Comparison between Two Different Pluviation Setups of Sand Specimens
暂无分享,去创建一个
Ehsan Seyedi Hosseininia | Abdolah Tabaroei | Saeed Abrishami | E. S. Hosseininia | S. Abrishami | A. Tabaroei
[1] S. M. Dasaka,et al. Assessment of portable traveling pluviator to prepare reconstituted sand specimens , 2012 .
[2] D. Negussey,et al. Preparation of Reconstituted Sand Specimens , 1988 .
[3] Mehmet T. Tumay,et al. Preparation of a Large Size Granular Specimen Using a Rainer System with a Porous Plate , 2010 .
[4] Jean-Lou Chameau,et al. Polymer Impregnation to Assist Undisturbed Sampling of Cohesionless Soils , 1996 .
[5] B. S. Siah,et al. A Laboratory Method of Measuring In-Situ Density Distribution in Dry Sand , 1979 .
[6] S. M. Dasaka,et al. Development of a Mechanized Traveling Pluviator to Prepare Reconstituted Uniform Sand Specimens , 2016 .
[7] C. Hariprasad,et al. Preparation of Uniform Sand Specimens Using Stationary Pluviation and Vibratory Methods , 2016, Geotechnical and Geological Engineering.
[8] R. Butterfield,et al. An Air Activated Sand Spreader for Forming Uniform Sand Beds , 1970 .
[9] P. Knodel,et al. Maximum Dry Density of Cohesionless Soils by Pluviation and by ASTM D 4253-83: A Comparative Study , 1992 .
[10] Yoginder P. Vaid,et al. SAND SAMPLE PREPARATION-THE SLURRY DEPOSITION METHOD , 1988 .
[11] K. Lee,et al. Experimental and numerical studies of geosynthetic-reinforced sand slopes loaded with a footing , 2000 .
[12] D. Presti,et al. A New Traveling Sand Pluviator to Reconstitute Specimens of Well-Graded Silty Sands , 1993 .
[13] Rocco Lagioia,et al. AIR, WATER AND VACUUM PLUVIATION OF SAND SPECIMENS FOR THE TRIAXIAL APPARATUS , 2006 .
[14] A. Huang,et al. CALIBRATION OF CONE PENETRATION TEST IN SAND , 1999 .
[15] R. Bellotti,et al. Uniformity Tests in Calibration Chamber Samples by the Thermal Probe Method , 1991 .
[16] Anand J. Puppala,et al. Cone Penetration in Very Weakly Cemented Sand , 1995 .
[17] C.R.I. Clayton,et al. A resin impregnation technique for the determination of the density variations in completed specimens of dry cohesionless soil , 1994 .
[18] Vp Drnevich,et al. Chemical Impregnation of Cohesionless Soils , 1989 .
[19] Evon M. O. Abu-Taieh,et al. Comparative Study , 2020, Definitions.
[20] B. P. Walker,et al. An Apparatus for Forming Uniform Beds of Sand for Model Foundation Tests , 1967 .
[21] Ashraf K. Nazir,et al. Behavior of Eccentrically Loaded Small-Scale Ring Footings Resting on Reinforced Layered Soil , 2012 .
[22] A. W. Cresswell,et al. Determining the maximum density of sands by pluviation , 1999 .
[23] Priyanka Ghosh,et al. Optimization and Parametrical Investigation to Assess the Reconstitution of Different Types of Indian Sand Using Portable Travelling Pluviator , 2016, Geotechnical and Geological Engineering.
[24] 土岐 祥介,et al. A SAMPLE PREPARATION METHOD AND ITS EFFECT ON STATIC AND CYCLIC DEFORMATION-STRENGTH PROPERTIES OF SAND , 1982 .
[25] Hj Pincus,et al. A Pluvial Deposition Method to Reconstitute Well-Graded Sand Specimens , 1995 .
[26] N S Rad,et al. FACTORS AFFECTING SAND SPECIMEN PREPARATION BY RAINING , 1987 .
[27] M C Gemperline,et al. CENTRIFUGAL MODEL TESTS FOR ULTIMATE BEARING CAPACITY OF FOOTINGS ON STEEP SLOPES IN COHESIONLESS SOILS , 1985 .
[28] H. G. Stuit,et al. Sand in the geotechnical centrifuge , 1995 .
[29] 諸戸 靖史,et al. RELATIVE DENSITY OF PLUVIATED SAND SAMPLES , 1985 .