Performance study of a packed bed in a closed loop thermal energy storage system

In order to reduce the cost of thermal energy recovery, a packed bed closed loop thermal energy storage system has been proposed and is investigated. The main components of the system include a closed air cycle, a heat exchanger, and a packed bed storage column. This paper is aimed at analyzing the performance of the packed bed in the system. Packed bed column experiments have been carried out to provide a basic understanding of the thermal energy storage process in the closed loop system with different flow directions in the packed bed and different energy storage temperatures. The detailed temperature distributions in the interior of the packed bed and the temperature differences along the axial and radial directions are presented. The influence of flow direction within the packed bed and structure of the gas distributer on the temperature distribution are also analyzed. The performance of packed beds in the closed loop thermal energy storage system is then evaluated based on energy and exergy analyses. These experimental results would be useful in the optimal design of the structure of packed bed columns and thus closed loop thermal energy storage systems.

[1]  Luisa F. Cabeza,et al.  State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization , 2010 .

[2]  J. Pacheco,et al.  DEVELOPMENT OF A MOLTEN-SALT THERMOCLINE THERMAL STORAGE SYSTEM FOR PARABOLIC TROUGH PLANTS , 2001 .

[3]  D. Fernandes,et al.  Thermal energy storage: “How previous findings determine current research priorities” , 2012 .

[4]  Hiromoto Usui,et al.  Turbulent flow in a spray drying chamber , 1985 .

[5]  Luisa F. Cabeza,et al.  State of the art on high-temperature thermal energy storage for power generation. Part 2--Case studies , 2010 .

[6]  T. Rainer,et al.  Advances in thermal energy storage development at the German Aerospace Center (DLR) , 2012 .

[7]  Ibrahim Dincer,et al.  Performance analyses of sensible heat storage systems for thermal applications , 1997 .

[8]  Gerhart Eigenberger,et al.  Gas flow and heat transfer through catalyst filled tubes , 2001 .

[9]  David Parker,et al.  Solids behaviour in a gas–solid two-phase mixture flowing through a packed particle bed , 2005 .

[10]  David F. Fletcher,et al.  Simulation of Gas Flow Instability in a Spray Dryer , 2003 .

[11]  Moh’d A. Al-Nimr,et al.  Dynamic behaviour of a packed bed energy storage system , 1996 .

[12]  Rahman Saidur,et al.  Energy, exergy and environmental analysis of cold thermal energy storage (CTES) systems , 2012 .

[13]  John W. Kelton,et al.  Testing of Thermocline Filler Materials and Molten-Salt Heat Transfer Fluids for Thermal Energy Storage Systems in Parabolic Trough Power Plants , 2004 .

[14]  D. Kearney,et al.  Survey of Thermal Energy Storage for Parabolic Trough Power Plants , 2002 .

[15]  Simeon H. Taole,et al.  Experimental volumetric heat transfer characteristics between oil and glass pebbles in a small glass tube storage , 2010 .

[16]  R. Saini,et al.  A review on packed bed solar energy storage systems , 2010 .

[17]  S. M. Hasnain.  Review on sustainable thermal energy storage technologies, Part I: heat storage materials and techniques , 1998 .

[18]  E. Achenbach.  Heat and flow characteristics of packed beds , 1993 .