Chemomechanical Assessment of Beams Damaged by Alkali-Silica Reaction

The alkali-silica reaction (ASR) is a chemical reaction that causes expansions and unexpected deformations of concrete structures. A methodology of assessment of ASR-damaged structures is required in order to evaluate their structural stability. Chemomechanical calculations have been performed in order to investigate the assumption of modeling ASR-induced expansions as imposed strains. The input data for the model comprises the moisture distribution in the damaged structures, ASR-induced potential strains, and the influence of ASR on the concrete mechanical properties. The results of calculations have been compared with experimental data obtained from ASR-damaged beam specimens. The role of water supply and reinforcement has been analyzed in comparing the deformations of plain and reinforced concrete beams subjected to a moisture gradient. Calculations show that cracking and compressive stresses (here induced by steel reinforcement) have a large influence on the anisotropy of the ASR swellings. This induced anisotropy is shown to be one of the main factors that should be considered while predicting the mechanical behavior of ASR-damaged structures.

[1]  Stéphane Multon,et al.  Water distribution in concrete beams , 2004 .

[2]  Catherine Larive,et al.  Apports combinés de l'expérimentation et de la modélisation à la compréhension de l'Alcali-réaction et de ses effets mécaniques , 1998 .

[3]  Alain Sellier,et al.  Orthotropic modelling of alkali-aggregate reaction in concrete structures: numerical simulations , 2003 .

[4]  L A Clark,et al.  MODELING THE STRUCUTRAL EFFECTS OF ALKALI-AGGREGATE REACTIONS ON REINFORCED CONCRETE , 1991 .

[5]  Kefei Li,et al.  Concrete ASR degradation : from material modelling to structure assessment , 2002 .

[6]  C. Hall,et al.  Water sorptivity of mortars and concretes: a review , 1989 .

[7]  Jean-Michel Torrenti,et al.  Modeling Concrete Shrinkage under Variable Ambient Conditions , 1999 .

[8]  Gamal N. Ahmed,et al.  Validation and Application of a Computer Model for Predicting the Thermal Response of Concrete Slabs Subjected to Fire , 1998 .

[9]  R N Swamy,et al.  Control of Alkali-Silica Reaction in Reinforced Concrete Beams , 1990 .

[10]  M. Mainguy,et al.  Modelisation des transferts hydriques isothermes en milieu poreux. Application au sechage des materiaux a base de ciment , 1999 .

[11]  Olivier Coussy,et al.  Thermo-chemo-mechanics of ASR expansion in concrete structures , 2000 .

[12]  N. J. Gardner,et al.  RESIDUAL STRENGTH OF REINFORCED CONCRETE BEAMS DAMAGED BY ALKALI-SILICA REACTION--EXAMINATION OF DAMAGE RATING INDEX METHOD , 2002 .

[13]  John M. Hanson,et al.  Length Expansion and Cracking of Plain and Reinforced Concrete Prisms Due to Alkali-Silica Reaction , 1998 .

[14]  Marc-André Bérubé,et al.  Laboratory assessment of alkali contribution by aggregates to concrete and application to concrete structures affected by alkali-silica reactivity , 2002 .

[15]  Stéphane Multon,et al.  Structural behavior of concrete beams affected by alkali-silica reaction , 2005 .