A novel “sandwich” method for observation of the keyhole in deep penetration laser welding

Abstract A sandwich method was used to observe the keyhole in deep penetration laser welding, which provided an effective way to analyze both the Fresnel and inverse Bremsstrahlung absorption. In the transparent metal-analog system, different densities of metal vapor, ionized atoms, and free electrons in the keyhole can be simulated by changing the thickness of aluminum films. The research results show that inverse Bremsstrahlung absorption exerts a tremendous influence on the energy absorption of the laser beam for CO 2 laser welding. Low density of keyhole plasma benefits the incident laser energy coupling to the materials. However, excess density of keyhole plasma baffles the transmission of the incident laser beam to the interior material. By comparing inflow energy and outflow energy, there exits an energy balance on the keyhole wall by balancing the absorbed laser intensity and heat flux on the wall.

[1]  Remy Fabbro,et al.  Keyhole description in deep-penetration laser welding , 2000, Advanced High-Power Lasers and Applications.

[2]  Yi Zhang,et al.  Spectroscopic measurements of plasma inside the keyhole in deep penetration laser welding , 2005 .

[3]  Naoki Seto,et al.  Dynamics of keyhole and molten pool in high-power CO2 laser welding , 2000, Advanced High-Power Lasers and Applications.

[4]  Xudong Zhang,et al.  Penetration monitoring and control of CO2 laser welding with coaxial visual sensing system , 2005, SPIE/COS Photonics Asia.

[5]  Seiji Katayama,et al.  Mechanism of pore formation during keyhole laser spot welding , 2003, International Congress on Laser Advanced Materials Processing.

[6]  Thomas Graf,et al.  Multiple reflections and Fresnel absorption in an actual 3D keyhole during deep penetration laser welding , 2006 .

[7]  R. Fabbro,et al.  Dynamical description of the keyhole in deep penetration laser welding , 2000 .

[8]  D. Grevey,et al.  Characterisation of cw Nd : YAG laser keyhole dynamics , 2001 .

[9]  E. Amara,et al.  Modelling of vapour flow in deep penetration laser welding , 2002 .

[10]  Seiji Katayama,et al.  Analysis of different methods for the prevention of pore formation in keyhole laser spot welding , 2002 .

[11]  J. Jones,et al.  Optical techniques for real-time penetration monitoring for laser welding. , 2005, Applied optics.

[12]  Xiangzhong Jin,et al.  A study on fresnel absorption and reflections in the keyhole in deep penetration laser welding , 2002 .

[13]  R. Fabbro,et al.  Modeling of the compressible vapor flow induced in a keyhole during laser welding , 2003 .

[14]  Seiji Katayama,et al.  Unbounded keyhole collapse and bubble formation during pulsed laser interaction with liquid zinc , 2002 .

[15]  C. Ho,et al.  Distribution of the intensity absorbed by the keyhole wall in laser processing , 2004 .

[16]  Seiji Katayama,et al.  Observation of molten metal behavior during laser irradiation: basic experiment to understand laser welding phenomena , 2003, International Congress on Laser Advanced Materials Processing.

[17]  S. Ko,et al.  Mechanism of keyhole formation and stability in stationary laser welding , 2002 .

[18]  Etsuji Ohmura,et al.  Dynamic behavior of plume and keyhole in CO2 laser welding , 1997 .

[19]  Pablo Solana,et al.  A study of the effect of multiple reflections on the shape of the keyhole in the laser processing of materials , 1997 .

[20]  R. Fabbro,et al.  Keyhole modeling during laser welding , 2000 .

[21]  Suck-Joo Na,et al.  Implementation of real-time multiple reflection and Fresnel absorption of laser beam in keyhole , 2006 .

[22]  J. Mazumder,et al.  Experimental study on keyhole and melt pool dynamics in laser welding , 1997 .