论文信息 - A finite element approach to calculate corona losses on bipolar DC transmission lines

A finite element approach to calculate corona losses on bipolar DC transmission lines

The corona power loss is a major consideration in the design of transmission lines. In the present paper, a finite element method with a charge simulation method was used to calculate the corona power loss in a bipolar dc transmission line configuration. From the simulated results, it can be concluded that the corona power loss decreases with an increase of conductor radius and bundle height above the ground. The simulated results show satisfactory agreement with measured values when the parameters are properly chosen.

Xingliang Jiang | Fanghui Yin | Masoud Farzaneh

[1] Mazen Abdel-Salam,et al. Finite-element analysis of monopolar ionized fields including ion diffusion , 1993 .

[2] Zakariya Al-Hamouz,et al. Corona power loss, electric field, and current density profiles in bundled horizontal and vertical bipolar conductors , 2002 .

[3] Zhong-Xin Li,et al. Numerical Calculations of Monopolar Corona From the Bare Bundle Conductors of HVDC Transmission Lines , 2009, IEEE Transactions on Power Delivery.

[4] Gang Chen,et al. Numerical calculation of the negative onset corona voltage of high-voltage direct current bare overhead transmission conductors , 2010 .

[5] Mazen Abdel-Salam,et al. Analysis of monopolar ionized field as influenced by ion diffusion , 1993 .

[6] Giovanni Ghione,et al. New analytical approach for computing DC unipolar corona losses , 1984 .

[7] Yin Yu,et al. Corona Onset Voltage of Bipolar Bundle Conductors of HVDC Transmission Line , 2011, IEEE Transactions on Power Delivery.

[8] Jinliang He,et al. Analysis of ion flow field of UHV/EHV AC transmission lines , 2013, IEEE Transactions on Dielectrics and Electrical Insulation.