Development of magnetic flux leakage technique for examination of steam generator tubes of prototype fast breeder reactor

Abstract For non-destructive examination of small diameter (outer diameter, OD 17.2 mm) and thick walled (wall thickness, 2.3 mm) ferromagnetic Modified 9Cr–1Mo steel steam generator (SG) tubes of Prototype Fast Breeder Reactor (PFBR), this paper proposes magnetic flux leakage (MFL) technique. Three dimensional finite element (3D-FE) modeling has been performed to optimize the magnetizing unit and inter-coil spacing of bobbin coils used for axial magnetization of the tube. The performance of the technique has been evaluated experimentally by measuring the axial ( B a ) component of the leakage fields from localized machined defects in SG tubes. The MFL technique has shown capability to detect and image tube outside defects with a signal-to-noise ratio (SNR) better than 6 dB. Study reveals that Inconel support plates surrounding the SG tubes do not influence the MFL signals. As the MFL technique can detect localized defects in the presence of support plates as well as sodium and the remote field eddy current technique is sensitive to distributed wall thinning, their combined use will ensure comprehensive inspection of the SG tubes.

[1]  David Jiles,et al.  Review of magnetic methods for nondestructive evaluation (Part 2) , 1990 .

[2]  T. Jayakumar,et al.  Flexible GMR Sensor Array for Magnetic Flux Leakage Testing of Steel Track Ropes , 2012, J. Sensors.

[3]  Gui Yun Tian,et al.  Pulsed electromagnetic methods for defect detection and characterisation , 2007 .

[4]  Minhhuy Le,et al.  Integration of Hall and Giant Magnetoresistive Sensor Arrays for Real-Time 2-D Visualization of Magnetic Field Vectors , 2012, IEEE Transactions on Magnetics.

[5]  Zhiwei Zeng,et al.  A GMR-Based Eddy Current System for NDE of Aircraft Structures , 2006, IEEE Transactions on Magnetics.

[6]  Masashi Ueda,et al.  Signal processing schemes for Eddy Current Testing of steam generator tubes of nuclear power plants , 2012 .

[7]  Baldev Raj,et al.  Detection of leakage magnetic flux from near-side and far-side defects in carbon steel plates using a giant magneto-resistive sensor , 2008 .

[8]  N. Takahashi,et al.  Three-Dimensional FEM Analysis of Electromagnetic Inspection of Outer Side Defects on Steel Tube Using Inner Coil , 2007, IEEE Transactions on Magnetics.

[9]  Jens Haueisen,et al.  Sensitivity analysis of the non-destructive evaluation of micro-cracks using GMR sensors , 2014 .

[10]  R. C. Mcmaster.  Nondestructive testing handbook , 1959 .

[11]  Lynann Clapham,et al.  Residual Magnetic Flux Leakage: A Possible Tool for Studying Pipeline Defects , 2003 .

[12]  P. Chellapandi,et al.  The design of the prototype Fast Breeder Reactor , 2006 .

[13]  David Jiles,et al.  Review of magnetic methods for nondestructive evaluation , 1988 .

[14]  T. A. Bubenik,et al.  Magnetic flux leakage (MFL) technology for natural gas pipeline inspection. Topical report, November 1992 , 1992 .

[15]  Gui Yun Tian,et al.  Pulsed magnetic flux leakage techniques for crack detection and characterisation , 2006 .

[16]  Baldev Raj,et al.  Techniques for processing remote field eddy current signals from bend regions of steam generator tubes of prototype fast breeder reactor , 2011 .

[17]  Baldev Raj,et al.  Influence of sodium deposits in steam generator tubes on remote field eddy current signals , 2008 .

[18]  Longjiang Deng,et al.  Sensors development using its unusual properties of Fe/Co-based amorphous soft magnetic wire , 2005 .

[19]  T. Jayakumar,et al.  Materials development for fast reactor applications , 2013 .