Multi-actuated functionally graded piezoelectric micro-tools design using topology optimization

The micro-tools considered in this work consist essentially of multi-flexible structures actuated by two or more piezoceramic devices that must generate different output displacements and forces at different specified points of the domain and on different directions. The multiflexible structure acts as a mechanical transformer by amplifying and changing the direction of the piezoceramics output displacements. Micro-tools offer significant promise in a wide range of applications such as cell manipulation, microsurgery, and micro/nanotechnology processes. Although the design of these micro-tools is complicated due to the coupling among movements generated by various piezoceramics, it can be realized by means of topology optimization concepts. Recently, the concept of functionally graded materials (FGMs) has been explored in piezoelectric materials to improve performance and increase lifetime of piezoelectric actuators. Usually for an FGM piezoceramic, elastic, piezoelectric, and dielectric properties are graded along the thickness. Thus, the objective of this work is to study the influence of piezoceramic property gradation in the design of the multiflexible structures of piezoelectric micro-tools using topology optimization. The optimization problem is posed as the design of a flexible structure that maximizes different output displacements or output forces in different specified directions and points of the domain, in response to different excited piezoceramic portions: while minimizing the effects of movement coupling. The method is implemented based on the solid isotropic material with penalization (SIMP) model where fictitious densities are interpolated in each finite element, providing a continuum material distribution in the domain. As examples, designs of a single piezoactuator and an XY nano-positioner actuated by two FGM piezoceramics are considered. The resulting designs are compared with designs considering homogeneous piezoceramics. The present examples are limited to two-dimensional models because most of the applications for such micro-tools are planar devices.

[1]  K. Matsui,et al.  Continuous approximation of material distribution for topology optimization , 2004 .

[2]  Reinhardlerch.  Simulation of Piezoelectric Devices by Two- and Three-Dimensional Finite Elements , 2000 .

[3]  Arianna Menciassi,et al.  Force sensing microinstrument for measuring tissue properties and pulse in microsurgery , 2003 .

[4]  N. Kikuchi,et al.  Topology optimization design of flextensional actuators , 2000, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[5]  S. Rahmatalla,et al.  A Q4/Q4 continuum structural topology optimization implementation , 2004 .

[6]  Markus J. Buehler,et al.  Topology Optimization of Smart Structures Using a Homogenization Approach , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[7]  G. Paulino,et al.  ISOPARAMETRIC GRADED FINITE ELEMENTS FOR NONHOMOGENEOUS ISOTROPIC AND ORTHOTROPIC MATERIALS , 2002 .

[8]  Garret N. Vanderplaats,et al.  Numerical Optimization Techniques for Engineering Design: With Applications , 1984 .

[9]  J.-M. Breguet,et al.  A smart microrobot on chip: design, identification, and control , 2004, IEEE/ASME Transactions on Mechatronics.

[10]  Frank Claeyssen,et al.  Mechanisms based on piezoactuators , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[11]  Steven W. Hudnut,et al.  Analysis of out-of-plane displacement and stress field in a piezocomposite plate with functionally graded microstructure , 2001 .

[12]  Shinji Nishiwaki,et al.  Design of piezoelectric multi-actuated microtools using topology optimization , 2005 .

[13]  Fumihito Arai,et al.  Micro mechatronics and micro actuators , 1996 .

[14]  N. Kikuchi,et al.  Optimal structural design considering flexibility , 2001 .

[15]  R. Lerch,et al.  Simulation of piezoelectric devices by two- and three-dimensional finite elements , 1990, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[16]  Shi Zhi-fei.  General solution of a density functionally gradient piezoelectric cantilever and its applications , 2002 .

[17]  M. Buehler,et al.  Topology Optimization of Smart Structures Using a Homogenization Approach , 2004 .

[18]  S. Suresh,et al.  Fundamentals of functionally graded materials , 1998 .

[19]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .