Solvent Engineering Boosts the Efficiency of Paintable Carbon‐Based Perovskite Solar Cells to Beyond 14%

Carbon‐based hole transport material (HTM)‐free perovskite solar cells (PSCs) have shown much promise for practical applications because of their high stability and low cost. However, the efficiencies of this kind of PSCs are still relatively low, especially for the simplest paintable carbon‐based PSCs, in comparison with the organic HTM‐based PSCs. This can be imputed to the perovskite deposition methods that are not very suitable for this kind of devices. A solvent engineering strategy based on two‐step sequential method is exploited to prepare a high‐quality perovskite layer for the paintable carbon‐based PSCs in which the solvent for CH3NH3I (MAI) solution at the second step is changed from isopropanol (IPA) to a mixed solvent of IPA/Cyclohexane (CYHEX). This mixed solvent not only accelerates the conversion of PbI2 to CH3NH3PbI3 but also suppresses the Ostwald ripening process resulting in a high‐quality perovskite layer, e.g., pure phase, even surface, and compact capping layer. The paintable carbon‐based PSCs fabricated from IPA/CYHEX solvent exhibits a considerable enhancement in photovoltaic performance and performance reproducibility in comparison with that from pure IPA, especially on fill factor (FF), owing mainly to the better contact of perovskite/carbon interface, lower trap density in perovskite, higher light absorption ability, and faster charge transport of perovskite layer. As a result, the highest power conversion efficiency (PCE) of 14.38% is obtained, which is a record value for carbon‐based HTM‐free PSCs. Furthermore, a PCE of as high as 10% is achieved for the large area device (1 cm2), also the highest of its kind.

[1]  Guglielmo Lanzani,et al.  Excitons versus free charges in organo-lead tri-halide perovskites , 2014, Nature Communications.

[2]  Nam-Gyu Park,et al.  Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells. , 2014, Nature nanotechnology.

[3]  L. Etgar,et al.  Depletion region effect of highly efficient hole conductor free CH3NH3PbI3 perovskite solar cells. , 2014, Physical chemistry chemical physics : PCCP.

[4]  Long Men,et al.  Shape evolution and single particle luminescence of organometal halide perovskite nanocrystals. , 2015, ACS nano.

[5]  Teng Zhang,et al.  Cost-efficient clamping solar cells using candle soot for hole extraction from ambipolar perovskites , 2014 .

[6]  M. Grätzel,et al.  Mesoscopic photosystems for solar light harvesting and conversion: facile and reversible transformation of metal-halide perovskites. , 2014, Faraday discussions.

[7]  G. Han,et al.  Preparation of high performance perovskite-sensitized nanoporous titanium dioxide photoanodes by in situ method for use in perovskite solar cells , 2014 .

[8]  H. Han,et al.  The size effect of TiO2 nanoparticles on a printable mesoscopic perovskite solar cell , 2015 .

[9]  Nakita K. Noel,et al.  Anomalous Hysteresis in Perovskite Solar Cells. , 2014, The journal of physical chemistry letters.

[10]  Omar K. Farha,et al.  Remnant PbI2, an unforeseen necessity in high-efficiency hybrid perovskite-based solar cells?a) , 2014 .

[11]  Shahzad Ahmad,et al.  Elucidating Transport-Recombination Mechanisms in Perovskite Solar Cells by Small-Perturbation Techniques , 2014 .

[12]  Hongzheng Chen,et al.  Enhanced photovoltaic performance of CH3NH3PbI3 perovskite solar cells through interfacial engineering using self-assembling monolayer. , 2015, Journal of the American Chemical Society.

[13]  Prashant V Kamat,et al.  Best Practices in Perovskite Solar Cell Efficiency Measurements. Avoiding the Error of Making Bad Cells Look Good. , 2015, The journal of physical chemistry letters.

[14]  G. Chumanov,et al.  Fabrication of Lead Halide Perovskite Film by Controlling Reactivity at Room Temperature in Mixed Solvents , 2014 .

[15]  W. Warta,et al.  Solar cell efficiency tables (Version 45) , 2015 .

[16]  Shihe Yang,et al.  Liquid phase deposition of TiO2 nanolayer affords CH3NH3PbI3/nanocarbon solar cells with high open-circuit voltage. , 2014, Faraday discussions.

[17]  L. Etgar.  Semiconductor Nanocrystals as Light Harvesters in Solar Cells , 2013, Materials.

[18]  Henry J. Snaith,et al.  Efficient planar heterojunction perovskite solar cells by vapour deposition , 2013, Nature.

