A micro-power CMOS RF front-end for embedded wireless devices

Motivated by the emerging needs for low power narrow-band wireless communication systems, the first micro-power RFIC front-end has been designed using weak inversion CMOS techniques. The front-end, a low-noise amplifier (LNA) combined with a downconversion mixer, has been implemented in a standard 0.8 /spl mu/m CMOS process. The front-end supply current is less than 110 /spl mu/A at 3 V supply bias for operation at 450 MHz. High-Q inductors, used in the front-end design, have been manufactured using low-temperature cofired ceramic technology. The front-end's gain is 25 dB with an IP3 of -15 dBm. This is the lowest current consumption reported to date for a CMOS front-end operating at this frequency.

[1]  Michiel Steyaert,et al.  A 1.8-GHz low-phase-noise CMOS VCO using optimized hollow spiral inductors , 1997, IEEE J. Solid State Circuits.

[2]  S. Vasudevan,et al.  Microwave characterization of low temperature cofired ceramic system , 1997, Proceedings 3rd International Symposium on Advanced Packaging Materials Processes, Properties and Interfaces.

[3]  William J. Kaiser,et al.  Micropower CMOS RF components for distributed wireless sensors , 1998, 1998 IEEE Radio Frequency Integrated Circuits (RFIC) Symposium. Digest of Papers (Cat. No.98CH36182).

[4]  Gregory J. Pottie,et al.  Low power systems for wireless microsensors , 1996, Proceedings of 1996 International Symposium on Low Power Electronics and Design.

[5]  Asad A. Abidi,et al.  Low-power radio-frequency ICs for portable communications , 1995, Proc. IEEE.

[6]  G. Asada,et al.  Wireless integrated network sensors: Low power systems on a chip , 1998, Proceedings of the 24th European Solid-State Circuits Conference.