et al.  Degradation mechanisms in organic light-emitting diodes , 2000, SPIE Optics + Photonics.

[32]  C. Tang.  Two‐layer organic photovoltaic cell , 1986 .

[33]  Yong Jin Jeong,et al.  Al2O3/TiO2 nanolaminate thin film encapsulation for organic thin film transistors via plasma-enhanced atomic layer deposition. , 2014, ACS applied materials & interfaces.

[34]  A. Windle,et al.  Structure and oxygen-barrier properties of metallized polymer film , 1983 .

[35]  Wendy D. Bennett,et al.  Gas permeation and lifetime tests on polymer-based barrier coatings , 2001, SPIE Optics + Photonics.

[36]  W. Kowalsky,et al.  Organic light emitting diodes , 1996, Proceedings of 8th International Conference on Indium Phosphide and Related Materials.

[37]  Kam Chuen Ng,et al.  Moisture permeability through multilayered barrier films as applied to flexible OLED display , 2007 .

[38]  Y. Duan,et al.  Method for Aluminum Oxide Thin Films Prepared through Low Temperature Atomic Layer Deposition for Encapsulating Organic Electroluminescent Devices , 2015, Materials.

[39]  Tetsuo Tsutsui,et al.  Blue-Light-Emitting Organic Electroluminescent Devices with Oxadiazole Dimer Dyes as an Emitter , 1992 .

[40]  K. Jung,et al.  High performance organic-inorganic hybrid barrier coating for encapsulation of OLEDs , 2011 .

[41]  Frank Stubhan,et al.  Moisture-resistant properties of SiNx films prepared by PECVD , 1998 .

[42]  Steven M. George,et al.  Gas diffusion barriers on polymers using Al2O3 atomic layer deposition , 2006 .

[43]  Y. Duan,et al.  Realization of Thin Film Encapsulation by Atomic Layer Deposition of Al2O3 at Low Temperature , 2013 .

[44]  J. Park,et al.  Permeation barrier properties of an Al2O3/ZrO2 multilayer deposited by remote plasma atomic layer deposition , 2014 .

[45]  A. Sood,et al.  Barrier properties of Al2O3 and alucone coatings and nanolaminates on flexible biopolymer films , 2012 .

[46]  Y. Duan,et al.  High-performance barrier using a dual-layer inorganic/organic hybrid thin-film encapsulation for organic light-emitting diodes , 2014 .

[47]  T. Suntola,et al.  METHOD FOR PRODUCING COMPOUND THIN FILMS BACKGROUND OF THE INVENTION , 2017 .

[48]  R. Horng,et al.  Properties of SiO2-like barrier layers on polyethersulfone substrates by low-temperature plasma-enhanced chemical vapor deposition , 2004 .

[49]  E. Coronado,et al.  Ionically Assisted Charge Injection in Hybrid Organic−Inorganic Light-Emitting Diodes , 2010 .

[50]  C. Hansen.  Water transport and condensation in fluoropolymer films , 2001 .

[51]  P. Blom,et al.  Degradation mechanisms in organic photovoltaic devices , 2012 .

[52]  Y. Gao,et al.  Plasma-deposited silicon oxide barrier films on polyethersulfone substrates: temperature and thickness effects , 2005 .

[53]  Chien-Jung Chiang,et al.  Electroluminescence characterization of FOLED devices under two type of external stresses caused by bending , 2010 .

[54]  G. Zentner,et al.  Water permeability in poly(ortho ester)s , 1992 .

[55]  W. Xiao,et al.  Fabrication of tunable [Al2O3:Alucone] thin-film encapsulations for top-emitting organic light-emitting diodes with high performance optical and barrier properties , 2014 .

[56]  Yves Leterrier,et al.  Mechanics of ITO on Plastic Substrates for Flexible Displays , 2005 .

[57]  Peter M. Martin,et al.  A new method for fabricating transparent barrier layers , 1996 .

[58]  Shui-Tong Lee,et al.  Metal diffusion from electrodes in organic light-emitting diodes , 1999 .

[59]  Yang Yong-qiang,et al.  Optimization of Al2O3 Films Deposited by ALD at Low Temperatures for OLED Encapsulation , 2014 .

[60]  T. Mikolajick,et al.  OLED compatible water-based nanolaminate encapsulation systems using ozone based starting layer , 2014 .

[61]  Han‐Ki Kim,et al.  Thin film passivation of organic light emitting diodes by inductively coupled plasma chemical vapor deposition , 2007 .

[62]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[63]  Christoph J. Brabec,et al.  The impact of water vapor transmission rate on the lifetime of flexible polymer solar cells , 2008 .

[64]  R. Horng,et al.  Transparent Barrier Coatings for Flexible Organic Light‐Emitting Diode Applications , 2006 .

