Aluminium nitride films on glass

Purpose of this work is to realize AlN films with preferred crystal orientation on a magnetron sputtering system at different pressure values, in particular towards low-pressure gas discharge operative range, where few data are available in literature. In this respect, explored operative pressures have been 0.07 and 0.12 Pa, together with the more common values of 0.3 and 0.7 Pa. Reactive Ar-N2 mixtures (50%-50% and 0%-100%) and a DC-pulsed power supply have been used, and films have been deposited on glass substrate. Films thicknesses have been measured with surface profiler, and XRD analyses have been performed. Experimental data are presented; the best results with respect to adhesion, deposition rate and film crystallinity with the same deposition time have been obtained with mixtures 50% Ar - 50% N2 at 0.12 and 0.3 Pa.

[1]  Robert Schulze,et al.  Pulsed DC magnetron sputtered piezoelectric thin film aluminum nitride – Technology and piezoelectric properties , 2014 .

[2]  D. Desideri,et al.  Characterisation of copper thin films deposited on machinable glass-ceramic and glass by DC magnetron sputtering , 2014 .

[3]  Wen Zhiyu,et al.  The fabrication of vibration energy harvester arrays based on AlN piezoelectric film , 2013 .

[4]  温志渝,et al.  The fabrication of vibration energy harvester arrays based on AIN piezoelectric film , 2013 .

[5]  S. Priya,et al.  Piezoelectric MEMS for energy harvesting , 2012 .

[6]  D. Desideri,et al.  Characterization of nanostructured copper films for electromagnetic shield , 2012 .

[7]  S. Scorcioni,et al.  AlN-based MEMS devices for vibrational energy harvesting applications , 2011, 2011 Proceedings of the European Solid-State Device Research Conference (ESSDERC).

[8]  Bernhard Wagner,et al.  AlN-based piezoelectric micropower generator for low ambient vibration energy harvesting , 2011 .

[9]  G. Stan,et al.  HIGHLY TEXTURED ( 001 ) AlN NANOSTRUCTURED THIN FILMS SYNTHESIZED BY REACTIVE MAGNETRON SPUTTERING FOR SAW AND FBAR APPLICATIONS , 2010 .

[10]  Ruey-Shing Huang,et al.  Deposition and characterization of reactive magnetron sputtered aluminum nitride thin films for film bulk acoustic wave resonator , 2007 .

[11]  Omar Elmazria,et al.  Deposition of Aluminium Nitride Film by Magnetron Sputtering for Diamond‐Based Surface Acoustic Wave Applications , 2002 .

[12]  Paul Muralt,et al.  Stress and piezoelectric properties of aluminum nitride thin films deposited onto metal electrodes by pulsed direct current reactive sputtering , 2001 .

[13]  Jagdish Narayan,et al.  Structural characteristics of AlN films deposited by pulsed laser deposition and reactive magnetron sputtering: A comparative study , 1998 .