Mechanical and barrier properties of MOCVD processed alumina coatings on Ti6Al4V titanium alloy
暂无分享,去创建一个
C. Vahlas | D. Samélor | Y. Balcaen | J. Alexis | L. Lacroix | Jean-Denis Béguin | N. Răduţoiu | J. Béguin
[1] B. Sheldon,et al. Evaluation of Al2O3 MOCVD Coating for Titanium Alloys Protection under Severe Conditions at High Temperature , 2008 .
[2] S. Perişanu,et al. Protective Alumina Coatings by Low Temperature Metalorganic Chemical Vapour Deposition , 2007 .
[3] A. Gleizes,et al. Aluminium tri-iso-propoxide: Shelf life, transport properties, and decomposition kinetics for the low temperature processing of aluminium oxide-based coatings , 2007 .
[4] A. Gleizes,et al. Phase Transformations of Metallorganic Chemical Vapor Deposition Processed Alumina Coatings Investigated by In Situ Deflection , 2007 .
[5] M. Lafont,et al. CVD‐Fabricated Aluminum Oxide Coatings from Aluminum tri‐iso‐propoxide: Correlation Between Processing Conditions and Composition , 2007 .
[6] A. Gleizes,et al. Low Temperature MOCVD-Processed Alumina Coatings , 2006 .
[7] S. Matsuoka,et al. Evaluation of mechanical properties of ceramic coatings on a metal substrate , 2003 .
[8] M. Field. NASA TECHNICAL NOTE , 2002 .
[9] Jia-Hong Huang,et al. A tensile-film-cracking model for evaluating interfacial shear strength of elastic film on ductile substrate , 2000 .
[10] Jia-Hong Huang,et al. In situ observation of the cracking behavior of TiN coating on 304 stainless steel subjected to tensile strain , 1999 .
[11] Steve Bull,et al. Failure mode maps in the thin film scratch adhesion test , 1997 .
[12] V. Haanappel,et al. Formation of Thin Oxide Films by Metal-Organic Chemical Vapour Deposition , 1996 .
[13] H. Weiss. Adhesion of advanced overlay coatings: mechanisms and quantitative assessment , 1995 .
[14] H. Metselaar,et al. The mechanical properties of thin alumina films deposited by metal-organic chemical vapour deposition , 1995 .
[15] Michael L. Bauccio,et al. ASM engineering materials reference book , 1994 .
[16] G. Pharr,et al. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .
[17] D. C. Agrawal,et al. Measurement of the ultimate shear strength of a metal-ceramic interface , 1989 .