Design and Experimental Analysis of an Exhaust Air Energy Recovery Wind Turbine Generator

A vertical axis wind turbine (VAWT) was positioned at the discharge outlet of a cooling tower electricity generator. To avoid a negative impact on the performance of the cooling tower and to optimize the turbine performance, the determination of the VAWT position in the discharge wind stream was conducted by experiment. The preferable VAWT position is where the higher wind velocity matches the positive torque area of the turbine rotation. With the proper matching among the VAWT configurations (blade number, airfoil type, operating tip-speed-ratio, etc. ) and exhaust air profile, the turbine system was not only able to recover the wasted kinetic energy, it also reduced the fan motor power consumption by 4.5% and increased the cooling tower intake air flow-rate by 11%. The VAWT had a free running rotational speed of 479 rpm, power coefficient of 10.6%, and tip-speed-ratio of 1.88. The double multiple stream tube theory was used to explain the VAWT behavior in the non-uniform wind stream. For the actual size of a cooling tower with a 2.4 m outlet diameter and powered by a 7.5 kW fan motor, it was estimated that a system with two VAWTs (side-by-side) can generate 1 kW of power which is equivalent to 13% of energy recovery.

[1]  Ravinder Singh,et al.  Design of Domestic Helix Vertical Axis Wind Turbine to Extract Energy from Exhaust Fans , 2014 .

[2]  Wen Tong Chong,et al.  The design, simulation and testing of an urban vertical axis wind turbine with the omni-direction-guide-vane , 2013 .

[3]  Wen Tong Chong,et al.  Performance investigation of a power augmented vertical axis wind turbine for urban high-rise application , 2013 .

[4]  Yuji Ohya,et al.  A Shrouded Wind Turbine Generating High Output Power with Wind-lens Technology , 2010 .

[5]  M. F. Jentsch,et al.  Vertical axis resistance type wind turbines for use in buildings , 2009 .

[6]  Kaveh Madani,et al.  World Energy Balance Outlook and OPEC Production Capacity: Implications for Global Oil Security , 2012 .

[7]  Feng Liu,et al.  Key manufacturing technology & equipment for energy saving and emissions reduction in mechanical equipment industry , 2012 .

[8]  Suhaidi Shafie,et al.  Current perspective of the renewable energy development in Malaysia , 2011 .

[9]  Wen Tong Chong,et al.  The experimental study on the wind turbine’s guide-vanes and diffuser of an exhaust air energy recovery system integrated with the cooling tower , 2014 .

[10]  Tim Sharpe,et al.  Crossflex: Concept and early development of a true building integrated wind turbine , 2010 .

[11]  M. Gharib,et al.  Efficiency improvement of straight-bladed vertical-axis wind turbines with an upstream deflector , 2013 .

[12]  Yingxue Yao,et al.  Double Multiple Streamtube Model and Numerical Analysis of Vertical Axis Wind Turbine , 2011 .

[13]  Corinne Le Quéré,et al.  Climate Change 2013: The Physical Science Basis , 2013 .

[14]  I. Paraschivoiu,et al.  Double-multiple streamtube model for Darrieus in turbines , 1981 .

[15]  Masaru Nakano,et al.  Integrated Simulation Model for Energy Security Evaluation , 2012 .

[16]  Junfeng Hu,et al.  Experimental investigation into the influence of the flanged diffuser on the dynamic behavior of CFRP blade of a shrouded wind turbine , 2015 .

[17]  Shi-qiang Chen,et al.  Experimental investigation on the energy-saving diffuser of a main fan , 2012 .

[18]  Tianli Zhao,et al.  Understanding the Plunge in Oil Prices: Sources and Implications , 2015 .

[19]  Mohsen Kalantar,et al.  Dynamic behavior of a stand-alone hybrid power generation system of wind turbine, microturbine, solar array and battery storage , 2010 .

[20]  R. Schaeffer,et al.  Energy sector vulnerability to climate change: A review , 2012 .

[21]  You Sik Shin,et al.  Water cooling characteristics in an enclosed vacuum tank by water driven ejector , 2005 .

[22]  Ahmad Badarudin Bin Mohamad Badry,et al.  Performance investigation of a power augmented vertical axis wind turbine for urban high-rise application. , 2012 .