[19]  Huibiao Liu,et al.  Graphdiyne and graphyne: from theoretical predictions to practical construction. , 2014, Chemical Society reviews.

[20]  Shihe Yang,et al.  A scalable electrodeposition route to the low-cost, versatile and controllable fabrication of perovskite solar cells , 2015 .

[21]  Huawei Zhou,et al.  Hole-Conductor-Free, Metal-Electrode-Free TiO2/CH3NH3PbI3 Heterojunction Solar Cells Based on a Low-Temperature Carbon Electrode. , 2014, The journal of physical chemistry letters.

[22]  Meng Zhang,et al.  Hole selective NiO contact for efficient perovskite solar cells with carbon electrode. , 2015, Nano letters.

[23]  Wenjun Zhang,et al.  Highly efficient electron transport obtained by doping PCBM with graphdiyne in planar-heterojunction perovskite solar cells. , 2015, Nano letters.

[24]  Zhanhua Wei,et al.  Unveiling Two Electron-Transport Modes in Oxygen-Deficient TiO2 Nanowires and Their Influence on Photoelectrochemical Operation. , 2014, The journal of physical chemistry letters.

[25]  Young Chan Kim,et al.  Compositional engineering of perovskite materials for high-performance solar cells , 2015, Nature.

[26]  Kun Zhang,et al.  Retarding the crystallization of PbI2 for highly reproducible planar-structured perovskite solar cells via sequential deposition , 2014 .

[27]  Huawei Zhou,et al.  Low-Temperature Processed and Carbon-Based ZnO/CH3NH3PbI3/C Planar Heterojunction Perovskite Solar Cells , 2015 .

[28]  Yixin Zhao,et al.  Controllable Sequential Deposition of Planar CH₃NH₃PbI₃ Perovskite Films via Adjustable Volume Expansion. , 2015, Nano letters.

[29]  Nakita K. Noel,et al.  Enhanced photoluminescence and solar cell performance via Lewis base passivation of organic-inorganic lead halide perovskites. , 2014, ACS nano.

[30]  Tae-Woo Lee,et al.  Planar CH3NH3PbI3 Perovskite Solar Cells with Constant 17.2% Average Power Conversion Efficiency Irrespective of the Scan Rate , 2015, Advanced materials.

[31]  Sandeep Kumar Pathak,et al.  Ultrasmooth organic–inorganic perovskite thin-film formation and crystallization for efficient planar heterojunction solar cells , 2015, Nature Communications.

[32]  Nam-Gyu Park,et al.  Morphology-photovoltaic property correlation in perovskite solar cells: One-step versus two-step deposition of CH3NH3PbI3 , 2014 .

[33]  N. Park,et al.  Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9% , 2012, Scientific Reports.

[34]  Yun Wang,et al.  Formation Mechanism of Freestanding CH3NH3PbI3 Functional Crystals: In Situ Transformation vs Dissolution–Crystallization , 2014 .

[35]  Yanhong Luo,et al.  Pressure-assisted CH3NH3PbI3 morphology reconstruction to improve the high performance of perovskite solar cells , 2015 .

[36]  Yaoguang Rong,et al.  Full Printable Processed Mesoscopic CH3NH3PbI3/TiO2 Heterojunction Solar Cells with Carbon Counter Electrode , 2013, Scientific Reports.

[37]  Peng Gao,et al.  Mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells. , 2012, Journal of the American Chemical Society.

[38]  Qing Wang,et al.  Electrochemical impedance spectroscopic analysis of dye-sensitized solar cells. , 2005, The journal of physical chemistry. B.

[39]  Jianbin Xu,et al.  Hybrid halide perovskite solar cell precursors: colloidal chemistry and coordination engineering behind device processing for high efficiency. , 2015, Journal of the American Chemical Society.

[40]  Yang Yang,et al.  Interface engineering of highly efficient perovskite solar cells , 2014, Science.

[41]  Wen-Hau Zhang,et al.  An up-scalable approach to CH3NH3PbI3 compact films for high-performance perovskite solar cells , 2015 .

[42]  Ming Cheng,et al.  Structure engineering of hole-conductor free perovskite-based solar cells with low-temperature-processed commercial carbon paste as cathode. , 2014, ACS applied materials & interfaces.

[43]  Lioz Etgar,et al.  Depleted hole conductor-free lead halide iodide heterojunction solar cells , 2013 .

[44]  Blaise J. Thompson,et al.  Solution growth of single crystal methylammonium lead halide perovskite nanostructures for optoelectronic and photovoltaic applications. , 2015, Journal of the American Chemical Society.