[65]  S. Forrest,et al.  Reliability and degradation of organic light emitting devices , 1994 .

[66]  V. Bulović,et al.  Electroluminescence from single monolayers of nanocrystals in molecular organic devices , 2002, Nature.

[67]  Dae‐Shik Seo,et al.  Improvement of Permeation of Solvent-Free Multilayer Encapsulation of Thin Films on Poly(ethylene terephthalate) , 2006 .

[68]  B. Lee,et al.  Molecular layer deposition of ZrO2-based organic–inorganic nanohybrid thin films for organic thin film transistors , 2009 .

[69]  Hood Chatham,et al.  Oxygen diffusion barrier properties of transparent oxide coatings on polymeric substrates , 1996 .

[70]  A. Kahn,et al.  The origin of low water vapor transmission rates through Al2O3/ZrO2 nanolaminate gas-diffusion barriers grown by atomic layer deposition , 2010 .

[71]  M. Karppinen,et al.  Organic and inorganic–organic thin film structures by molecular layer deposition: A review , 2014, Beilstein journal of nanotechnology.

[72]  Perry D. Haaland,et al.  SiOx Gas Barrier Coatings on Polymer Substrates: Morphology and Gas Transport Considerations , 1999 .

[73]  Xu,et al.  Degradation mechanism of small molecule-based organic light-emitting devices , 1999, Science.

[74]  Takao Someya,et al.  Thermal stability of organic thin-film transistors with self-assembled monolayer dielectrics , 2010 .

[75]  Mikko Ritala,et al.  Atomic layer deposition chemistry: recent developments and future challenges. , 2003, Angewandte Chemie.

[76]  Frank Nüesch,et al.  Water Vapor and Oxygen Degradation Mechanisms in Organic Light Emitting Diodes , 2001 .

[77]  Andrew G. Glen,et al.  APPL , 2001 .

[78]  S. Guillerez,et al.  Definition of encapsulation barrier requirements: A method applied to organic solar cells , 2011 .

[79]  H. J. Hagger,et al.  Solid State Electronics , 1960, Nature.

[80]  Yves Leterrier,et al.  Mechanical integrity of transparent conductive oxide films for flexible polymer-based displays , 2004 .

[81]  W. Xiao,et al.  The improvement of thin film barrier performances of organic–inorganic hybrid nanolaminates employing a low-temperature MLD/ALD method , 2014 .

[82]  Soon Moon Jeong,et al.  Enhanced passivation characteristics in OLEDs by modification of aluminum cathodes using Ar+ ion beam , 2005 .

[83]  S. George,et al.  Growth and Properties of Hybrid Organic‐Inorganic Metalcone Films Using Molecular Layer Deposition Techniques , 2013 .

[84]  M. Reiter,et al.  Sol , 2018, Definitions.

[85]  Nicolas Schiller,et al.  Development of high barrier films on flexible polymer substrates , 2006 .

[86]  Peter Gluchowski,et al.  F , 1934, The Herodotus Encyclopedia.

[87]  Seungsik Oh,et al.  Gas diffusion barrier characteristics of Al2O3/alucone films formed using trimethylaluminum, water and ethylene glycol for organic light emitting diode encapsulation , 2013 .

[88]  Wendy D. Bennett,et al.  Organic light-emitting devices with extended operating lifetimes on plastic substrates , 2002 .

[89]  Kamala Rajan,et al.  Thin film encapsulated flexible organic electroluminescent displays , 2003 .

[90]  Arrelaine A. Dameron,et al.  Gas Diffusion Barriers on Polymers Using Multilayers Fabricated by Al2O3 and Rapid SiO2 Atomic Layer Deposition , 2008 .

[91]  Steven M. George,et al.  Ca test of Al2O3 gas diffusion barriers grown by atomic layer deposition on polymers , 2006 .

[92]  A. Sugimoto,et al.  Organic Light Emitting Devices on Polymer Substrates. , 2001 .

[93]  Virginia R. Anderson,et al.  Alucone Alloys with Tunable Properties Using Alucone Molecular Layer Deposition and Al2O3 Atomic Layer Deposition , 2012 .

[94]  Pekka Soininen,et al.  Perfectly Conformal TiN and Al2O3 Films Deposited by Atomic Layer Deposition , 1999 .

[95]  Dae‐Shik Seo,et al.  Effects of Defects in SiO2 Thin Films Prepared on Polyethylene Terephthalate by High-Temperature E-beam Deposition , 2006 .

[96]  F. Duerinckx,et al.  Defect passivation of industrial multicrystalline solar cells based on PECVD silicon nitride , 2002 .

[97]  Stergios Logothetidis,et al.  Flexible organic electronic devices: Materials, process and applications , 2008 .

[98]  S. George,et al.  Low-Temperature Al2O3 Atomic Layer Deposition , 2004 .