Analysis on microstructure and mechanical properties of Ti-47.5Al-3Nb-1.5Cr alloy through heat-treatment

[1]  A. Shaaban,et al.  Effects of the addition of transition metals on phase equilibria and phase transformations in TiAl systems in between 1473 and 1073 K , 2021 .

[2]  H. Clemens,et al.  Influence of Nb on Ti diffusion in γ-TiAl intermetallics studied by mechanical spectroscopy , 2021, Journal of Alloys and Compounds.

[3]  P. Peng,et al.  Growth velocity and microhardness dependences of intermetallic compound phases on solubility range during peritectic solidification , 2021 .

[4]  Guang Yang,et al.  Hot tensile behavior of a TiAl alloy with a (β0 + γ) microduplex microstructure prepared simply by heat treatments , 2021 .

[5]  A. Chiba,et al.  Effect of multi-stage heat treatment on mechanical properties and microstructure transformation of Ti–48Al–2Cr–2Nb alloy , 2021 .

[6]  C. Shen,et al.  Fabrication of γ-TiAl intermetallic alloy using the twin-wire plasma arc additive manufacturing process: Microstructure evolution and mechanical properties , 2021 .

[7]  Ruirun Chen,et al.  Phase transformation and microstructure evolution of a beta-solidified gamma-TiAl alloy , 2021 .

[8]  Vajinder Singh,et al.  Effects of Cr alloying on the evolution of solidification microstructure and phase transformations of high-Nb containing γ-TiAl based alloys , 2021 .

[9]  Xin Lu,et al.  Fabrication of TiAl alloys turbocharger turbine wheel for engines by metal injection molding , 2021 .

[10]  P. Peng,et al.  Phase selection and nano-mechanical properties of intermetallic compounds in directionally solidified Cu-68at.%Sn peritectic alloy , 2020 .

[11]  Yuyong Chen,et al.  Microscale investigation of perovskite-Ti3AlC strengthening and plastic deformation in high niobium containing TiAl alloys , 2020 .

[12]  Vajinder Singh,et al.  Dynamic recrystallization of a β(B2)-Stabilized γ-TiAl based Ti–45Al–8Nb–2Cr-0.2B alloy: The contributions of constituent phases and Zener-Hollomon parameter modulated recrystallization mechanisms , 2020 .

[13]  Jae-Keun Hong,et al.  Enhancing the creep resistance of electron beam melted gamma Ti–48Al–2Cr–2Nb alloy by using two-step heat treatment , 2020, Intermetallics.

[14]  R. Hu,et al.  Refinement of massive γ phase with enhanced properties in a Ta containing γ-TiAl-based alloys , 2019, Scripta Materialia.

[15]  M. Mathabathe,et al.  Phase transformation and microstructural control of the α-solidifying γ-Ti-45Al-2Nb-0.7Cr-0.3Si intermetallic alloy , 2018, Journal of Alloys and Compounds.

[16]  Michael Kastenhuber,et al.  Tailoring microstructure and chemical composition of advanced γ-TiAl based alloys for improved creep resistance , 2018, Intermetallics.

[17]  Zhihao Du,et al.  Microstructure and mechanical properties of vacuum diffusion bonding joints for γ-TiAl based alloy , 2018 .

[18]  H. Clemens,et al.  Modeling concepts for intermetallic titanium aluminides , 2016 .

[19]  Jingjie Guo,et al.  Microstructures, micro-segregation and solidification path of directionally solidified Ti-45Al-5Nb alloy , 2016 .

[20]  H. Clemens,et al.  Intermetallic titanium aluminides in aerospace applications – processing, microstructure and properties , 2016 .

[21]  R. Hu,et al.  Widmannstätten laths in Ti48Al2Cr2Nb alloy by undercooled solidification , 2015 .

[22]  J. Yi,et al.  Grain refinement by trace TiB2 addition in conventional cast TiAl-based alloy , 2015 .

[23]  Svea Mayer,et al.  Carbon distribution in multi-phase γ-TiAl based alloys and its influence on mechanical properties and phase formation , 2015 .

[24]  R. Hu,et al.  Solidification characteristics of high Nb-containing γ-TiAl-based alloys with different aluminum contents , 2015, Rare Metals.

[25]  J. Lin,et al.  Phase transformation and microstructure evolution of differently processed Ti–45Al–9Nb–Y alloy , 2012 .

[26]  B. Liu,et al.  Tuning mechanical properties for β(B2)-containing TiAl intermetallics , 2012 .

[27]  V. Imayev,et al.  Alloy design concepts for refined gamma titanium aluminide based alloys , 2007 .

[28]  Alain Lasalmonie,et al.  Intermetallics: Why is it so difficult to introduce them in gas turbine engines? , 2006 .

[29]  J. Wang,et al.  Microstructure refinement of cast TiAl alloys by β solidification , 2004 .

[30]  Jiancheng Tang,et al.  Hall–Petch relationship in two-phase TiAl alloys with fully lamellar microstructures , 2002 .

[31]  Y. Wu,et al.  Microstructural refinement and improvement of mechanical properties and oxidation resistance in EPM TiAl-based intermetallics with yttrium addition , 2002 .

[32]  R. Wagner,et al.  The compression behaviour of niobium alloyed γ-titanium alumindies , 1998 .

[33]  C. Liu,et al.  Tensile properties and fracture toughness of TiAl alloys with controlled microstructures , 1996 .

[34]  Shyh-Chin Huang,et al.  The effects of Cr additions to binary TiAl-base alloys , 1991 .

[35]  P. Peng,et al.  Phase transition and nano-mechanical properties of directionally solidified Sn–Co peritectic alloy , 2021 .

[36]  Guang Yang,et al.  Solidification microstructure characteristics of Ti–44Al–4Nb–2Cr–0.1B alloy under various cooling rates during mushy zone , 2015, Rare Metals.

[37]  Haitao Zhou,et al.  Microstructure and properties of a beta-solidifying TiAl-based alloy with different refiners , 2015, Rare Metals.

[38]  H. Inui,et al.  High-temperature structural intermetallics , 2000 .