Comparison of Power Requirements: Flapping vs. Fixed Wing Vehicles

The power required by flapping and fixed wing vehicles in level flight is determined and compared. Based on a new modelling approach, the effects of flapping on the induced drag in flapping wing vehicles are mathematically described. It is shown that flapping causes a significant increase in the induced drag when compared with a non-flapping, fixed wing vehicle. There are two effects for that induced drag increase; one is due to tilting of the lift vector caused by flapping the wings and the other results from changes in the amount of the lift vector during flapping. The induced drag increase yields a significant contribution to the power required by flapping wing vehicles. Furthermore, the power characteristics of fixed wing vehicles are dealt with. It is shown that, for this vehicle type, the propeller efficiency plays a major role. This is because there are considerable differences in the propeller efficiency when taking the size of vehicles into account. Comparing flapping and fixed wing vehicles, the conditions are shown where flapping wing vehicles have a lower power demand and where fixed wing vehicles are superior regarding the required power. There is a tendency such that fixed wing vehicles have an advantage in the case of larger size vehicles and flapping wing vehicles have an advantage in the case of smaller size ones.

[1]  Bret W. Tobalske,et al.  Biomechanics and Physiology of Gait Selection in Flying Birds* , 2000, Physiological and Biochemical Zoology.

[2]  Thomas J. Mueller,et al.  An overview of micro air vehicle aerodynamics , 2001 .

[3]  Karl Herzog,et al.  Anatomie und Flugbiologie der Vögel , 1968 .

[4]  A Hedenström,et al.  Power of the wingbeat: modelling the effects of flapping wings in vertebrate flight , 2015, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[5]  Z. J. Wang,et al.  Flapping wing flight can save aerodynamic power compared to steady flight. , 2009, Physical review letters.

[6]  J. D. Delaurier,et al.  THE DEVELOPMENT AND TESTING OF A FULL-SCALE PILOTED ORNITHOPTER , 1999 .

[7]  Gottfried Sachs,et al.  Aerodynamic Cost of Flapping , 2015 .

[8]  Christian Breitsamter,et al.  Euler and Navier-Stokes Simulations of Two-Stage Hypersonic Vehicle Longitudinal Motions , 2000 .

[9]  Karim Mazaheri,et al.  Performance Analysis of a Flapping-Wing Vehicle Based on Experimental Aerodynamic Data , 2012 .

[10]  M. Dickinson,et al.  The control of flight force by a flapping wing: lift and drag production. , 2001, The Journal of experimental biology.

[11]  Michael S. Selig,et al.  Reynolds number effects on the performance of small-scale propellers , 2014 .

[12]  Harro Heuser,et al.  Lehrbuch der Analysis Teil 1 , 1990 .

[13]  M. Dickinson,et al.  Biofluiddynamic scaling of flapping, spinning and translating fins and wings , 2009, Journal of Experimental Biology.

[14]  Z. J. Wang.  Aerodynamic efficiency of flapping flight: analysis of a two-stroke model , 2008, Journal of Experimental Biology.

[15]  Thomas J. Mueller,et al.  Fixed and Flapping Wing Aerodynamics for Micro Air Vehicle Applications , 2001 .

[16]  Hao Liu,et al.  Recent progress in flapping wing aerodynamics and aeroelasticity , 2010 .

[17]  Soon-Jo Chung,et al.  Optimizing the Forces and Propulsive Efficiency in Bird-Scale Flapping Flight , 2013 .

[18]  M. Triantafyllou,et al.  Oscillating foils of high propulsive efficiency , 1998, Journal of Fluid Mechanics.

[19]  C. J. Pennycuick,et al.  Modelling the Flying Bird , 2008 .

[20]  Kenneth C. Hall,et al.  Minimum induced power requirements for flapping flight , 1996, Journal of Fluid Mechanics.

[21]  Stefan Gottschalk,et al.  Aerodynamics Aeronautics And Flight Mechanics , 2016 .

[22]  David Lentink,et al.  Exploring the biofluiddynamics of swimming and flight , 2008 .

[23]  G. Sachs.  New model of flap-gliding flight. , 2015, Journal of theoretical biology.