DFIG Machine Design for Maximizing Power Output Based on Surrogate Optimization Algorithm

This paper presents a surrogate-model-based optimization of a doubly-fed induction generator (DFIG) machine winding design for maximizing power yield. Based on site-specific wind profile data and the machine's previous operational performance, the DFIG's stator and rotor windings are optimized to match the maximum efficiency with operating conditions for rewinding purposes. The particle swarm optimization-based surrogate optimization techniques are used in conjunction with the finite element method to optimize the machine design utilizing the limited available information for the site-specific wind profile and generator operating conditions. A response surface method in the surrogate model is developed to formulate the design objectives and constraints. Besides, the machine tests and efficiency calculations follow IEEE standard 112-B. Numerical and experimental results validate the effectiveness of the proposed technologies.

[1]  Ieee Standards Board.  IEEE standard test procedure for polyphase induction motors and generators , 1992 .

[2]  K.J. Bradley,et al.  Evaluation of additional loss in induction motors, consequent upon repair and rewinding , 2004, The 4th International Power Electronics and Motion Control Conference, 2004. IPEMC 2004..

[3]  Farrokh Mistree,et al.  Kriging Models for Global Approximation in Simulation-Based Multidisciplinary Design Optimization , 2001 .

[4]  T. Simpson,et al.  A Study on the Use of Kriging Models to Approximate Deterministic Computer Models , 2003, DAC 2003.

[5]  Paula Fonseca,et al.  Characterization of EU Motor Use , 2000 .

[6]  Jon Clare,et al.  Doubly fed induction generator using back-to-back PWM converters and its application to variable-speed wind-energy generation , 1996 .

[7]  T.G. Habetler,et al.  A useful multi-objective optimization design method for PM motors considering nonlinear material properties , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[8]  Wei Xu,et al.  Multiobjective Sequential Optimization Method for the Design of Industrial Electromagnetic Devices , 2012, IEEE Transactions on Magnetics.

[9]  M. Stein.  Large sample properties of simulations using latin hypercube sampling , 1987 .

[10]  Hengchang Feng,et al.  Comparative Research on Methods of Calculating Weibull Distribution Parameters of Wind Speed , 2011, 2011 Asia-Pacific Power and Energy Engineering Conference.

[11]  Li Jun-qing,et al.  FEM analysis on interturn fault of rotor wingding in DFIG , 2013, 2013 International Conference on Electrical Machines and Systems (ICEMS).

[12]  Hyun-Kyo Jung,et al.  Optimal design of ultrasonic motor using evolution strategy and finite element method , 2007 .

[13]  P. Kundur,et al.  Power system stability and control , 1994 .

[14]  Wenping Cao,et al.  Assessing the impacts of rewind and repeated rewinds on induction motors: is an opportunity for Re-designing the machine being wasted? , 2005, IEEE Transactions on Industry Applications.

[15]  R. Wrobel,et al.  Particle Swarm Optimisation for the Design of Brushless Permanent Magnet Machines , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[16]  T. Thiringer,et al.  Evaluation of current control methods for wind turbines using doubly-fed induction machines , 2005, IEEE Transactions on Power Electronics.

[17]  Sasa Z. Djokic,et al.  Assessment of renewable wind resources in UK urban areas , 2010, Melecon 2010 - 2010 15th IEEE Mediterranean Electrotechnical Conference.

[18]  Raphael T. Haftka,et al.  Surrogate Model-Based Optimization Framework: A Case Study in Aerospace Design , 2007, Evolutionary Computation in Dynamic and Uncertain Environments.

[19]  Riccardo Poli,et al.  Particle swarm optimization , 1995, Swarm Intelligence.

[20]  R. G. Harley,et al.  A Novel Method for Multiobjective Design and Optimization of Three Phase Induction Machines , 2011, IEEE Transactions on Industry Applications.

[21]  F. Cupertino,et al.  FEA-based multi-objective optimization of IPM motor design including rotor losses , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[22]  Lee W. Schruben,et al.  A survey of simulation optimization techniques and procedures , 2000, 2000 Winter Simulation Conference Proceedings (Cat. No.00CH37165).

[23]  Richard J. Beckman,et al.  A Comparison of Three Methods for Selecting Values of Input Variables in the Analysis of Output From a Computer Code , 2000, Technometrics.