[45]  Hyun Suk Jung,et al.  Highly efficient and bending durable perovskite solar cells: toward a wearable power source , 2015 .

[46]  Qingfeng Dong,et al.  Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers , 2014 .

[47]  Mohammad Khaja Nazeeruddin,et al.  Outdoor Performance and Stability under Elevated Temperatures and Long‐Term Light Soaking of Triple‐Layer Mesoporous Perovskite Photovoltaics , 2015 .

[48]  G. Cui,et al.  Graphdiyne for High Capacity and Long-Life Lithium Storage , 2015 .

[49]  H. Han,et al.  The effect of carbon counter electrodes on fully printable mesoscopic perovskite solar cells , 2015 .

[50]  A. Petrozza,et al.  Tuning the light emission properties by band gap engineering in hybrid lead halide perovskite. , 2014, Journal of the American Chemical Society.

[51]  M. Grätzel,et al.  Sequential deposition as a route to high-performance perovskite-sensitized solar cells , 2013, Nature.

[52]  Guangda Niu,et al.  Graphene oxide as dual functional interface modifier for improving wettability and retarding recombination in hybrid perovskite solar cells , 2014 .

[53]  Linfeng Liu,et al.  Efficient hole-conductor-free, fully printable mesoscopic perovskite solar cells with a broad light harvester NH2CHNH2PbI3 , 2014 .

[54]  Tae Kyu Ahn,et al.  Hysteresis-less inverted CH3NH3PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency , 2015 .

[55]  G. Chumanov,et al.  Solution-Processed Planar Perovskite Solar Cell Without a Hole Transport Layer. , 2015, ACS applied materials & interfaces.

[56]  Sang Il Seok,et al.  High-performance photovoltaic perovskite layers fabricated through intramolecular exchange , 2015, Science.

[57]  Jeannette M. Kadro,et al.  Loading of mesoporous titania films by CH3NH3PbI3 perovskite, single step vs. sequential deposition. , 2015, Chemical communications.

[58]  M. Grätzel,et al.  Title: Long-Range Balanced Electron and Hole Transport Lengths in Organic-Inorganic CH3NH3PbI3 , 2017 .

[59]  Sang Il Seok,et al.  Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. , 2014, Nature materials.

[60]  S. Pang,et al.  Crystal Morphologies of Organolead Trihalide in Mesoscopic/Planar Perovskite Solar Cells. , 2015, The journal of physical chemistry letters.

[61]  Yanhong Luo,et al.  Efficient CH3NH3PbI3 Perovskite Solar Cells Based on Graphdiyne (GD)‐Modified P3HT Hole‐Transporting Material , 2015 .

[62]  Jianbin Xu,et al.  High-performance graphene-based hole conductor-free perovskite solar cells: Schottky junction enhanced hole extraction and electron blocking. , 2015, Small.

[63]  Yanhong Luo,et al.  Free-standing flexible carbon electrode for highly efficient hole-conductor-free perovskite solar cells , 2015 .

[64]  J. Teuscher,et al.  Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites , 2012, Science.

[65]  Nripan Mathews,et al.  Low-temperature solution-processed wavelength-tunable perovskites for lasing. , 2014, Nature materials.

[66]  Kai Zhu,et al.  Charge Transport and Recombination in Perovskite (CH3NH3)PbI3 Sensitized TiO2 Solar Cells , 2013 .

[67]  M. Grätzel,et al.  A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability , 2014, Science.

[68]  Laura M. Herz,et al.  Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber , 2013, Science.

[69]  Yanhong Luo,et al.  An all-carbon counter electrode for highly efficient hole-conductor-free organo-metal perovskite solar cells , 2014 .

[70]  Shuzi Hayase,et al.  Improved understanding of the electronic and energetic landscapes of perovskite solar cells: high local charge carrier mobility, reduced recombination, and extremely shallow traps. , 2014, Journal of the American Chemical Society.

[71]  Omer Yaffe,et al.  Trap states in lead iodide perovskites. , 2015, Journal of the American Chemical Society.

[72]  Juan Bisquert,et al.  Low-temperature processed electron collection layers of graphene/TiO2 nanocomposites in thin film perovskite solar cells. , 2013, Nano letters.

[73]  K. Cao,et al.  Efficient mesoscopic perovskite solar cells based on the CH3NH3PbI2Br light absorber , 2015 .

[74]  Tsutomu Miyasaka,et al.  Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.