Abstract This paper summarizes two new satellite impact experiments. The objective of the experiments was to investigate the outcome of low- and hyper-velocity impacts on two identical target satellites. The first experiment was performed at a low-velocity of 1.5 km/s using a 40-g aluminum alloy sphere. The second experiment was performed at a hyper-velocity of 4.4 km/s using a 4-g aluminum alloy sphere. The target satellites were 15 cm × 15 cm × 15 cm in size and 800 g in mass. The ratios of impact energy to target mass for the two experiments were approximately the same. The target satellites were completely fragmented in both experiments, although there were some differences in the characteristics of the fragments. The projectile of the low-velocity impact experiment was partially fragmented while the projectile of the hyper-velocity impact experiment was completely fragmented beyond recognition. To date, approximately 1500 fragments from each impact experiment have been collected for detailed analysis. Each piece has been weighed, measured, and analyzed based on the analytic method used in the NASA Standard Breakup Model (2000 revision). These fragments account for about 95% of the target mass for both impact experiments. Preliminary analysis results will be presented in this paper.
[1]
S.-Y. Su,et al.
The velocity distribution of collisional fragments and its effect on future space debris environment
,
1990
.
[2]
Toshiya Hanada,et al.
Low-velocity catastrophic impact on micro satellite
,
2005
.
[3]
N. Johnson,et al.
NASA's new breakup model of evolve 4.0
,
2001
.
[4]
P. H. Krisko,et al.
The new NASA orbital debris breakup model
,
2002
.
[5]
Darren McKnight.
Determination of breakup initial conditions
,
1991
.
[6]
Simon F. Green,et al.
Dust in the Solar System and Other Planetary Systems
,
2002
.
[7]
Hiroshi Hirayama,et al.
LOW-VELOCITY PROJECTILE IMPACT ON SPACECRAFT☆
,
2000
.
[8]
Hidehiro Hata,et al.
Using NASA Standard Breakup Model to Describe Low-Velocity Impacts on Spacecraft
,
2005
.